PANEL SWITCHES
• Sealing options :
K : IP68 to front panel components of switch only according to IEC 60529
Z : IP69K panel sealing according to DIN 40050-9
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F)
ENVIRONMENTAL SPECIFICATIONS
• Mechanical life : 150,000 cycles min.
• Panel thickness : 0.8 mm to 4.6 mm
• Recommended panel thickness : between 2 mm and 3.5 mm
GENERAL SPECIFICATIONS
• Currrent/voltage rating with resistive load :
- Silver plated contacts :
A : 5 A 24 VDC, 100,000 cycles
10 A 24 VDC, 10,000 cycles (terminals 6.35 x 0.8 only)
S : 20 A 12 V, 10,000 cycles (see “Build your part number“)
- Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength : 2,000 Vrms 50 Hz min. between terminals
• Mechanical life : 150,000 cycles min.
ELECTRICAL SPECIFICATIONS
One protected position
Patented intuitive ergonomics
Laser etched symbols
Illuminated or non-illuminated
Optionally sealed to IP69K
DISTINCTIVE FEATURES
KL series
Locking power rocker switches
The company reserves the right to change specifications without notice.
1
PANEL SWITCHES
SW-KL-1801(R1)
Locking power rocker switches
KL series
MATRIX MOUNTING
(.984 min.)
25.00 mini
(.157)
4.00
47.00 mini
(1.850 min.)
10.20
(.402)
FICHIER: CKLDE-P11
le 18/03/08
ECHELLE: 0.625
indice A
CKLDE1-A
ON
ON
SPECIFIC MATRIX MOUNTING
FOR Z VERSION
FICHIER: CKLDEZ
le 30/09/16
ECHELLE: 0.625
CKLDEZ
(1.063 min.)
27.00 mini
(.236)
6.00
48.50 mini
(1.909 min.)
11.70
(.460)
ON
ON
• Case : PA 6-6
• Actuator : ABS
• Unlocking actuator : ABS or elastomeric membrane
• Bezel : PA 6-6
• Contacts & terminals : brass, solid silver grain, silver plated
(A or S) or brass, solid silver grain, gold plated (D)
• Contact roller : brass, nickel plated
APEM products may be recycled at end-of-life for the re-claiming of valuable metal
components.
MATERIALS
• Sealing is optional. To order a sealed product, complete the
appropriate box of ordering format on the following pages.
SEALING
21.08 0/+0.3
(.830 0/+.012)
(1.449 0/+.012)
36.80 0/+0.
3
CKRDE3-C
PANEL CUT-OUT
(.984 min.)
25.00 mini
(.157)
4.00
47.00 mini
(1.850 min.)
10.20
(.402)
FICHIER: CKLDE-P11
le 18/03/08
ECHELLE: 0.625
indice A
CKLDE1-A
ON
ON
FICHIER: CKLDEZ
le 30/09/16
ECHELLE: 0.625
CKLDEZ
(1.063 min.)
27.00 mini
(.236)
6.00
48.50 mini
(1.909 min.)
11.70
(.460)
ON
ON
PANEL SWITCHES
2
PANEL SWITCHES
Function 1 *
KL31-KL41
Function 5
KL35 - KL45
Function 6
KL36-KL46
* Function 1 : Only available for 6 terminal versions,
illuminated versions only available with “A” wiring.
Function 7
KL37-KL47
Function 8
KL38-KL48
Function 9
KL39-KL49
Function 4
KL44
Function
4-1R
KL44-1R
TERMINALS
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
Screw
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
Solder lug / quick-connect
Ó
&+#
Z
Z
Normalized quick-connect 6.35x0.8
2.80x0.80
(.110x.031)
(.047DIA)
Ø1.20
Normalized quick-connect 2.8x0.8
Locking power rocker switches
KL series
ELECTRICAL FUNCTIONS AND CONNECTIONS
In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented.
For single pole models, only terminals 1, 2 and 3 are to be considered (not 6, 5, 4).
x = w/o terminal
o = with terminal
= momentary
indice B
ECHELLE: 0.45
le 25/02/10
FICHIER: CKLFUN-P4
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
321
456
321
456
321
456
321
456
321
456
321
456
321
456
321
456
123
654
CKLFUN7894-A
CKLFUN156-B
321
CKLFUN2-A
123321
123
CKLFUN1-A
123
indice B
ECHELLE: 0.45
le 25/02/10
FICHIER: CKLFUN-P4
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
321
456
321
456
321
456
321
456
321
456
321
456
321
456
321
456
123
654
CKLFUN7894-A
CKLFUN156-B
321
CKLFUN2-A
123321
123
CKLFUN1-A
123
321
456
321
456
123
654
2 POSITIONS 3 POSITIONS
Press unlocking actuator to unlock.
indice B
ECHELLE: 0.45
le 25/02/10
FICHIER: CKLFUN-P4
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
321
456
321
456
321
456
321
456
321
456
321
456
321
456
321
456
123
654
CKLFUN7894-A
CKLFUN156-B
321
CKLFUN2-A
12
33
21
123
CKLFUN1-A
123
indice B
ECHELLE: 0.45
le 25/02/10
FICHIER: CKLFUN-P4
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
123
654
321
456
321
456
321
456
321
456
321
456
321
456
321
456
321
456
123
654
CKLFUN7894-A
CKLFUN156-B
321
CKLFUN2-A
123321
123
CKLFUN1-A
123
123
3
PANEL SWITCHES
To order a complete product, fill in all the boxes of the following order guide.
BUILD YOUR PART NUMBER
NOTICE : please note that not all combinations of above numbers are available. Refer to following pages for further information.
KL series
Locking power rocker switches
ACTUATOR
TYPE
1
For non-
illuminated
application
2
For
illuminated
application
MARKING COLOR
Illuminated models
Blank White
Non-illuminated
1Blue
2Black
3Green
4Grey
5Yellow
6Red
7White
9Orange
Area A Area B
CKLMA1-A
CKLMA2-A
FICHIER: CKLMA-P3
le 18/03/08
ECHELLE: 0.625
indice A
3
2
1
6
5
4
OFF
ON
4
5
6
1
2
3
A
B
SYMBOLS
Symbols & Accessories : see end of the series.
CASE + LEDS
SERIES
KL
3Single pole
4Double pole
POLES See following pages.
WIRING
Side B
SEALING
XNo
KIP68
ZIP69K
CONTACTS
ASilver
DGold
plated
SSilver
20 A***
XNone
ALED 6 V red
BLED 6 V green
CLED 6 V yellow
MLED 6 V blue
RLED 6 V white
DLED 12 V red
ELED 12 V green
LEDS
FLED 12 V yellow
NLED 12 V blue
SLED 12 V white
JLED 24 V red
KLED 24 V green
LLED 24 V yellow
PLED 24 V blue
TLED 24 V white
etc.
*** S contacts for all functions except 5
and 4-1R - for normalized quick-connect
terminals 6.35x0.8 only.
UNLOCKING ACTUATOR COLOR
1Blue
1/4 Dark blue
2Black
3Green
4Grey
5Yellow
6Red
7Ivory
9Orange
Elastomer
YYellow
RRed
GGreen
Hard plastic (ABS)
ROCKER COLOR
1Blue
1/4 Dark blue
2Black
6Red
7Ivory
9Orange
3Green
4Grey
5Yellow
MARKING ORIENTATION
CKLMA1-A
CKLMA2-A
FICHIER: CKLMA-P3
le 18/03/08
ECHELLE: 0.625
indice A
3
2
1
6
5
4
OFF
ON
4
5
6
1
2
3
A
B
ELECTRICAL FUNCTIONS
1ON - OFF
4ON ON ON
4-1R ON ON MOM
5MOM - ON
6ON - ON
7MOM OFF MOM
8ON OFF MOM
9ON OFF ON
Function 1 only for 6-terminal versions.
Functions 5 and 6 cannot be
combined with “H” wiring.
TERMINALS
Screw
06 terminals with barrier
Normalized quick-connect
6.35x0.8
36 terminals with barrier
56 terminals w/o barrier
D10 term. with barrier
E10 term. w/o barrier
F
10 term. for use with
connector U2292 or
U3152
Normalized quick-connect
2.8x0.8
G10 term. with barrier
H10 term. w/o barrier
J10 terminals for use
with connector U2282
Solder lug/quick-connect
26 terminals with barrier
46 terminals w/o barrier
A10 term. with barrier
B10 term. w/o barrier
C10 terminals for use
with connector U2292
N
PANEL SWITCHES
4
PANEL SWITCHES
10 TERMINAL VERSION
*Function 4 : single pole in double pole case
*Function 4 : single pole in double pole case
6 TERMINAL VERSION
FICHIER: CKL49DT6S
le 30/09/16
ECHELLE: 0.625
(.433)
11.00
25.00
(.984)
47.00
(1.850)
(1.398)
35.50 26.40
(1.039)
CKL49DT6S
FICHIER: CKL49DT10S
le 30/09/16
ECHELLE: 0.625
(.433)
11.00
50.00 Max
(1.969 Max)
U2282
25.00
(.984)
47.00
(1.850)
(1.398)
35.50 26.40
(1.039)
CKL49DT10S
Locking power rocker switches
KL series
FLAT SEAL
FLAT SEAL
2-3
5-6
1-2
4-5
Single pole Double pole
KL31 KL41 ON - OFF
KL44* ON ON ON
KL44-1R* ON ON MOM
KL35 KL45 MOM -ON
KL36 KL46 ON -ON
KL37 KL47 MOM OFF MOM
KL38 KL48 ON OFF MOM
KL39 KL49 ON OFF ON
2-3
5-6
1-2
4-5
Single pole Double pole
KL31 KL41 ON - OFF
KL44* ON ON ON
KL44-1R* ON ON MOM
KL35 KL45 MOM -ON
KL36 KL46 ON -ON
KL37 KL47 MOM OFF MOM
KL38 KL48 ON OFF MOM
KL39 KL49 ON OFF ON
TERMINALS
BASIC P/N
CASE + LEDS
ACTUATOR
SCREW
0 6 terminals with barrier
SOLDER LUG / QUICK-CONNECT
2 6 terminals with barrier
4 6 terminals w/o barrier
A 10 terminals with barrier
B 10 terminals w/o barrier
C 10 terminals for use with connector U2292 or U3152
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
screw
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
Solder lug / quick-connect
5
PANEL SWITCHES
KL series
Locking power rocker switches
TERMINALS
(CONTINUED)
BASIC P/N
CASE + LEDS
ACTUATOR
NORMALIZED QUICK-CONNECT 6.35X0.8
3 6 terminals with barrier
5 6 terminals w/o barrier
D 10 terminals with barrier
E 10 terminals w/o barrier
F 10 terminals for use with connector U2292 or U3152
NORMALIZED QUICK-CONNECT 2.8X0.8
G 10 terminals with barrier
H 10 terminals w/o barrier
J 10 terminals for use with connector U2282
Normalized quick-connect 6.35x0.8 Normalized quick-connect 2.8x0.8
Ó
&+#
Z
Z
2.80x0.80
(.110x.031)
(.047DIA)
Ø1.20
CONTACT MATERIALS
BASIC P/N
CASE + LEDS
ACTUATOR
6 TERMINAL VERSION 10 TERMINAL VERSION
2 5
(.358)
9.10
11.30
(.445)
(.269)
6.85 11.30
(.445)
5.85
(.230) (.280)
7.10
ECHELLE: 0.625
le 18/03/08
FICHIER: CKLCO-P5
indice A
CKLCO-A
6
4
3
1
Terminals are marked on the case. The drawings show the maximum possible number of terminals.
2 5
(.358)
9.10
11.30
(.445)
(.269)
6.85 11.30
(.445)
5.85
(.230) (.280)
7.10
ECHELLE: 0.625
le 18/03/08
FICHIER: CKLCO-P5
indice A
CKLCO-A
6
4
3
1
A Silver
D Silver, gold plated
S Silver 20A. For all functions except 4 and 4-1R - for normalized quick-connect terminals 6.35x0.8 only.
PANEL SWITCHES
6
PANEL SWITCHES
Locking power rocker switches
KL series
SEALING
BASIC P/N
CASE + LEDS
ACTUATOR
X No sealing
K IP68 (front panel components of switch only)
Z IP69K - Installation notice available on request
Ultrasonic welding of frame to case is standard on all
versions. The ultrasonic welding and the optional panel
seal prevent water and dust from introducing into the
switch housing. K Z
optional seal optional seal
LEDS
BASIC P/N
CASE + LEDS
ACTUATOR
Side B
Complete enlarged box with one of the codes listed below.
X Without LED
Red Green Yellow Blue White Amber Red/green
6 VDC A B C M R 4 1
12 VDC D E F N S 5 2
24 VDC J K L P T 6 3
No resistor U V W Y Z 9 8
LED consumption : 20 mA @ nominal voltage (25 °C / 77 °F)
Other illumination solutions : on request.
CKLIL-A
10
9
8
7
1
2
3
4
5
6
FICHIER: CKLIL-P6
le 18/03/08
ECHELLE: 0.625
indice A
6
5
4
3
2
1
7
8
910
Side B
WIRING
BASIC P/N
CASE + LEDS
ACTUATOR
FOR 6 TERMINAL VERSIONS - LED CONNECTED TO THE LOAD
Note : If not available, terminals are added to connect the LED.
CKLRLF-A
CKLRL-P7
23.07.08
ECH 1
-
+
4
1
6
3
5
2
indice B
+-
10 9
87
CKLRLG-A
4
1
6
3
5
2
25
36
14
CKLRLA-A
25
36
14
+
-
CKLRLB-A CKLRLC-A
-
+4
1
6
3
5
2
-
+
4
1
6
3
5
2
+
-
10 9
87
CKLRLH-A
4
1
6
3
5
2
R2
R1
25
36
14
CKLRLE-B
-
+
A
standard
B C E F
The LED wiring diagram is shown on the case.
For non-stabilized on-board power supplies submitted to potential voltage surges due to the alternator, 15 V and 30 V
LED configurations are also available on request. LED Tolerance ±10 %
7
PANEL SWITCHES
KL series
Locking power rocker switches
WIRING
(CONTINUED)
BASIC P/N
CASE + LEDS
ACTUATOR
FOR 10 TERMINAL VERSIONS - INDEPENDENT LED OR INTEGRATED FUNCTIONS
G
G Standard, to have independent LED.
H To obtain 2 symbol illumination levels (night illumination when OFF and higher illumination when ON).
Dotted line = external wiring, continuous line = internal wiring
Available in Single Pole only, with H and J quick-connect terminals
I To have a polarity inversion (typical application : fan motor).
Dotted line = external wiring
Power supply betweeen 2 and 5 - Load between 1 and 4 or 3 and 6.
Available with H and J quick-connect terminals.
Please contact us for other wiring solutions.
CKLRLF-A
CKLRL-P7
23.07.08
ECH 1
-
+
4
1
6
3
5
2
indice B
+-
10 9
87
CKLRLG-A
4
1
6
3
5
2
25
36
14
CKLRLA-A
25
36
14
+
-
CKLRLB-A CKLRLC-A
-
+4
1
6
3
5
2
-
+
4
1
6
3
5
2
+
-
10 9
87
CKLRLH-A
4
1
6
3
5
2
R2
R1
25
36
14
CKLRLE-B
-
+
CKLRLF-A
CKLRL-P7
23.07.08
ECH 1
-
+
4
1
6
3
5
2
indice B
+-
10 9
87
CKLRLG-A
4
1
6
3
5
2
25
36
14
CKLRLA-A
25
36
14
+
-
CKLRLB-A CKLRLC-A
-
+4
1
6
3
5
2
-
+
4
1
6
3
5
2
+
-
10 9
87
CKLRLH-A
4
1
6
3
5
2
R2
R1
25
36
14
CKLRLE-B
-
+
H I
ACTUATOR TYPE
BASIC P/N
ACTUATOR
CASE + LEDS
1 For non-illuminated application
2 For illuminated application
ROCKER COLOR
BASIC P/N
ACTUATOR
CASE + LEDS
1 Blue
1/4 Dark blue
2 Black
3 Green
4 Grey
5 Yellow
6 Red
7 Ivory
9 Orange
Note : color 7 not available on illuminated versions
CKRRLI-A
10 9
87
4
1
6
3
5
2
PANEL SWITCHES
8
PANEL SWITCHES
Locking power rocker switches
KL series
UNLOCKING ACTUATOR
BASIC P/N
ACTUATOR
CASE + LEDS
1 Blue
1/4 Dark blue
2 Black
3 Green
4 Grey
HARD PLASTIC (ABS)
Y Yellow
R Red
G Green
ELASTOMER
MARKING ORIENTATION
BASIC P/N
ACTUATOR
CASE + LEDS
If no marking required, complete the box with code N.
Other orientations : on request
CKLMA1-A
CKLMA2-A
FICHIER: CKLMA-P3
le 18/03/08
ECHELLE: 0.625
indice A
3
2
1
6
5
4
OFF
ON
4
5
6
1
2
3
A
B
N
SYMBOLS
BASIC P/N
ACTUATOR
CASE + LEDS A
XX No symbol
Available symbols
Complete each enlarged box with the one of the codes listed on the
following pages.
Laser etching resistance
- Water and petrol resistant acccording to EN61058-1
- Tear resistant (cross-cut test) according to NF ISO 2409 : class 0
- UV resistant according to ISO 4892-2
Marking area
The symbol will be included in the hatched area.
For non-illuminated versions
CKLMA1-A
CKLMA2-A
FICHIER: CKLMA-P3
le 18/03/08
ECHELLE: 0.625
indice A
3
2
1
6
5
4
OFF
ON
4
5
6
1
2
3
A
B
B
(.551)
14.00
(.539)
13.70
6.40
(.252)
ECHELLE: 0.625
le 18/03/08
FICHIER: CKLZL-P9
indice A
CKLZL1-A
13.20
(.520) (.520)
13.20
CKLZL2-A
13.70
(.539)
14.00
(.551)
5.30
(.209)
(.209)
5.30
3.90
(.154)
(.154)
3.90
For illuminated versions
5 Yellow
6 Red
7 Ivory
9 Orange
9
PANEL SWITCHES
KL series
Locking power rocker switches
MARKING COLOR
BASIC P/N
ACTUATOR
CASE + LEDS
Blank White 1 Blue
2 Black
3 Green
4 Grey
5 Yellow
6 Red
7 White
9 Orange
ILLUMINATED MODELS - LASER ETCHING NON-ILLUMINATED MODELS - PAD PRINTING
PANEL SWITCHES
10
PANEL SWITCHES
CODE SYMBOL DESCRIPTION
16 Revolving light
17 Rear ventilator
18 Heating (0637)
19 Door opening
20 Windshield demister/
defroster (0635)
21 Windshield
wiper (0086)
22 Windshield
washer (0088)
23 Ventilator fan
(0089)
24 Side mirror
defroster
25 Restarting
pump
26 Front fog lights
(0633)
27 Rear fog lights
(0634)
28 Propulsion
system trim
29 Beacon
(1141)
30 Anchor
31 Electric motor
(0011)
CODE SYMBOL DESCRIPTION
32 Emergency first
aid vehicle (2565)
33 Load tipping (1557)
34 Loading light (2457)
35 Tractor, rear-ward
(1667)
36 Combine, direction
of movement (1678)
37 Use no forks
(2406)
38 Transmission
(1166)
39 Working spot
light (1145)
40 Engine (0640)
41 Horn (0244)
42 Lock (1656)
43 Taxi sign light (2551)
44 Working light (1204)
45 Working light
symmetric (1204)
46 -
47 -
CODE SYMBOL DESCRIPTION
XX None -
01 -
02 -
03 -
04 -
05 -
06 -
07 Stop
08 Motion
09 Up motion
10 Down motion
11 Hot
12 Cold
13 Hazard warning
(0085)
14 Traveller lighting
15 Driver lighting
(1421 )
Most symbols meet the ISO 7000 standard “graphical symbols for
use on equipment” (code given in bracket in the description).
Contact us for symbols not featured in the following tables.
K range
Power rocker switches and indicators •
symbols and accessories
The company reserves the right to change specifications without notice.
1
PANEL SWITCHES
Power rocker switches and indicators •
symbols and accessories
K range
CODE SYMBOL DESCRIPTION
90 ECAS reset
91 Driver windows
heating
92 Cruise set
93 Air bag up/down
94 Read lighting
95 Lighting main
switch
96 Heating using water
97 Low beam
98 Position lights
99 Diesel acceleration
A1 Manual mode
A2 Clockwise
cabin rotation
A3 Anticlockwise
cabin rotation
A4 -
A5 -
A6 Parking brake
A7 -
A8 -
A9 -
AA -
AB -
CODE SYMBOL DESCRIPTION
69 Engine idle control
70 Cruise res/set
71 Driver windows up/
down
72 Middle door
opening
73 Front door opening
74 Lighting in baggage
room
75 Cruise on/off
76 TV
77 Pump
78 Toilet
79 Toilet
decontamination
80 Front windshield
heating
81 Aus
82 Radiator fan
83 Remove retarder
84 Restricted speed
85 Preheater
86 ABS detection
87 ECAS detection
88 Engine stop
89 Cruise res/cancel
CODE SYMBOL DESCRIPTION
48 All wheel drive
49 Differential lock
(1662)
50 -
51 -
52 -
53 -
54 Rear window wiper
(0097)
55 Rear window
washer (0099)
56 Lower load (2223)
57 Cab lock (1560)
58 Extraction
59 Pumping in
60 Rear PTO (1572)
61 Front PTO
62 Rockshaft down
63 Rockshaft up
64 Indicator
65 Brake release
66 Baggage room
left door
67 Baggage room
right door
68 Power blinds
PANEL SWITCHES
2
PANEL SWITCHES
CODE SYMBOL DESCRIPTION
AV -
AW -
AY -
AZ -
B1 -
B2 -
B3 -
Power rocker switches and indicators •
symbols and accessories
K range
Legend scale
Depending on space available on the product (see “Symbols” section at the
end of each series).
CODE SYMBOL DESCRIPTION
AC -
AD -
AE -
AF -
AG Battery charging
condition (0247)
AH Turn signals (0084)
AJ High beam (0082)
AK Differential lock,
bogie (2600)
AL Brushing with a
rotating brush (0070)
AM Differential lock,
transfer case 4x4 (2475)
AN Loader bucket,
float (1441)
AP Loader bucket
(1437)
AQ Rear window washer
& wiper (0098)
AR Header, Header drive
(1579)
AS Excavator/backhoe
boom side shift (2091)
AT Chemical water
treatment (1851)
AU Grapple skidder, single
funct° boom (1762)
3
PANEL SWITCHES
Power rocker switches and indicators •
symbols and accessories
K range
MOUNTING PANELS
MOUNTING PANEL MIDDLE SINGLE MOUNTING PANEL
(1.152)
29.26
56.00
(2.205)
(1.043)
26.503.80
(.150)
CKRU2261-C
U2261
(2.205)
56.00
26.26
(1.034)
(.150)
3.80 26.50
(1.043)
CKRU2262-C
U2262
(.150)
3.80 26.50
(1.043)
(2.205)
56.00
32.26
(1.270)
U2267
Recommended panel thickness : 1.10 mm - 1.80 mm - 2.60 mm - 3.40 mm - 4.20 mm - 5 mm - 5.80 mm
MOUNTING PANEL CUT-OUT
(1.898 0/+.008)
48.20 0/+0.20
51.00 0/+0.20
(2.008 0/+.008)
CKRDE2-C
(3.051 0/+.008)
77.50 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(.984 0/+.008)
25.00 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
For 1 element U2267 For 2 elements U2261 For 3 elements (2xU2261 + 1x U2262)
For additional
elements, add
26.40 mm (1.039)
MOUNTING PANEL END
(NOT AVAILABLE FOR USE WITH THE KH SERIES)
PANEL SWITCHES
4
PANEL SWITCHES
Power rocker switches and indicators •
symbols and accessories
K range
22 X 44 ADAPTERS
FRONT PANEL DISMOUNTING REAR PANEL DISMOUNTING
FICHIER: CKRAD
le 02/02/10
ECHELLE: 0.625
CKRAD-3
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
CKRAD-1
50.00
(1.969)
(.748)
19.00
3.50
(.138) (.984)
25.00
CKRAD-2
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
PANEL CUT-OUT
FICHIER: CKRAD
le 02/02/10
ECHELLE: 0.625
CKRAD-3
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
CKRAD-1
50.00
(1.969)
(.748)
19.003.50
(.138) (.984)
25.00
CKRAD-2
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
FICHIER: CKRAD
le 02/02/10
ECHELLE: 0.625
CKRAD-3
44.00 0/+0.1
(1.732 0/+.004)
(.866 0/+.004)
22.00 0/+0.1
CKRAD-1
50.00
(1.969)
(.748)
19.003.50
(.138) (.984)
25.00
CKRAD-2
25.00
(.984)
(.138)
3.50 19.00
(.748)
(1.969)
50.00
Recommended panel thickness
U3060 0.60 mm to 1.50 mm
U3070 1.60 mm -0.1/0 to 5.60 mm -0.1/0 in stages of 0.40 mm
Adapter colors (replace 0 with code)
1/4 Dark blue
2 Black
4 Grey
5 Yellow
6 Red
7/1 White
U3060 U3070
ACTUATOR REMOVING TOOL
U3052
Extract actuator (KR only)
Allows the extraction of the rocker / rocker support assembly. Place
the 2 claws under the support and push as indicated by the arrow.
Extract rocker (KR only)
Allows to separate the rocker from its support. Insert the tool between
rocker and support as indicated by the arrrow. Pull out the tool in the
opposite direction.
Extract switch (KR, KL and KI)
Allows to extract switch from panel mounting units. 2 Tools are neces-
sary. Insert the tools between switch and panel mounting units from
the rear to compress the snap-in device. Pull off switch manually.
to be ordered by pairs
BLANKING CAPS
Usefull for future extensions.
Connectors can be hanged on specific hole plugs. Contact APEM.
U2271 Blue
U2271/4 Dark blue
U2272 Black
U2273 Green
U2274 Grey
1.50
(.059)
22.00
(.866)
25.00
(.984) (.248)
6.30
44.10
(1.736) (.819)
20.80
46.80
(1.843)
Recommended
panel thickness :
1.50 mm to 6 mm
U2275 Yellow
U2276 Red
U2277 Ivory
U2279 Orange
(NOT SUITABLE FOR USE WITH KH1 MODELS - 4-SIDE PROTECTION GUARDS)
5
PANEL SWITCHES
Power rocker switches and indicators •
symbols and accessories
K range
U2260
45.00
(1.772)
33.40
(1.315)
20.80
(.819)
(.433)
11.00 (.984)
25.00
CKRU2260-A
1
(1.441)
36.60
(.803)
20.40
11.00
(.433) (.961)
24.40
(1.157)
29.40
CKRU2280-A
1
(.819)
20.80
11.00
(.433)
29.40
(1.157)
24.40
(.961)
36.60
(1.441)
CKRU2290-A
U2292
U2282 U3152
CONNECTORS
Standard color : black. Other colors : on request. Connectors cannot be combined with wiring types H and I.
U2260 6 terminal version. For use with terminals type 2, 3, 4 or 5.
6.35 (1/4) tabs to be fitted by the user (example : TE42282-2).
Can be used for the KG series.
U2282 10 terminal version. For use with terminals type H or J.
2.8 (.110) tabs to be fitted by the user (example : AMP/Tyco 0-927779-3).
U2292 10 terminal version : For use with terminals type B, C, E or F.
6.35 (1/4) tabs to be fitted by the user (example : TE42282-2).
U3152 10 terminal version. For use with terminals type B, C, E or F.
6.35 (1/4) tabs to be fitted by the user (example : "Timer" terminals TE927833-2)
PANEL SWITCHES
6