SHD114211 SHD114211A SHD114211B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1047, REV. A POWER SCHOTTKY RECTIFIER Very Low Voltage Drop (S-100 for JANTXV equivalent screening; SS for JANS equivalent screening available) DESCRIPTION: A 30 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-3/3A/3B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT SYMBOL MAX. UNITS PIV 30 Volts IO 15 Amps IFSM 280 Amps CT 1100 pF 1.7 C/W Top/Tstg -65 to + 150 C SYMBOL MAX. UNITS Vf 0.49 Volts Ir 2.0 (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 25 C TJ = 125 C 0.39 MAXIMUM REVERSE CURRENT (Ir @ 30V PIV) TJ = 25 C TJ = 125 C mA 100 (c)2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD114211 SHD114211A SHD114211B SENSITRON DATA SHEET 1047, REV. A MECHANICAL DIMENSIONS: In Inches / mm .560.020 .550.020 (14.0.508) .410.010 (10.4.254) (14.2.508) .410.010 (10.4.254) .410.010 (10.4.254) .410.010 (10.4.254) .410.010 (10.4.254) .075 (1.91) Max .200.010 (5.08 .254) .410.010 (10.4.254) .015.005 (.381.127) Copper Anode .020.005 R (.508.127 ) Moly Lid .150.010 (3.81.254) .020.005 R .090 (2.29) Max Alumina Ring .075 (1.91) Max Moly Lid (.508.127 ) Alumina Ring Alumina Ring .020.002 (.508.051) Moly Bas e (Cathode) .015.002 (.381.051) Moly Base .060.010 (1.52.254) Moly Anode (Cathode) Moly Bas e .060.010 SHD-3 SHD-3A PINOUT TABLE TYPE SINGLE RECTIFIER SHD-3B PIN 1 (Base) CATHODE Typical Forward Characteristics PIN 2 ANODE Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) 102 150 C 101 150 C 125 C 101 100 C 100 75 C 50 C 10-1 25 C 10-2 125 C 100 0 10-1 0.0 0.1 0.2 0.3 0.4 0.5 Forward Voltage Drop -FV(V) 10 20 30 Reverse Voltage - RV (V) 40 Typical Junction Capacitance 25 C 0.6 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) (1.52.254) 1000 900 800 700 600 0 10 20 30 Reverse Voltage - RV (V) 40 (c)2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD114211 SHD114211A SHD114211B SENSITRON DATA SHEET 1047, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. (c)2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com