SQ3461EV
www.vishay.com Vishay Siliconix
S15-2401-Rev. A, 12-Oct-15 1Document Number: 62994
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Automotive P-Channel 12 V (D-S) 175 °C MOSFET
Marking Code: 8UY
FEATURES
• TrenchFET® power MOSFET
• AEC-Q101 qualified c
• 100 % Rg and UIS tested
• Compliant to RoHS Directive 2002/95/EC
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Notes
a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.
b. When mounted on 1" square PCB (FR4 material).
c. Package limited.
PRODUCT SUMMARY
VDS (V) -12
RDS(on) (Ω) at VGS = -4.5 V 0.025
RDS(on) (Ω) at VGS = -2.5 V 0.032
RDS(on) (Ω) at VGS = -1.8 V 0.043
ID (A) -8
Configuration Single
Package TSOP-6
S
G
D
P-Channel MOSFET
Top View
TSOP-6 Single
1
D
2
D
3
G
D
6
D
5
S
4
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Drain-Source Voltage VDS -12 V
Gate-Source Voltage VGS ± 8
Continuous Drain Current cTC = 25 °C ID
-8
A
TC = 125 °C -6.6
Continuous Source Current (Diode Conduction) IS-6.3
Pulsed Drain Current aIDM -30
Single Pulse Avalanche Current L = 0.1 mH IAS -17
Single Pulse Avalanche Energy EAS 14 mJ
Maximum Power Dissipation aTC = 25 °C PD
5W
TC = 125 °C 1.67
Operating Junction and Storage Temperature Range TJ, Tstg -55 to +175 °C
THERMAL RESISTANCE RATINGS
PARAMETER SYMBOL LIMIT UNIT
Junction-to-Ambient PCB Mount b RthJA 110 °C/W
Junction-to-Foot (Drain) RthJF 30
SQ3461EV
www.vishay.com Vishay Siliconix
S15-2401-Rev. A, 12-Oct-15 2Document Number: 62994
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.
b. Guaranteed by design, not subject to production testing.
c. Independent of operating temperature.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONS (TC = 25 °C, unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Static
Drain-Source Breakdown Voltage VDS VGS = 0 V, ID = -250 μA -12 - - V
Gate-Source Threshold Voltage VGS(th) VDS = VGS, ID = -250 μA -0.4 -0.6 -1
Gate-Source Leakage IGSS V
DS = 0 V, VGS = ± 8 V - - ± 100 nA
Zero Gate Voltage Drain Current IDSS
VGS = 0 V VDS = -12 V - - -1
μA VGS = 0 V VDS = -12 V, TJ = 125 °C - - -50
VGS = 0 V VDS = -12 V, TJ = 175 °C - - -150
On-State Drain Current a I
D(on) V
GS = -4.5 V VDS = -5 V -11 - - A
Drain-Source On-State Resistance a R
DS(on)
VGS = -4.5 V ID = -7.9 A - 0.021 0.025
Ω
VGS = -4.5 V ID = -6.6 A, TJ = 125 °C - - 0.033
VGS = -4.5 V ID = -3.5 A, TJ = 175 °C - - 0.037
VGS = -2.5 V ID = -7 A - 0.026 0.032
VGS = -1.8 V ID = -3 A - 0.036 0.043
Forward Transconductance bgfs VDS = -5 V, ID = -7.9 A - 21 - S
Dynamic b
Input Capacitance Ciss
VGS = 0 V VDS = -6 V, f = 1 MHz
- 1600 2000
pF Output Capacitance Coss - 620 770
Reverse Transfer Capacitance Crss - 490 620
Total Gate Charge c Qg
VGS = -4.5 V VDS = -6 V, ID = -7.9 A
-2128
nC Gate-Source Charge cQgs -2.5-
Gate-Drain Charge cQgd -7-
Gate Resistance Rg f = 1 MHz 2.8 5.7 8.6 Ω
Turn-On Delay Time c td(on)
VDD = -6 V, RL = 1.6 Ω
ID ≅ -7.9 A, VGEN = -4.5 V, Rg = 1 Ω
-1217
ns
Rise Time c tr -5268
Turn-Off Delay Time c td(off) -92120
Fall Time c tf -7193
Source-Drain Diode Ratings and Characteristics b
Pulsed Current a ISM ---20A
Forward Voltage VSD IF = -2 A, VGS = 0 V - -0.8 -1.2 V
SQ3461EV
www.vishay.com Vishay Siliconix
S15-2401-Rev. A, 12-Oct-15 3Document Number: 62994
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
Output Characteristics
On-Resistance vs. Drain Current
Gate Charge
Transfer Characteristics
Capacitance
On-Resistance vs. Junction Temperature
0
4
8
12
16
20
012345
ID- Drain Current (A)
VDS-Drain-to-Source Voltage (V)
VGS = 5 V thru 2 V
VGS = 1 V
VGS = 1.5 V
0.00
0.02
0.04
0.06
0.08
0.10
0 4 8 12 16 20
RDS(on) -On-Resistance (Ω)
ID-Drain Current (A)
VGS = 4.5 V
VGS = 2.5 V
VGS = 1.8 V
0
1
2
3
4
5
0 5 10 15 20 25
VGS -Gate-to-Source Voltage (V)
Qg- Total Gate Charge (nC)
ID = 7.9 A
VDS = 6 V
0
4
8
12
16
20
0.00.51.01.52.02.5
ID- Drain Current (A)
VGS -Gate-to-Source Voltage (V)
TC= - 55 °C
TC= 125 °C
TC= 25 °C
0
500
1000
1500
2000
2500
3000
036912
C - Capacitance (pF)
VDS-Drain-to-Source Voltage (V)
Ciss
Coss
Crss
0.5
0.8
1.1
1.4
1.7
2.0
- 50 - 25 0 25 50 75 100 125 150 175
RDS(on) -On-Resistance (Normalized)
TJ- Junction Temperature (°C)
ID= 7.9 A
VGS = 4.5 V
VGS = 2.5 V
SQ3461EV
www.vishay.com Vishay Siliconix
S15-2401-Rev. A, 12-Oct-15 4Document Number: 62994
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
Source-Drain Diode Forward Voltage
Threshold Voltage
Transconductance
Drain-to- Source Voltage vs. Junction Temperature
Safe Operating Area
0.001
0.01
0.1
1
10
100
0.00.20.40.60.81.01.2
IS-Source Current (A)
VSD-Source-to-Drain Voltage (V)
TJ= 25 °C
TJ= 150 °C
- 0.5
- 0.3
- 0.1
0.1
0.3
0.5
- 50 - 25 0 25 50 75 100 125 150 175
VGS(th) Variance (V)
TJ- Temperature (°C)
ID= 250 μA
ID= 5 mA
- 20
- 18
- 16
- 14
- 12
- 10
- 50 - 25 0 25 50 75 100 125 150 175
VDS-Drain-to-Source Voltage (V)
TJ- Junction Temperature (°C)
ID= 1 mA
0.01
0.1
1
10
100
0.01 0.1 1 10 100
ID- Drain Current (A)
VDS-Drain-to-Source Voltage (V)
* VGS > minimum VGS at which RDS(on) is specied
100 ms
Limited by RDS(on)*
1 ms
IDM Limited
TC= 25 °C
Single PulseBVDSS Limited
10 ms
100 μs
1 s, 10 s, DC
SQ3461EV
www.vishay.com Vishay Siliconix
S15-2401-Rev. A, 12-Oct-15 5Document Number: 62994
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
On-Resistance vs. Gate-to-Source Voltage (7.9 A) On-Resistance vs. Gate-to-Source Voltage (6.6 A)
Normalized Thermal Transient Impedance, Junction-to-Ambient
0.00
0.02
0.04
0.06
0.08
0.10
012345
RDS(on) -On-Resistance (Ω)
VGS -Gate-to-Source Voltage (V)
TJ= 150 °C
TJ= 25 °C
0.00
0.02
0.04
0.06
0.08
0.10
012345
RDS(on) -On-Resistance (Ω)
VGS -Gate-to-Source Voltage (V)
TJ= 150 °C
TJ= 25 °C
10-310-21 10 60010-1
10-4100
2
1
0.1
0.01
0.2
0.1
0.05
0.02
Single Pulse
Duty Cycle = 0.5
Square Wave Pulse Duration (s)
Normalized Effective Transient
Thermal Impedance
1. Duty Cycle, D =
2. Per Unit Base = RthJA = 90 °C/W
3. T JM - TA = PDMZthJA(t)
t1
t2
t1
t2
Notes:
4. Surface Mounted
PDM
SQ3461EV
www.vishay.com Vishay Siliconix
S15-2401-Rev. A, 12-Oct-15 6Document Number: 62994
For technical questions, contact: automostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
THERMAL RATINGS (TA = 25 °C, unless otherwise noted)
Normalized Thermal Transient Impedance, Junction-to-Foot
Note
• The characteristics shown in the two graphs
- Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C)
- Normalized Transient Thermal Impedance Junction-to-Foot (25 °C)
are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single
pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part
mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities
can widely vary depending on actual application parameters and operating conditions.
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?62994.
10-310-211010-1
10-4
2
1
0.1
0.01
0.2
0.1
0.05
0.02
Single Pulse
Duty Cycle = 0.5
Square Wave Pulse Duration (s)
Normalized Effective Transient
Thermal Impedance
Vishay Siliconix
Package Information
Document Number: 71200
18-Dec-06
www.vishay.com
1
1 2 3
Gauge Plane
L
5 4
R
R
C 0.15 M B A
b
C 0.08
0.17 Ref
Seating Plane
-C-
Seating Plane
A
1
A
2 A
-A-
D
-B-
E
1 E
L
2
(L
1
)
c
4x 1
4x 1
e
e1
1 2 3
6 5 4
C 0.15 M B A
b
-B-
E
1 E
e
e1
5-LEAD TSOP 6-LEAD TSOP
TSOP: 5/6−LEAD
JEDEC Part Number: MO-193C
MILLIMETERS INCHES
Dim Min Nom Max Min Nom Max
A 0.91 - 1.10 0.036 - 0.043
A
1 0.01 - 0.10 0.0004 - 0.004
A
2 0.90 - 1.00 0.035 0.038 0.039
b 0.30 0.32 0.45 0.012 0.013 0.018
c 0.10 0.15 0.20 0.004 0.006 0.008
D 2.95 3.05 3.10 0.116 0.120 0.122
E 2.70 2.85 2.98 0.106 0.112 0.117
E
1 1.55 1.65 1.70 0.061 0.065 0.067
e 0.95 BSC 0.0374 BSC
e
1 1.80 1.90 2.00 0.071 0.075 0.079
L 0.32 - 0.50 0.012 - 0.020
L
1 0.60 Ref 0.024 Ref
L
2 0.25 BSC 0.010 BSC
R 0.10 - - 0.004 - -
0 4 8 0 4 8
1 7 Nom 7 Nom
ECN: C-06593-Rev. I, 18-Dec-06
DWG: 5540
AN823
Vishay Siliconix
Document Number: 71743
27-Feb-04
www.vishay.com
1
Mounting LITTLE FOOTR TSOP-6 Power MOSFETs
Surface mounted power MOSFET packaging has been based on
integrated circuit and small signal packages. Those packages
have been modified to provide the improvements in heat transfer
required by power MOSFETs. Leadframe materials and design,
molding compounds, and die attach materials have been
changed. What has remained the same is the footprint of the
packages.
The basis of the pad design for surface mounted power MOSFET
is the basic footprint for the package. For the TSOP-6 package
outline drawing see http://www.vishay.com/doc?71200 and see
http://www.vishay.com/doc?72610 for the minimum pad footprint.
In converting the footprint to the pad set for a power MOSFET, you
must remember that not only do you want to make electrical
connection to the package, but you must made thermal connection
and provide a means to draw heat from the package, and move it
away from the package.
In the case of the TSOP-6 package, the electrical connections are
very simple. Pins 1, 2, 5, and 6 are the drain of the MOSFET and
are connected together. For a small signal device or integrated
circuit, typical connections would be made with traces that are
0.020 inches wide. Since the drain pins serve the additional
function of providing the thermal connection to the package, this
level of connection is inadequate. The total cross section of the
copper may be adequate to carry the current required for the
application, but it presents a large thermal impedance. Also, heat
spreads in a circular fashion from the heat source. In this case the
drain pins are the heat sources when looking at heat spread on the
PC board.
Figure 1 shows the copper spreading recommended footprint for
the TSOP-6 package. This pattern shows the starting point for
utilizing the board area available for the heat spreading copper. To
create this pattern, a plane of copper overlays the basic pattern on
pins 1,2,5, and 6. The copper plane connects the drain pins
electrically, but more importantly provides planar copper to draw
heat from the drain leads and start the process of spreading the
heat so it can be dissipated into the ambient air. Notice that the
planar copper is shaped like a “T” to move heat away from the
drain leads in all directions. This pattern uses all the available area
underneath the body for this purpose.
FIGURE 1. Recommended Copper Spreading Footprint
0.049
1.25
0.010
0.25
0.014
0.35
0.074
1.875 0.122
3.1
0.026
0.65
0.167
4.25
0.049
1.25
Since surface mounted packages are small, and reflow soldering
is the most common form of soldering for surface mount
components, “thermal” connections from the planar copper to the
pads have not been used. Even if additional planar copper area is
used, there should be no problems in the soldering process. The
actual solder connections are defined by the solder mask
openings. By combining the basic footprint with the copper plane
on the drain pins, the solder mask generation occurs automatically.
A final item to keep in mind is the width of the power traces. The
absolute minimum power trace width must be determined by the
amount of current it has to carry. For thermal reasons, this
minimum width should be at least 0.020 inches. The use of wide
traces connected to the drain plane provides a low impedance
path for heat to move away from the device.
REFLOW SOLDERING
Vishay Siliconix surface-mount packages meet solder reflow
reliability requirements. Devices are subjected to solder reflow as a
test preconditioning and are then reliability-tested using
temperature cycle, bias humidity, HAST, or pressure pot. The
solder reflow temperature profile used, and the temperatures and
time duration, are shown in Figures 2 and 3.
Ramp-Up Rate +6_C/Second Maximum
Temperature @ 155 " 15_C120 Seconds Maximum
Temperature Above 180_C70 − 180 Seconds
Maximum Temperature 240 +5/−0_C
Time at Maximum Temperature 20 − 40 Seconds
Ramp-Down Rate +6_C/Second Maximum
FIGURE 2. Solder Reflow Temperature Profile
AN823
Vishay Siliconix
www.vishay.com
2Document Number: 71743
27-Feb-04
255 − 260_C
1X4_C/s (max) 3-6_C/s (max)
10 s (max)
Reflow Zone
Pre-Heating Zone
3_C/s (max)
140 − 170_C
Maximum peak temperature at 240_C is allowed.
FIGURE 3. Solder Reflow Temperature and Time Durations
60-120 s (min)
217_C
60 s (max)
THERMAL PERFORMANCE
A basic measure of a device’s thermal performance is the
junction-to-case thermal resistance, Rqjc, or the
junction-to-foot thermal resistance, Rqjf. This parameter is
measured for the device mounted to an infinite heat sink and
is therefore a characterization of the device only, in other
words, independent of the properties of the object to which the
device is mounted. Table 1 shows the thermal performance
of the TSOP-6.
TABLE 1.
Equivalent Steady State Performance—TSOP-6
Thermal Resistance Rqjf 30_C/W
SYSTEM AND ELECTRICAL IMPACT OF
TSOP-6
In any design, one must take into account the change in
MOSFET rDS(on) with temperature (Figure 4).
0.6
0.8
1.0
1.2
1.4
1.6
−50 −25 0 25 50 75 100 125 150
VGS = 4.5 V
ID = 6.1 A
On-Resistance vs. Junction Temperature
TJ − Junction Temperature (_C)
FIGURE 4. Si3434DV
rDS(on) − On-Resiistance
(Normalized)
Application Note 826
Vishay Siliconix
www.vishay.com Document Number: 72610
26 Revision: 21-Jan-08
APPLICATION NOTE
RECOMMENDED MINIMUM PADS FOR TSOP-6
0.119
(3.023)
Recommended Minimum Pads
Dimensions in Inches/(mm)
0.099
(2.510)
0.064
(1.626)
0.028
(0.699)
0.039
(1.001)
0.020
(0.508)
0.019
(0.493)
Return to Index
Return to Index
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED