T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD INDICATOR Part Number: L-7113BR-6.35/YD Yellow Features Description z LED firmly held by spacer-no additional fixturing or glueing The Yellow source color devices are made with Gallium necessary. Arsenide Phosphide on Gallium Phosphide Yellow Light z Suitable for back panel illumination,circuit board indicator, Emitting Diode. LED indicator. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE7407 REV NO: V.9B DATE: APR/07/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001497 Selection Guide Part No. Dice L-7113BR-6.35/YD Yellow (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 10mA Lens Type Min. Typ. 21/2 10 25 30 Yellow Diffused Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE7407 REV NO: V.9B DATE: APR/07/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001497 Yellow L-7113BR-6.35/YD SPEC NO: DSAE7407 REV NO: V.9B DATE: APR/07/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001497 PACKING & LABEL SPECIFICATIONS L-7113BR-6.35/YD SPEC NO: DSAE7407 REV NO: V.9B DATE: APR/07/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001497 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAE7407 REV NO: V.9B DATE: APR/07/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102001497