3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ D Sub EMI Junction Shell
Metalized Plastic
Physical
Environmental
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Shell
Material: ABS
Plating: Nickel Over Copper
Compression Insert:
Material: Thermo Plastic Elastomer
Flammability: UL 94V-0
Durometer: 75 + / - 5
Hardware: (2) Jackscrews #4-40 × .438
(2) Saddle Washers
(2) Nuts 4-40 UNC for 9, 15 & 25 position
(3) Nuts 4-40 UNC for 37 position
(2) Screws 4-40 UNC for 9, 15 & 25 position
(3) Screws 4-40 UNC for the 37 position
Material: Steel
Plating: Zinc
Mounting Hardware: See Specification Sheet TS-0142
Temperature Rating: 0°C to +75°C
• Protection from EMI/ESD
• Easy assembly reduces time and labor to ensure
low applied cost
• Light weight, compact design
• Strain relief compensates for multiple cable
diameters
• Jackscrews provide positive retention
• RoHS* compliant
TS-0032-11
Sheet 1 of 2
Date Modified: January 15, 2007
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ D Sub EMI Junction Shell
Metalized Plastic
Table 1 - Compression Inserts
Insert
For
Dimensions
123456
G
OD ID OD ID OD ID OD ID OD ID OD ID
3357-6509 0.475
[ 12.07 ]
0.320
[8.13 ]
0.360
[ 9.14 ]
0.315
[ 8.00 ]
0.360
[ 9.14 ]
0.285
[ 7.24 ]
0.360
[ 9.14 ]
0.255
[ 6.48 ]
0.360
[ 9.14 ]
0.210
[ 5.33 ] N/A N/A 0.475
[ 12.07 ]
3357-6515
3357-6525 0.600
[ 15.24 ]
0.450
[ 11.43 ]
0.450
[ 11.43 ]
0.410
[ 10.41 ]
0.450
[ 11.43 ]
0.370
[ 9.40 ]
0.450
[ 11.43 ]
0.300
[ 7.62 ]
0.450
[ 11.43 ]
0.230
[ 5.84 ]
N/A N/A 0.600
[ 15.24 ]
3357-6537 0.810
[ 20.57 ]
0.650
[ 16.51 ]
0.700
[ 17.78 ]
0.620
[ 15.75 ]
0.655
[ 16.64 ]
0.570
[ 14.48 ]
0.655
[ 16.64 ]
0.500
[ 12.70 ]
0.655
[ 16.64 ]
0.425
[ 10.80 ]
0.655
[ 16.64 ]
0.350
[ 8.89 ]
0.810
[ 20.57 ]
Table 2- Junction Shell
3M Part
Number
Dimensions Cable O.D. Range
A B C D E F Min Max
3357-6509
0.64
[ 16.3 ]
1.22
[ 31.0 ]
1.58
[ 40.13 ] 0.40
[ 1.02 ]
0.64
[ 16.3 ]
0.984
[ 24.99 ] 0.210
[ 5.33 ]
0.320
[ 8.13 ]
3357-6515 1.54
[ 39.1 ]
1.88
[ 47.75 ]
1.312
[ 33.32 ]
3357-6525 2.09
[ 53.1 ]
1.71
[ 43.43 ]
0.52
[ 13.2 ]
0.71
[ 18.0 ]
1.857
[ 47.17 ]
0 . 2 3
[ 5.84 ]
0.45
[ 11.43]
3357-6537 2.73
[ 69.3 ]
2.12
[ 53.85 ]
0.73
[ 18.5 ]
0.91
[ 23.11 ]
2.500
[ 63.50 ]
0.35
[ 8.89]
0.65
[ 16.51 ]
TS-0032-11
Sheet 2 of 2
Connector Size
09 = 9 Position
15 = 15 Position
25 = 25 Position
37 = 37 Position
3357-65XX-XX
Ordering Information
Note:
1. Compression inserts cannot be ordered separately.
2. Use applicable Jack Screw or Jack Socket Kit mounting hardware.
3. The 37 position shell has 3 cover screw holes.
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dim ensions for R eference
Onl
y
Tolerance Unless Noted
[mm]
Inch
1
2
3
4
5
6
G (Dia Collar)
Junction Shell
see Table 2
Compression Inserts
see Table 1
D
F
AB
C
ESee note 3
Blank = Non-RoHS compliant backshells
1C = RoHS compliant backshells
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2007
