Film Capacitors - Power Electronic Capacitors MKP DC Series/Type: Ordering code: B2562* Date: Version: January 2013 8 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left bar): Film Capacitors - Power Electronic Capacitors Identification/Classification 2 (header 2 + bottom left header bar): MKP DC Ordering code: (top right header bar) B2562* Series/Type: (bottom right header bar) Preliminary data (optional): (if necessary) Department: FILM R&D / FILM P PM Date: January 2013 Version: 8 EPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Film Capacitors - Power Electronic Capacitors MKP DC B2562* Construction and general data Characteristics Standard capacitance tolerance Dielectric dissipation factor (tan o) stg Expected lifetime tLD (co) Fit rate Minimum temperature min. Maximum temperature max. Storage temperature stg Maximum hotspot temperature hs (refer to section 1) Climatic category Maximum altitude Test data Voltage between terminals VTT Voltage between terminals and case VTC Dissipation factor tan (100 Hz) Life test Cooling Degree of protection Design data Impregnation Mounting and grounding Max. torque (case) M12 stud Max. torque terminal K: 10% 2 * 10-4 -55 ... +85 C 100 000 h at hs +75C (refer to section 1) 200 (refer to section 2) -55 C + 70 C (refer to section 2) -55 ... +85 C +85 C for diameter 85 and 90 mm +75 C for diameter 116 mm 55/70/56 2000 m above sea level (derating curves available upon request) 1.5 VDC , 10s 4000 VAC, 10s 1.0 * 10-3 According to IEC 61071 Naturally air-cooled (or forced air cooling) Indoor mounting Resin filling: Non PCB, hard polyurethane (dry type) M12 threaded bolt on bottom of the aluminum case 10 Nm Female M6: 5 Nm Female M8: 6 Nm Male M8: 8 Nm Reference standards IEC 61071 RoHS compliance Certification: UL 810-5th edition (refer to table 1.3) FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 2 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* 1.1 Structure of ordering code Version: B = standard C = standard with plastic cap D = heavy duty with plastic cap S = special MKP DC Series Rated voltage: 110 * 10 = 1100 V B2562 0 B 1 427 K 10 1 Terminal type: 0 = Female M6 1 = Male M6 2 = Female M8 3 = Male M8 4 = Female M10 5 = Male M10 9 = special Rated capacitance: 7 107 = 10 * 10 pF = 100 F 427 = 42 * 107 pF = 420 F 8 108 = 10 * 10 pF = 1 mF Distance between terminals: 1 = 32 mm 2 = 35 mm 3 = 50 mm 4 = 45 mm 9 = special Capacitance tolerance J = 5% K = 10% A = special 1.2 Standard types: D (mm) OC ending Diameter (O) Terminal type 85 mm 90 mm 116 mm Female M6 (B25620) 32 0.5 -**1 45 0.5 -**4 50 0.5 -**3 standard Male M8 (B25623) standard Female M6 (B25620) available Female M6 (B25620) standard Other terminal configurations available upon request. 1.3 UL approved types: Diameter (O) 85 mm 90 mm 116 mm Series B2562xC B2562xD all types all types FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 3 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* 1.4 Drawings types: Figure 1: - B25620B - O 85mm - Female terminals (M6) - Between terminals 320.5mm Figure 2: - B25620C / B25620D - O 85mm - Female terminals (M6) - Between terminals 320.5mm O 12 O 85 0.5 O 85 0.5 32 0.5 FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 4 of 20 Film Capacitors - Power Electronic Capacitors MKP DC Figure 3 : - B25620B - O 90mm - Male terminals (M8) - Between terminals 450.5mm B2562* Figure 4: - B25620B - O 116mm - Female terminals (M6) - Between terminals 500.5mm O 116 0.5 50 0.5 O 90 0.5 45 0.5 M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types. FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 5 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* Terms and characteristics The following definitions apply to power capacitors according to IEC 61071. Rated capacitance CN Nominal value of the capacitance at 20 C and measuring frequency range of 50 to 120 Hz. Rated DC voltage VRDC Maximum operating peak voltage of either polarity but of a non-reversing type wave form, for which the capacitor has been designed, for continuous operation. Ripple voltage Vr Peak-to-peak alternating component of the unidirectional voltage. Maximum surge voltage Vs Peak voltage induced by a switching or any other disturbance of the system which is allowed for a limited number of times and duration. - Maximum duration: 50 ms / pulse - Maximum number of occurrences: 1000 (during load) Insulation voltage Vi Rms rated value of the insulation voltage of capacitive elements and terminals to case or earth. When it is not specified in the product data sheet, the insulation voltage is at least: Vi = VR 2 Maximum rate of voltage rise (dV/dt)max Maximum permissible repetitive rate of voltage rise of the operational voltage. Maximum current Imax Maximum rms current for continuous operation. Maximum peak current I Maximum permissible repetitive current amplitude during continuous operation. Maximum peak current (I) and maximum rate of voltage rise (dV/dt)max on a capacitor are related as follows: I = C * (dV/dt)max Maximum surge current I s Admissible peak current induced by a switching or any other disturbance of the system which is allowed for a limited number of times (1000 times) and duration (50 ms / pulse). Is = C * (dV/dt)s Ambient temperature A Temperature of the surrounding air, measured at 10 cm distance and 2/3 of the case height of the capacitor. Lowest operating temperature min Lowest permitted ambient temperature at which a capacitor may be energized. FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 6 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* Maximum operating temperature max Highest permitted capacitor temperature during operation, i.e. temperature at the hottest point of the case. Hot-spot temperature hs / Ths Temperature zone inside of the capacitor at hottest spot. Tangent of the loss angle of a capacitor tan Ratio between the equivalent series resistance and the capacitive reactance of a capacitor at a specified sinusoidal alternating voltage, frequency and temperature. Series resistance Rs The sum of all Ohmic resistances occurring inside the capacitor. ESR ESR (Equivalent Series Resistance) representing entire active power in capacitor. ESR = tan tan 0 = Rs + C C Thermal resistance Rth The thermal resistance indicates by how many degrees the capacitor temperature at the hot spot rises in relation to the dissipation losses. Maximum power loss Pmax Maximum permissible power dissipation for the capacitor's operation. Pmax = hs - A R th Self inductance Lself The sum of all inductive elements which are contained in a capacitor. Resonance frequency fr The lowest frequency at which the impedance of the capacitor becomes minimum. fr = 1 2 L self C R FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 7 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* VR = 700 V DC / VTT = 1050 V DC, 10s / VTC = 4000 V AC, 10s CR F 280 500 560 620 700 780 900 1240 1400 IMAX 1 A 55 60 80 55 55 65 80 80 80 Is kA 12.1 13.5 24.2 12.1 12.1 13.4 24.3 24.3 24.1 I kA 4.0 4.5 8.0 4.0 4.0 4.5 8.0 8.1 8.0 RS m 1.2 1.4 0.9 1.9 2.0 1.9 1.1 1.3 1.4 Lself nH 40 40 40 40 40 40 40 40 40 RTH K/W 5.4 3.7 4.0 3.1 2.8 2.7 2.9 2.3 2.1 D mm 85 90 116 85 85 90 116 116 116 H mm 70 95 70 120 132 132 95 120 132 Weight kg 0.45 0.73 0.88 0.71 0.87 1.00 1.13 1.40 1.55 Fig. H mm 70 73 95 98 95 70 120 123 132 135 120 132 95 145 173 176 173 120 132 173 Weight kg 0.45 0.48 0.58 0.61 0.73 0.88 0.71 0.74 0.87 0.9 0.9 1 1.13 1.2 1.1 1.13 1.3 1.4 1.55 1.945 Fig. 1 3 4 1 1 3 4 4 4 Ordering code B25620B0287K701 B25623B0507K704 B25620B0567K703 B25620B0627K701 B25620B0707K701 B25623B0787K703 B25620B0907K703 B25620B0128K743 B25620B0148K703 VR = 900 V DC / VTT = 1350V DC, 10s / VTC = 4000 V AC, 10s CR F 220 220 350 350 420 440 480 480 550 550 580 650 700 730 750 750 830 970 1100 1500 1 IMAX 1 A 50 50 50 50 60 65 55 55 50 50 62 62 70 62 55 55 58 75 75 80 Is kA 10.8 10.8 10.7 10.7 11.9 21.7 10.8 10.8 11 11 11.9 11.8 21.5 11.8 23.1 23.1 23.5 21.7 21.7 43 I kA 3.6 3.6 3.6 3.6 4.0 7.2 3.6 3.6 3.7 3.7 4.0 3.9 7.1 3.9 7.7 7.7 7.8 7.2 7.2 15.4 RS m 1.3 1.3 1.7 1.7 1.5 1.1 2.8 2.1 2.3 2.3 1.9 2.1 1.2 2.2 1.2 1.2 0.7 1.4 1.6 1.1 Lself nH 40 40 40 40 40 40 40 40 40 40 40 40 40 60 60 60 60 40 40 60 RTH K/W 5.4 5.4 3.9 3.9 3.7 3.8 3.1 3.1 2.8 2.8 3.0 2.7 2.9 2.4 2.2 2.2 2.1 2.3 2.1 1.6 D mm 85 85 85 85 90 116 85 85 85 85 90 90 116 90 85 85 90 116 116 116 1 2 1 2 3 4 1 2 1 2 3 3 4 3 1 2 3 4 4 4 Ordering code B25620B0227K881 B25620C0227K881 B25620B0357K881 B25620C0357K881 B25623B0427K904 B25620B0447K883 B25620B0487K881 B25620C0487K881 B25620B0557K881 B25620C0557K881 B25623B0587K904 B25623B0657K904 B25620B0707K883 B25623B0737K904 B25620B0757K881 B25620C0757K881 B25623B0837K904 B25620B0977K883 B25620B0118K883 B25620B0158K883 IMAX at 40C, refer to "current derating" section for more details Other configurations and capacitance tolerances available upon request FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 8 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* VR = 1100 V DC / VTT = 1650 V DC, 10s / VTC = 4000 V AC, 10s CR F 140 140 220 270 280 310 310 370 400 400 400 420 420 420 420 450 450 470 480 480 530 610 610 700 700 940 1100 1500 IMAX 1 A 50 50 54 55 75 50 50 56 63 63 75 63 63 75 56 75 80 56 80 80 53 80 80 80 80 80 80 80 Is kA 8.6 8.6 9.5 9.6 17.2 8.6 8.6 9.5 8.8 8.8 17.3 8.8 8.8 17.3 9.5 16.5 17.3 9.5 17.3 17.3 18.8 16.8 17 16.8 27 32.7 30.8 32.5 I kA 2.9 2.9 3.2 3.2 5.7 2.9 2.9 3.2 2.9 2.9 5.8 2.9 2.9 5.8 3.2 5.4 5.8 3.2 5.8 5.8 6.3 5.6 5.7 5.6 8.9 11 10.3 10.8 RS m 1.4 1.4 1.5 1.7 1.0 2.3 2.3 2.2 2.4 2.4 1.5 2.4 2.4 1.5 2.4 1.3 1.0 2.6 1.0 1.0 0.8 3.13 1.1 1.7 1.1 0.7 0.8 0.9 Lself nH 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 60 40 60 60 60 40 60 40 60 60 100 90 RTH K/W 5.4 5.4 4.3 3.7 4 3.1 3.1 3.0 2.8 2.8 2.2 2.8 2.8 2.2 2.7 2.9 2.2 2.4 2.2 2.2 2.1 2.3 1.7 2.1 1.7 1.6 1.3 1 D mm 85 85 90 90 116 85 85 90 85 85 85 85 85 85 90 116 85 90 85 85 90 116 85 116 116 116 116 116 H mm 70 73 83 95 70 120 123 120 132 135 151 135 138 151 132 95 176 145 173 176 173 120 226 132 176 173 223 295 Weight kg 0.45 0.48 0.53 0.73 0.9 0.71 0.73 0.9 0.87 0.9 1 0.87 0.9 1 1 1.13 1.05 1.2 1.05 1.08 1.3 1.4 2.2 1.55 2.05 2.06 2.56 2.8 Fig. 1 2 3 3 4 1 2 3 1 2 2 1 2 2 3 4 2 3 1 2 3 4 2 4 4 4 4 4 Ordering code B25620B1147K101 B25620C1147K101 B25623B1227K104 B25623B1277K104 B25620B1287K103 B25620B1317K101 B25620C1317K101 B25623B1377K104 B25620B1407K101 B25620C1407K101 B25620D1407K101 B25620B1427A101* B25620C1427A101* B25620D1427K101 B25623B1427K104 B25620B1457K103 B25620D1457K101 B25623B1477K104 B25620B1487K101 B25620C1487K101 B25623B1537K104 B25620B1617K103 B25620D1617K101 B25620B1707K103 B25620D1707K103 B25620B1947K103 B25620B1118K103 B25620B1158K103 * Capacitance tolerance A: -15% ... 0% 1 IMAX at 40C, refer to "current derating" section for more details Other configurations and capacitance tolerances available upon request FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 9 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* VR = 1200 V DC / VTT = 1800 V DC, 10s / VTC = 4000 V AC, 10s CR F 220 300 340 360 440 500 550 570 730 1000 IMAX 1 A 50 50 50 70 52 75 80 75 80 80 Is kA 8.6 8.5 8.5 15.223 17.1 15.379 16.917 15.429 30.869 30.758 I kA 2.9 2.8 2.8 5.074 5.7 5.126 5.639 5.143 10.29 10.253 RS m 1.9 2.4 2.6 1.341 0.8 1.614 0.987 1.751 0.69 0.807 Lself nH 40 40 40 40 60 40 90 40 60 90 RTH K/W 3.7 3.0 2.7 2.9 2.1 2.29 1.59 2.07 1.59 1.23 D mm 90 90 90 116 90 116 90 116 116 116 H mm 95 120 132 95 173 120 223 133 173 223 Weight kg 0.73 0.9 1 1.13 1.3 1.4 1.4 1.55 2.05 2.56 Fig. H mm 95 120 123 120 132 135 132 95 145 173 176 173 120 132 173 273 Weight kg 0.73 0.71 0.73 0.9 0.87 0.9 1 1.13 1.2 1.05 1.08 1.3 1.4 1.55 2.05 2.8 Fig. 3 3 3 4 3 4 3 4 4 4 Ordering code B25623B1227K204 B25623B1307K204 B25623B1347K204 B25620B1367K203 B25623B1447K204 B25620B1507K203 B25623B1557K204 B25620B1577K203 B25620B1737K203 B25620B1108K203 VR = 1320 V DC / VTT = 1980 V DC, 10s / VTC = 4000 V AC, 10s CR F 190 220 220 250 260 260 290 310 330 340 340 370 420 480 660 1000 IMAX 1 A 51 45 45 51 45 45 52 65 52 70 70 50 65 70 70 80 Is kA 8.1 7.4 7.4 7.7 7.6 7.6 7.9 14.3 7.9 14.8 14.8 15.7 14.1 14.1 27.8 26.4 I kA 2.7 2.5 2.5 2.6 2.6 2.6 2.6 4.8 2.6 5 5 5.2 4.7 4.7 9.3 8.8 RS m 1.9 2.6 2.6 2.5 2.7 2.7 2.7 1.4 3.0 0.9 0.9 0.8 1.7 1.8 0.8 1 Lself nH 40 40 40 40 40 40 40 40 60 60 60 60 40 40 90 90 RTH K/W 3.7 3.1 3.1 3.0 2.8 2.8 2.7 2.9 2.4 1.6 1.6 2.1 2.3 2.1 1.6 1 D mm 90 85 85 90 85 85 90 116 90 85 85 90 116 116 116 116 Ordering code 3 B25623B1197K304 1 2 3 1 2 3 4 3 1 2 3 4 4 4 4 B25620B1227K321 B25620C1227K321 B25623B1257K304 B25620B1267K321 B25620C1267K321 B25623B1297K304 B25620B1317K323 B25623B1337K304 B25620B1347K321 B25620C1347K321 B25623B0377K304 B25620B1427K323 B25620B1487K323 B25620B1667K323 B25620B1108K323 1 IMAX at 40C, refer to "current derating" section for more details Other configurations and capacitance tolerances available upon request FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 10 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* VR = 1980 V DC / VTT = 2970 V DC, 10s / VTC = 4000 V AC, 10s CR F 40 40 70 70 145 145 190 215 295 460 IMAX 1 A 35 35 40 40 50 50 60 60 70 80 Is kA 4.5 4.5 4.9 4.9 10 10 18.9 9.6 18.8 18.2 I kA 1.5 1.5 1.6 1.6 3.4 3.4 6.3 3.2 6.3 6 RS m 2.1 2.1 2.8 2.8 1.1 1.1 0.7 2.4 0.8 1.1 Lself nH 60 60 60 60 60 60 60 40 60 90 RTH K/W 5.4 5.4 4 4 2.2 2.2 2.3 2.1 1.6 1 D mm 85 85 85 85 85 85 116 116 116 116 H mm 70 73 95 98 173 176 120 132 173 263 Weight kg 0.45 0.48 0.58 0.61 1.05 1.08 1.4 1.55 2.05 2.6 Fig. 1 2 1 2 1 2 4 4 4 4 Ordering Code B25620B1406K981 B25620C1406K981 B25620B1706K981 B25620C1706K981 B25620B1147K981 B25620C1147K981 B25620B1197K983 B25620B1217K983 B25620B1297K983 B25620B1467K983 1 IMAX at 40C, refer to "current derating" section for more details Other configurations and capacitance tolerances available upon request FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 11 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* 2. Expected lifetime Expected Lifetim e @ t L D 70C 75C 80C V/Vn 1,1 1,05 1 0,95 0,9 0,5 0,7 0,9 1,1 t L D /t L D ( c o ) 1,3 1,5 Expected lifetime tld at different hotspot temperature (hs) and voltage V For short term operation (maximum 10% of the total expected lifetime) and capacitors with diameter 85 and 90 mm a maximum hot spot temperature of 85C is allowed without further reduction of the lifetime. 3. Current derating 3.1 Current derating graphs for capacitors 700 V DC B25620B0287K701 B25620B0627K701 Current Derating @ Ths = 75 C 55 50 45 40 35 30 25 20 40 45 50 55 T e m p. ( C ) 60 65 70 B25620B0707K701 40 45 50 40 45 50 55 T e m p. ( C ) 60 65 70 B25620B0567K703 Current Derating @ Ths = 75 C 60 55 50 45 40 35 30 25 20 Current Derating @ Ths = 75 C 60 55 50 45 40 35 30 25 20 55 T e m p. ( C ) 60 65 Current Derating @ Ths = 75 C 80 70 60 50 40 30 70 40 45 FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. 50 55 T e m p. ( C ) 60 65 70 January 2013 - Version 8 Page 12 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B25620B0907K703 B25620B0128K743 Current Derating @ Ths = 75 C 80 70 60 50 40 30 40 45 50 55 T e m p. ( C ) 60 65 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 40 35 70 B25620B0148K703 80 75 70 65 60 55 50 45 40 35 B2562* 40 45 50 55 T e m p. ( C ) 60 65 70 B25620B0507K704 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) Current Derating @ Ths = 75 C 60 55 50 45 40 35 30 25 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) B25620B0787K704 65 Current Derating @ Ths = 75 C 55 45 35 25 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) 3.2 Current derating graphs for capacitors 1100 V DC B25620B1147K101 B25620B1287K103 FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 13 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B25620B1317K101 B25620B1407K101/B25620B1427A101 Current Derating @ Ths = 75 C 65 60 55 50 45 40 35 30 40 B25620D1427K101 80 75 70 65 60 55 50 45 40 35 30 B25620B1457K103 80 75 70 65 60 55 50 45 40 35 30 40 43 46 49 52 55 58 61 64 67 70 B25620B1617K103 Current Derating @ Ths = 75 C T e m p. ( C ) B25620D1617K101 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 40 35 70 60 50 40 30 50 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) 45 70 B25620B1487K101 Current Derating @ Ths = 75 C 40 60 T e m p. ( C ) T e m p. ( C ) 80 Temp. (C) 40 43 46 49 52 55 58 61 64 67 70 40 43 46 49 52 55 58 61 64 67 70 75 70 65 60 55 50 45 40 35 30 50 B25620D1457K101 Current Derating @ Ths = 75 C 75 70 65 60 55 50 45 40 35 30 B2562* 55 60 T e m p. ( C ) 65 70 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 14 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B25620B1707K103 B25620D1707K103 Current Derating @ Ths = 75 C 80 60 50 40 30 45 50 55 60 T e m p. ( C ) 65 40 43 46 49 52 55 58 61 64 67 70 70 B25620B1947K103 T e m p. ( C ) B25620B1118K103 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) T e m p. ( C ) B25620B1158K103 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 40 43 46 49 52 55 58 61 64 67 70 B25620B1227K104 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 40 70 40 B2562* Current Derating @ Ths = 75 C 55 50 45 40 35 40 43 46 49 52 55 58 61 64 67 70 40 T e m p. ( C ) B25620B1277K104 55 50 45 40 35 30 25 20 45 50 T e m p. ( C ) 55 60 B25620B1377K104 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) 55 50 45 40 35 30 25 20 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 15 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B25620B1427K104 55 50 45 40 35 30 25 20 Current Derating @ Ths = 75 C B2562* B25620B1477K104 Current Derating @ Ths = 75 C 55 50 45 40 35 30 25 20 40 43 46 49 52 55 58 61 64 67 70 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) T e m p. ( C ) B25620B1537K104 80 75 70 65 60 55 50 45 40 35 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) 3.3 Current derating graphs for capacitors 1200 V DC B25620B1227K204 50 45 40 35 30 25 20 Current Derating @ Ths = 75 C B25620B1307K204 50 45 40 35 30 25 20 40 43 46 49 52 55 58 61 64 67 70 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) B25620B1347K204 50 45 40 35 30 25 20 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) Current Derating @ Ths = 75 C T e m p. ( C ) B25620B1447K204 80 70 60 50 40 30 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 16 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B25620B1557K204 B25620B1367K203 Current Derating @ Ths = 75 C 80 75 70 65 60 55 50 45 40 35 70 65 60 55 50 45 40 35 30 T e m p. ( C ) B25620B1507K203 T e m p. ( C ) B25620B1577K203 Current Derating @ Ths = 75 C 75 70 65 60 55 50 45 40 35 30 40 43 46 49 52 55 58 61 64 67 70 B25620B1737K203 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) 80 75 70 65 60 55 50 45 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 40 43 46 49 52 55 58 61 64 67 70 75 70 65 60 55 50 45 40 35 30 B2562* T e m p. ( C ) B25620B1108K203 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) 80 75 70 65 60 55 50 45 Current Derating @ Ths = 75 C 40 43 46 49 52 55 58 61 64 67 70 T e m p. ( C ) Current derating graphs for capacitors rated 900 / 1320 / 1980 V DC are available upon request. FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 17 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* 4. FIT FIT Rate 10000 FIT 1000 100 10 1 0,8 0,9 1 1,1 1,2 V/Vnx Un Voltage hs 60 C 65 C 70 C FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. 75 C 80 C January 2013 - Version 8 Page 18 of 20 Film Capacitors - Power Electronic Capacitors MKP DC B2562* Cautions and warnings In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at all. Check tightness of the connections/terminals periodically. The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit the capacitor before handling. Failure to follow cautions may result, worst case, in premature failures, bursting and fire. EPCOS AG is not responsible for any kind of possible damages to persons or things due to improper installation and application of capacitors for power electronics. Safety Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical disruption of the capacitor. Ensure good, effective grounding for capacitor enclosures. Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy contained in capacitors). Handle capacitors carefully, because they may still be charged even after disconnection. The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized. Follow good engineering practice. Thermal load After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceeded at extreme service conditions. Mechanical protection The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided. Storage and operating conditions Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals is required to avoid conductive path between phases and/or phases and ground. The maximum storage temperature is 85 C. Service life expectancy Electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors, too. The maximum service life expectancy may vary depending on the application the capacitor is used in. FILM R&D / FILM P PM Please read Cautions and warnings and Important notes at the end of this document. January 2013 - Version 8 Page 19 of 20 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 20 of 20