PLT0805Z1172ABTF - Vishay Presicion Group

PLT

www.vishay.com Vishay Dale Thin Film

Revision: 02-Aug-11 1Document Number: 60030

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Precision Low TCR Thin Film Resistor, Surface Mount Chip,

± 5 ppm/°C TCR, 0.01 % Tolerance

Vishay’s proven precision thin film wraparound resistors will

meet your exact requirements. These resistors are ideal for

precision applications requiring low noise, stability, ultra low

temperature coefficient of resistance, and low voltage

coefficient. The chip resistors are available in any resistance

ohmic value in the range specified below.

CONSTRUCTION

FEATURES

• TCR of ± 5 ppm/°C standard

• Tolerances to ± 0.01 %

• Anti corrosion resistant film with (SPM) special

passivation method

• Stable film and performance characteristics

(R ± 0.04 % at 70 °C, 10 000 h)

• Non-standard resistance values available

• Very low noise and voltage coefficient

(< - 30 dB, 0.1 ppm/V)

• UL 94 V-0 flame resistant

• Compliant to RoHS Directive 2002/95/EC

• Halogen-free according to IEC 61249-2-21 definition

Note

*Pb containing terminations are not RoHS compliant, exemptions

may apply

TYPICAL PERFORMANCE

Actual Size 0603

Adhesion Layer

High Purity

Alumina Substrate

Nickel Barrier

Solder

Coating

SPM Passivation

Enhancement

Passivated Nichrome

Resistive Film

ABSOLUTE

TCR 5

TOL. 0.01

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome -

Resistance Range 100  to 775 k-

TCR: Absolute ± 5 ppm/°C - 55 °C to + 125 °C

Tolerance: Absolute ± 0.1 % to ± 0.01 % + 25 °C

Stability: Absolute R ± 0.02 % 2000 h at 70 °C

Stability: Ratio --

Voltage Coefficient ± 0.1 ppm/V (typical) -

Working Voltage 75 V to 200 V -

Operating Temperature Range - 55 °C to + 125 °C -

Storage Temperature Range - 55 °C to + 150 °C -

Noise < - 35 dB (typical) -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C

COMPONENT RATINGS

CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE ()

0603 150 75 100 to 130K

0805 250 100 100 to 260K

1206 400 200 100 to 775K

PLT

www.vishay.com Vishay Dale Thin Film

Revision: 02-Aug-11 2Document Number: 60030

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Preferred packaging code

DIMENSIONS in inches

CASE SIZE TERM L W T D E

0603 B 0.064 ± 0.006 0.032 ± 0.005 0.020 max. 0.012 ± 0.005 0.015 ± 0.005

0805 B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005

1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010

ENVIRONMENTAL TESTS - TYPICAL

ENVIRONMENTAL TEST 10 k R ±

(%)

100 k R ±

(%)

Thermal Shock 0.02 0.02

Short Time Overload 0.01 0.01

Low Temperature Operation 0.01 0.01

Resistance to Solder Heat 0.01 0.01

Moisture Resistance 0.02 0.02

High Temperature Exposure 0.02 0.02

Load Life (10 000 h, + 70 °C) 0.04 0.04

TCR ± 5 ppm/°C ± 5 ppm/°C

DERATING CURVE

Ambient Temperature °C

0 70 125 150

100

Precent of Rated Power

GLOBAL PART NUMBER INFORMATION

GLOBAL

MODEL

CASE

SIZE

TCR

CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING

PLT 0603

0805

1206

Z = ± 5 ppm/°C The first 3 digits are

significant figures and

the last digit specifies

the number of zeros to

follow. “R” designates

the decimal point.

Example:

1001 = 1 k

2500 = 250 

Special values with more

than 4 significant figures,

use a R for value below

1 k and a K for values

greater than 1 k to

signify a decimal point.

982R6 = 982.6 

532R41 = 532.41 

L = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.1 %

B = Wraparound Sn/Pb

solder w/Ni barrier

(63 % Sn/37 % Pb w/

nickel barrier)

S = Wraparound

lead (Pb)-free solder

96.5 % Sn/3.0 % Ag/

0.5 % Cu

RoHS compliant - e1

= WAFFLE PACK

TAPE AND REEL

= 100 min., 100 mult

= 1000 min., 1000 mult

(1)

= 300 min., 300 mult

= 500 min., 500 mult

= Full reel

= 100 min., 1 mult

03Z1 01Q00 BT1TPL 6

Document Number: 91000 www.vishay.com

Revision: 11-Mar-11 1

Disclaimer

Legal Disclaimer Notice

Vishay

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.