PLT www.vishay.com Vishay Dale Thin Film Precision Low TCR Thin Film Resistor, Surface Mount Chip, 5 ppm/C TCR, 0.01 % Tolerance FEATURES * TCR of 5 ppm/C standard * Tolerances to 0.01 % * Anti corrosion resistant film with (SPM) special passivation method * Stable film and performance characteristics (R 0.04 % at 70 C, 10 000 h) * Non-standard resistance values available * Very low noise and voltage coefficient (< - 30 dB, 0.1 ppm/V) * UL 94 V-0 flame resistant * Compliant to RoHS Directive 2002/95/EC * Halogen-free according to IEC 61249-2-21 definition Actual Size 0603 Vishay's proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for precision applications requiring low noise, stability, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. Note * Pb containing terminations are not RoHS compliant, exemptions may apply CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Solder Coating TYPICAL PERFORMANCE ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 5 TOL. 0.01 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material Resistance Range Passivated nichrome - 100 to 775 k - TCR: Absolute Tolerance: Absolute Stability: Absolute 5 ppm/C - 55 C to + 125 C 0.1 % to 0.01 % + 25 C R 0.02 % 2000 h at 70 C Stability: Ratio Voltage Coefficient Working Voltage CONDITIONS - - 0.1 ppm/V (typical) - 75 V to 200 V - Operating Temperature Range - 55 C to + 125 C - Storage Temperature Range - 55 C to + 150 C - Noise Shelf Life Stability: Absolute < - 35 dB (typical) - R 0.01 % 1 year at + 25 C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0603 150 75 100 to 130K 0805 250 100 100 to 260K 1206 400 200 100 to 775K Revision: 02-Aug-11 1 Document Number: 60030 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0603 B 0.064 0.006 0805 B 0.080 0.006 0.032 0.005 0.020 max. 0.012 0.005 0.015 0.005 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1206 B 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 ENVIRONMENTAL TESTS - TYPICAL DERATING CURVE 100 k R (%) Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.01 0.01 Moisture Resistance 0.02 0.02 High Temperature Exposure 0.02 0.02 Load Life (10 000 h, + 70 C) 0.04 0.04 5 ppm/C 5 ppm/C ENVIRONMENTAL TEST TCR 100 Precent of Rated Power 10 k R (%) 80 60 40 20 0 0 70 125 150 Ambient Temperature C GLOBAL PART NUMBER INFORMATION P L T 0 6 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PLT 0603 0805 1206 Z = 5 ppm/C 0 3 Z 1 RESISTANCE TOLERANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. L = 0.01 % Q = 0.02 % A = 0.05 % B = 0.1 % Example: 1001 = 1 k 2500 = 250 0 0 1 TERMINATION Q B T 1 PACKAGING B = Wraparound Sn/Pb WS = WAFFLE PACK solder w/Ni barrier (63 % Sn/37 % Pb w/ TAPE AND REEL nickel barrier) T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (1) S = Wraparound T3 = 300 min., 300 mult lead (Pb)-free solder T5 = 500 min., 500 mult 96.5 % Sn/3.0 % Ag/ TF = Full reel 0.5 % Cu TS = 100 min., 1 mult RoHS compliant - e1 Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. 982R6 = 982.6 532R41 = 532.41 Note (1) Preferred packaging code Revision: 02-Aug-11 2 Document Number: 60030 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1