High Reliability Slotted Optical Switch OPB870, OPB871, OPB872 (TX, TXV) L Features: * * * * * * 0.125" (3.175 mm) slot width Choice of aperture (0.050" or 0.010" width) PCBoard mounting TX and TXV devices processed to MIL-PRF-19500 S level processing available Hermetically sealed components N T Product Photo Here P Description: Each OPB870, OPB871 and OPB872 (TX, TXV) phototransistor device provides the flexibility of a custom device from a standard product line. Building from a standard housing with a 0.125" (3.175 mm) wide slot and 0.425" ( mm) leads for PCBoard mounting, a user can choose aperture width, opaque or IR transmissive housing shell material and mounting tab configuration. Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and near-infrared light. Discrete shells exposed on the parallel faces inside each device's throat are made from either IR transmissive plastic (for applications where dust protection is needed) or from opaque plastic with aperture openings (for applications that require maximum protection against ambient light). TX and TXV devices are processed to OPTEK's military screening program patterned after MIL-PRF-19500. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Contact your local representative or OPTEK for more information. Applications: * * * * * * Non-contact object sensing Assembly line automation Machine automation Equipment safety Machine safety Military and harsh environments RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 10/2011 Page 1 of 6 High Reliability Slotted Optical Switch OPB870, OPB871, OPB872 (TX, TXV) Part Number Guide -- OPB870, OPB871, OPB872 (TX, TXV) OPB 8 X X X X X T X V TX and TXV processed to MIL-PRF-19500 Optek Assembly Phototransistor Output Family Sensor Aperture: 1 -- 0.010" (0.254 mm) 5 -- 0.050" (1.270 mm) Discrete Shell Material: 7 -- Base mount opaque Plastic discrete shell PC mountable leads Emitter Aperture: 1 -- 0.010" (0.254 mm) 5 -- 0.050" (1.270 mm) Electrical Specification Variations: 0 = Electrical Parameter A (lead spacing = 0.320") 1 = Electrical Parameter B (lead spacing = 0.320") 2 = Electrical Parameter C (lead spacing = 0.320") Mounting Configurations: N -- No mounting tabs L -- Emitter side mounting tab only T -- Two mounting tabs P -- Phototransistor side mounting tab only Note: Assemblies with dual 0.010" apertures are currently available only with electrical E / Clear Top Denotes LED S / Black Top Denotes Sensor 1 3 2 4 Pin # Emitter Pin # Transistor/Diode DIMENSIONS ARE IN: [MILLIMETERS] INCHES 1 Anode 3 Collector / Anode 2 Cathode 4 Emitter / Cathode CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries' Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK's molded plastics. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 10/2011 Page 2 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Slotted Optical Switch OPB870, OPB871, OPB872 (TX, TXV) Absolute Maximum Ratings (TA = 25 C unless otherwise noted) Storage Temperature(1) Operating Temperature -65 C to +150 C (1) Lead Soldering Temperature -65 C to +125 C (3) 240 C Input LED Forward DC Current 50 mA Peak Forward Current (1s pulse width, 300 pps) 1.0 A Reverse DC Voltage 2.0 V Power Dissipation (2) 100 mW Output Phototransistor/Diode Collector-Emitter Voltage 50 V Emitter-Collector Voltage 7.0 V Collector DC Current Power Dissipation Notes: (1) (2) (3) (4) 30 mA 100 mW(2) Derate linearly 1.00 mW/ C above 25 C. Cleaning agents methanol and isopropanol are recommended. Spray or wipe; do not submerge. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. All parameters were tested using pulse technique. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 10/2011 Page 3 of 6 High Reliability Slotted Optical Switch OPB870, OPB871, OPB872 (TX, TXV) Electrical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Transistor/Diode VF Forward Voltage 1.00 1.20 0.80 - 1.70 1.90 1.60 V IF = 20.0 mA IF = 20.0 mA, TA = -55C IF = 20.0 mA, TA = -100C IR Reverse Current - - 10 A VR = 2.0 VDC Output Transistor V(BR)CEO Collector-Emitter Breakdown Voltage 50 - - V IC = 1.0 mA, IF = 0 V(BR)ECO Emitter-Collector Breakdown Voltage 7.0 - - V IE = 100 A, IF = 0 - 100 100 nA A VCE = 10.0 V, IF = 0 VCE = 10.0 V, IF = 0, TA = 100C 500 200 200 - - A VCE = 10.0 V, IF = 20.0 mA VCE = 10.0 V, IF = 20.0 mA, TA = -55C VCE = 10.0 V, IF = 20.0 mA, TA = 100C Parameter B OPB871 OPB871 OPB871 1000 400 400 - - Parameter C OPB872 OPB872 OPB872 1800 800 800 - - Collector-Emitter Saturation Voltage OPB870 OPB871 OPB872 - - 0.30 0.30 0.30 V IC = 400 A, IF = 20.0 mA IC = 800 A, IF = 10.0 mA IC = 1800 A, IF = 20.0 mA tr Output Rise Time OPB870 OPB871 OPB872 - - 15.0 20.0 20.0 s VCC = 10.0 V IF = 20.0 mA RL = 1000 tf Output Fall Time OPB870 OPB871 OPB872 - - 15.0 20.0 20.0 s VCC = 10.0 V IF = 20.0 mA RL = 1000 IC(off) Collector-Emitter Dark Current Coupled IC(ON) On-State Collector Current(4) Parameter A OPB870 OPB870 OPB870 VCE(SAT) A A VCE = 5.0 V, IF = 10.0 mA VCE = 5.0 V, IF = 10.0 mA, TA = -55C VCE = 5.0 V, IF = 10.0 mA, TA = 100C VCE = 0.4 V, IF = 20.0 mA VCE = 0.4 V, IF = 20.0 mA, TA = -55C VCE = 0.4 V, IF = 20.0 mA, TA = 100C OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 10/2011 Page 4 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com High Reliability Slotted Optical Switch OPB870, OPB871, OPB872 (TX, TXV) Aperture Configuration Flag Next Emitter OPB370N51 - Flag51in- Middle of to Slot Aperture Configuration 51Next - FlagtoNext to Sensor OPB370N51 - Flag Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 Left to Right Right to Left 0.60 0.40 0.20 Left to Right Right to Left 0.60 0.40 0.20 0.00 0.00 0.80 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 Displacement Distance (inches) 0.10 0.15 0.20 0.25 Displacement Distance (inches) Aperture Configuration 51 in - Flag in Middle OPB370N51 - Flag Middle of Slotof Slot 1.20 Top to Bottom Typical IC(ON) Response (mA) 1.00 0 Top to Bottom 0.80 Left to Right Right to Left 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0 0.20 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 10/2011 Page 5 of 6 High Reliability Slotted Optical Switch OPB870, OPB871, OPB872 (TX, TXV) ApertureOPB380T55 Configuration 55 -Next FlagtoNext to Emitter - Flag Emitter Aperture Configuration 55Next - Flag to Sensor OPB380T55 - Flag toNext Sensor 1.20 1.20 Top to Bottom Top to Bottom 1.00 Typical IC(ON) Response (mA) Typical IC(ON) Response (mA) 1.00 0.80 Right to Left Left to Right 0.60 0.40 0.20 0.80 Right to Left Left to Right 0.60 0.40 0.20 0.00 0.00 0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 Displacement Distance (inches) 0.10 0.15 0.20 0.25 Displacement Distance (inches) Aperture Configuration Flag in of Middle OPB380T55 - Flag55in- Middle Slot of Slot 1.20 Top to Bottom Typical IC(ON) Response (mA) 1.00 0 Top to Bottom 0.80 Right to Left Left to Right 0.60 Emitter Left to Right Right to Left 0.40 Sensor 0 0.20 Width 0.00 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 10/2011 Page 6 of 6 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com