LMH0344 LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer Literature Number: SNLS233K LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer General Description Features The LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer is designed to equalize data transmitted over cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data rates from 125 Mbps to 2.97 Gbps and supports SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M. The LMH0344 implements DC restoration to correctly handle pathological data conditions. The equalizer may be driven in either a single ended or differential configuration. Additional features include separate carrier detect and output mute pins which may be tied together to mute the output when no signal is present. A programmable mute reference is provided to mute the output at a selectable level of signal degradation. For applications which use the RGB data patterns, the LMH0394 cable equalizer will provide better performance. The device is available in two space-saving packages: a 4 X 4 mm 16-pin LLP and even more space-efficient 3 x 3 mm 25-ball MICRO-ARRAY package. SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M compliant Supports DVB-ASI at 270 Mbps Wide range of data rates: 125 Mbps to 2.97 Gbps Equalizes up to 120 meters of Belden 1694A at 2.97 Gbps, up to 140 meters of Belden 1694A at 1.485 Gbps, or up to 400 meters of Belden 1694A at 270 Mbps Equalizes 0-120m of Belden 1694A at 2.97 Gbps with 0.3 UI maximum output jitter Manual bypass and output mute with a programmable threshold Single-ended or differential input 50 differential outputs (internal 50 pullups) Single 3.3V supply operation 280 mW typical power consumption 16-pin LLP or 25-ball MICRO-ARRAY package Industrial temperature range: -40C to +85C HBM ESD Rating: 8 kV LLP version footprint compatible with the LMH0044 and LMH0074 Replaces the Gennum GS2974A or GS2974B Applications SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital interfaces Serial digital data equalization and reception Data recovery equalization Typical Application 20199001 (c) 2011 National Semiconductor Corporation 201990 www.national.com LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer June 27, 2011 LMH0344 Absolute Maximum Ratings (Note 1) Supply Voltage Input Voltage (all inputs) Storage Temperature Range Junction Temperature Lead Temperature (Soldering 4 Sec) Package Thermal Resistance JA 16-pin LLP JC 16-pin LLP JA 25-ball MICRO-ARRAY ESD Rating (HBM) ESD Rating (MM) ESD Rating (CDM) Recommended Operating Conditions 4.0V -0.3V to VCC+0.3V -65C to +150C +125C Supply Voltage (VCC - VEE) Input Coupling Capacitance AEC Capacitor (Connected between AEC+ and AEC-) Operating Free Air Temperature (TA) +260C 3.3V 5% 1.0 F 1.0 F -40C to +85C +40C/W +4.5C/W +58.1C/W 8 kV 400V 2 kV DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 2, Note 3). Symbol Parameter VCMIN Input Common Mode Voltage VSDI Input Voltage Swing VCMOUT Output Common Mode Voltage VSDO Output Voltage Swing Conditions Reference Min SDI, SDI At LMH0344 input, (Note 4, Note 5) 720 100 load, differential MUTEREF MUTEREF Range CD Output Voltage Carrier not present CD 2.4 MUTE 2.0 800 Supply Current www.national.com 950 750 mVP-P 1.3 V 0.6 V V V V 85 2 mVP-P V Max to force outputs active ICC V 0.4 Min to mute outputs Units VCC - VSDO/2 Carrier present MUTE Input Voltage Max 1.9 SDO, SDO MUTEREF DC Voltage (floating) Typ 0.8 V 100 mA LMH0344 AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3). Symbol Parameter BRMIN Minimum Input Data Rate BRMax Maximum Input Data Rate Jitter for Various Cable Lengths Conditions Reference Min SDI, SDI Typ 270 Mbps, Belden 1694A, 0-400 meters (Note 6) 270 Mbps, Belden 1694A, 0-400 meters (Note 7) 0.2 UI UI 0.18 SDO, SDO UI UI 0.3 2.97 Gbps, Belden 1694A, 0-120 meters (Note 7) 20% - 80%, (Note 4) Mbps 0.08 2.97 Gbps, Belden 1694A, 0-120 meters (Note 6) Output Rise Time, Fall Time 2970 0.25 1.485 Gbps, Belden 1694A, 0-140 meters (Note 7) Units Mbps 0.07 1.485 Gbps, Belden 1694A, 0-140 meters (Note 6) tr,tf Max 125 UI UI 60 130 ps Mismatch in Rise/Fall Time (Note 4) 2 15 ps tOS Output Overshoot (Note 4) 1 5 % ROUT Output Resistance single-ended RLIN Input Return Loss 5 MHz - 1.5 GHz, (Note 8) 50 1.5 GHz - 3.0 GHz, (Note 8) SDI, SDI 15 dB 10 dB RIN Input Resistance single-ended 1.3 k CIN Input Capacitance single-ended 1 pF Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics" specifies acceptable device operating conditions. Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to VEE = 0 Volts. Note 3: Typical values are stated for VCC = +3.3V and TA = +25C. Note 4: Specification is guaranteed by characterization. Note 5: This specification is for 0m cable only. Note 6: Based on characterization data over the full range of recommended operating conditions of the device. Jitter is measured in accordance with SMPTE RP 184, SMPTE RP 192, and the applicable serial data transmission standard: SMPTE 424M, SMPTE 292M, or SMPTE 259M. Note 7: Measured with Pseudo Matrix Pathological test signal. Note 8: Input return loss is dependent on board design. The LMH0344 exceeds this specification on the SD344 evaluation board with a return loss network consisting of an 8.2 nH inductor in parallel with a 0.5 pF capacitor in parallel with the 75 series resistor on the input. Typical Performance Characteristics After Equalization: 120m of Belden 1694A with 2.97 Gbps PRBS After Equalization: 120m of Belden 1694A with 2.97 Gbps Pseudo Matrix Pathological 20199004 20199005 3 www.national.com LMH0344 Connection Diagrams 20199003 The exposed die attach pad is a negative electrical terminal for this device. It should be connected to the negative power supply voltage. 16-Pin LLP Order Number LMH0344SQ See NS Package Number SQB16A 20199006 25-Ball MICRO-ARRAY Order Number LMH0344GR See NS Package Number GRA25A www.national.com 4 LMH0344 Pin Descriptions LLP Pin MICROARRAY Ball Name Description 2 C1 SDI Serial data true input. 3 D1 SDI Serial data complement input. 5 E2 AEC+ AEC loop filter external capacitor (1F) positive connection. 6 E3 AEC- AEC loop filter external capacitor (1F) negative connection. 7 D3 BYPASS Bypasses equalization and DC restoration when high. No equalization occurs in this mode. 8 E4 MUTEREF Mute reference. Sets the threshold for CD and (with CD tied to MUTE) determines the maximum cable to be equalized before muting. MUTEREF may be either unconnected or connected to ground for maximum equalization. 10 D5 SDO Serial data complement output. 11 C5 SDO Serial data true output. 14 B3 MUTE Output mute. To disable the mute function and enable the output, MUTE must be tied to GND or a low level signal. To force the outputs to a muted state, tie to VCC. CD may be tied to this pin to inhibit the output when no input signal is present. MUTE has no function in BYPASS mode. 15 A2 CD Carrier detect. CD is high when no signal is present. CD has no function in BYPASS mode. 13, 16 A1, A3, A4, B2 VCC Positive power supply (+3.3V). DAP, 1, 4, 9, 12 B1, B4, D2, E5 VEE Negative power supply (ground). -- A5, B5, C2, NC C3, C4, D4, E1 No connect. 5 www.national.com LMH0344 Block Diagram 20199002 carrier detect is de-asserted and the outputs are muted is decreased. MUTEREF may be left unconnected or connected to ground for maximum equalization before muting. Device Operation BLOCK DESCRIPTION The Equalizer Filter block is a multi-stage adaptive filter. If Bypass is high, the equalizer filter is disabled. The DC Restoration / Level Control block receives the differential signals from the equalizer filter block. This block incorporates a self-biasing DC restoration circuit to fully DC restore the signals. If Bypass is high, this function is disabled. The signals before and after the DC Restoration / Level Control block are used to generate the Automatic Equalization Control (AEC) signal. This control signal sets the gain and bandwidth of the equalizer filter. The loop response in the AEC block is controlled by an external 1F capacitor placed across the AEC+ and AEC- pins. The Carrier Detect / Mute block generates the carrier detect signal and controls the mute function of the output. This block utilizes the CD and MUTE signals along with Mute Reference (MUTEREF). The Output Driver produces SDO and SDO. CARRIER DETECT (CD) AND MUTE Carrier detect CD indicates if a valid signal is present at the LMH0344 input. If MUTEREF is used, the carrier detect threshold will be altered accordingly. CD provides a high voltage when no signal is present at the LMH0344 input. CD is low when a valid input signal is detected. MUTE can be used to manually mute or enable SDO and SDO. Applying a high input to MUTE will mute the LMH0344 outputs by forcing the output to a logic zero. Applying a low input will force the outputs to be active. CD and MUTE may be tied together to automatically mute the output when no input signal is present. INPUT INTERFACING The LMH0344 accepts either differential or single-ended input. The input must be AC coupled. Transformer coupling is not supported. The LMH0344 correctly handles equalizer pathological signals for standard definition and high definition serial digital video, as described in SMPTE RP 178 and RP 198, respectively. MUTE REFERENCE (MUTEREF) The mute reference sets the threshold for CD and (with CD tied to MUTE) determines the amount of cable to equalize before automatically muting the outputs. This is set by applying a voltage inversely proportional to the length of cable to equalize. The applied voltage must be greater than the MUTEREF floating voltage (typically 1.3V) in order to change the CD threshold. As the applied MUTEREF voltage is increased, the amount of cable that can be equalized before www.national.com OUTPUT INTERFACING The SDO and SDO outputs are internally loaded with 50. They produce a 750 mVP-P differential output, or a 375 mVP-P single-ended output. 6 LMH0344 Physical Dimensions inches (millimeters) unless otherwise noted 16-Pin LLP Order Number LMH0344SQ NS Package Number SQB16A 25-Ball MICRO-ARRAY Order Number LMH0344GR NS Package Number GRA25A 7 www.national.com LMH0344 3 Gbps HD/SD SDI Adaptive Cable Equalizer Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: www.national.com Products Design Support Amplifiers www.national.com/amplifiers WEBENCH(R) Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage References www.national.com/vref Design Made Easy www.national.com/easy www.national.com/powerwise Applications & Markets www.national.com/solutions Mil/Aero www.national.com/milaero PowerWise(R) Solutions Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors SolarMagicTM www.national.com/solarmagic PLL/VCO www.national.com/wireless www.national.com/training PowerWise(R) Design University THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION ("NATIONAL") PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL'S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright(c) 2011 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated