SIP PC Board &
Rail/Panel Mount
Solid State Relays
Tyco Electronics I SIP PC Board & Rail/Panel
Mount Solid State Relays
DESCRIPTION
KEY FEATURES
Quiet operation
Long service life
Optical coupling provides
2500 to 4000V isolation
(model dependent)
Inverse parallel connected
SCR output in all types
Low leakage current
Integral heatsinks on
some models
Maximum ratings from 2A to
25A for SIP PC board relays
Maximum ratings from 10A
to 65A for DIN rail/panel
mount relays
Solid state relays in various SIP PC board packages or DIN-rail/panel
mount packages
Maximum current ratings from 2A to 25A for PC board models and
from 10A to 65A for rail/panel mount types.
APPLICATIONS
Properly applied, these solid state relays deliver the long service life
demanded by a variety of applications where loads are frequently
cycled on and off.
The control of heating elements, motors and lamps in industrial machin-
ery and commercial equipment are typical applications.
Theatrical lighting systems, traffic controls and institutional door con-
trols also benefit from the switching characteristics of these solid state
relays.
Medical applications such as blood analysis equipment, portable vital
signs monitors, lasers, scanners and baby warmers may also require
switching characteristics such as those demonstrated by SIP PC board
mount solid state relays.
The quiet operation of these solid state relays makes them desirable in
applications wherever audible noise must be kept to a minimum.
Models are available in both zero voltage turn-on and random voltage
turn-on versions, permitting users to select the relay with the preferred
switching characteristics for a given application.
MECHANICAL
STANDARDS AND SPECS
SSRC series solid state relays are UL Recognized for the US and
Canada, UL File E81606
SSRA, SSRF and SSRM series solid state relays are UL Recognized for
the US and Canada, UL File E29244
SSRK series solid state relays are UL Recognized for the US, UL File
E29244, and CSA Certified for Canada, CSA File LR246041.
PC board models SSRA, SSRC and SSRF are in a SIP configuration with
terminals on 0.1 in (2.54 mm) spacing.
DIN rail / panel mount models SSRK and SSRM can either snap onto a
35mm DIN rail or they may be mounted directly to a panel with screws.
Finger-safe (IP20) screw clamps are provided for load and control con-
nections, and a #10 screw is provided for ground termination.