1.1 EPIC(R) H - A Einsatze / Inserts / Inserts 1 Technische Daten: * Kontaktzahlen: . . . . . . . . . .3, 4, 10, 16, 32, 48 (+ PE) Caracteristiques techniques: * Nombre de contacts: . . . . .3, 4, 10, 16, 32, 48 (+ PE) * Bemessungsspannung: . . . VDE: 400 V EPIC(R) H-A 3/4 250 V EPIC(R) H-A 10-48 UL: 600 V EPIC(R) H-A 3-48 CSA: 600 V EPIC(R) H-A 3-48 * Tension nominale: . . . . . . .VDE: 400 V EPIC(R) H-A 3/4 250 V EPIC(R) H-A 10-48 UL: 600 V EPIC(R) H-A 3-48 CSA: 600 V EPIC(R) H-A 3-48 * Bemessungsstrom: . . . . . .VDE: 10 A EPIC(R) H-A 3/4 16 A EPIC(R) H-A 10-48 UL: 10 A EPIC(R) H-A 3/4 14 A EPIC(R) H-A 10-48 CSA: 10 A EPIC(R) H-A 3/4 16 A EPIC(R) H-A 10-48 * Courant nominale: . . . . . . . VDE: 10 A EPIC(R) H-A 3/4 16 A EPIC(R) H-A 10-48 UL: 10 A EPIC(R) H-A 3/4 14 A EPIC(R) H-A 10-48 CSA: 10 A EPIC(R) H-A 3/4 16 A EPIC(R) H-A 10-48 * Verschmutzungsgrad: . . . . 3; entsprechend DIN EN 61984 Pkt. 6.19.2.2 muss mindestens ein Schutzgrad von IP 54 eingehalten werden * Bemessungsstospannung: 4 kV * Degre de pollution: . . . . . . .3; selon DIN EN 61984/6.19.2.2 le degre de protection d'aux moins IP 54 doit etre respecter * Dimensionnement de choc: 4 kV 2 * Leitungsanschluss: . . . . . .Schraubanschluss: 0,5 - 2,5 mm ................................. (2,5 mm2 nur ohne Adernendhulse) * Temperaturbereich: . . . . . . -40 C bis +100 C, kurzzeitig bis +125 C * Kontakte: . . . . . . . . . . . . . .Kupferlegierung, hartversilbert * Durchgangswiderstand: . . . 1,5 - 4 mOhm * Steckzyklen: . . . . . . . . . . . .100 (je nach Anwendungsfall hohere Steckzyklen moglich) Technical Data: * Number of contacts: . . . . . . . .3, 4, 10, 16, 32, 48 (+ PE) * Rated voltage: . . . . . . . . . . . . .VDE: 400 V EPIC(R) H-A 3/4 250 V EPIC(R) H-A 10-48 UL: 600 V EPIC(R) H-A 3-48 CSA: 600 V EPIC(R) H-A 3-48 * Rated current: . . . . . . . . . . . .VDE: 10 A EPIC(R) H-A 3/4 16 A EPIC(R) H-A 10-48 UL: 10 A EPIC(R) H-A 3/4 14 A EPIC(R) H-A 10-48 CSA: 10 A EPIC(R) H-A 3/4 16 A EPIC(R) H-A 10-48 * Pollution degree: . . . . . . . . . .3; corresponding to DIN EN 61984/ 6.19.2.2 the protection class IP 54 must be restrained * Dimensioning transient: . . . . . 4 kV * Termination technique: . . . . . .Screw termination: 0,5 - 2,5 mm2 ..................................... (2,5 mm2 only without end sleeve) * Temperature range: . . . . . . . .-40 C - +100 C, for a short term up to +125 C * Contacts: . . . . . . . . . . . . . . . . .Copper alloy, silver plated * Contact resistance: . . . . . . . . .1,5 - 4 mOhm * Mating cycles: . . . . . . . . . . . .100 (higher mating-cycles depends on the application) 76 * Raccordement: . . . . . . . . . Raccord a visser: 0,5 - 2,5 mm2 ................................. (2,5 mm2 seulement sans Cosse) * Gamme de temperature: . .-40 C - +100 C, a court terme jusqu'a +125 C * Contacts: . . . . . . . . . . . . . .Alliage cuivre, argente * Resistance de passage: . . . 1,5 - 4 mOhm * Cycles d'insertion: . . . . . . . 100 (selon le cas cycles d'insertion plus important) 1.1 EPIC(R) H - A Belastungsstrom [ A ] Working current [ A ] Intensite de service [ A ] Einsatze / Inserts / Inserts 1 Belastungsstrom [ A ] Working current [ A ] Intensite de service [ A ] Umgebungstemperatur [ C ] Ambient Temperature [ C ] Temperature ambiante [ C ] Umgebungstemperatur [ C ] Ambient Temperature [ C ] Temperature ambiante [ C ] Anschlussmoglichkeiten bei H - A Einsatzen Termination possibilities with H- A inserts Raccordement pour inserts H - A Einsatze Inserts Inserts H-A 3 H-A 4 Anschlussquerschnitt in mm2 Wire cross section in mm2 coupe transversale de raccordement mm2 eindrahtig massiv Litze ohne AE single-wire solid strand without wire end ferrule Brin massif Tresse sans cas final de veine 0,5 - 2,5 kein Anschluss no connection ne pas de raccordement 0,5 - 2,5 kein Anschluss no connection ne pas de raccordement 0,5 - 1,5 0,75 - 2,5 H-A 10 mit Drahtschutz with wire protection avec protection de fil H-A 10 0,5 - 1,5 ohne Drahtschutz without wire protection ne pas de protection de fil H-A 16 0,5 - 1,5 mit Drahtschutz with wire protection avec protection de fil H-A 16 0,5 - 1,5 ohne Drahtschutz without wire protection ne pas de protection de fil Litze mit kurzer AE ohne Isolierung strand with short wire end ferrule and without isolation Tresse avec cas final de veine sans isolation 0,5 - 2,5 0,5 - 2,5 0,5 - 1,5 Litze mit AE und Isolierung strand with wire end ferrule and with isolation Tresse avec cas final de veine et avec isolation kein Anschluss no connection ne pas de raccordement kein Anschluss no connection ne pas de raccordement 0,5 - 1,5 kein Anschluss 0,5 - 1,5 no connection ne pas de raccordement kein Anschluss no connection ne pas de raccordement 0,75 - 2,5 0,5 - 1,5 0,5 - 1,5 kein Anschluss 0,5 - 1,5 no connection ne pas de raccordement 0,5 - 1,5 77 1.1 EPIC(R) H - A Einsatze / Inserts / Inserts M 1 F H-A 3 Artikel part article Version version version Art.Nr. part No. N art. H-A 3 SS Stift / male / male 10420000 3 H-A 3 BS Buchse / female / femelle 10421000 3 Gehause / Housings / Boitiers: 3.1: H-A 3 Drahtschutz wire protection protection de fil Kontakte contacts contacts Ansicht anschlussseitig View from cable side Vue cote raccordement M F H-A 4 Artikel part article Version version version Art.Nr. part No. N art. H-A 4 SS Stift / male / male 10431000 4 H-A 4 BS Buchse / female / femelle 10432000 4 Gehause / Housings / Boitiers: 3.1: H-A 3 78 Drahtschutz wire protection protection de fil Kontakte contacts contacts Ansicht anschlussseitig View from cable side Vue cote raccordement