D.C. geared motors High quality, all-metal integral-type gearboxes Basic speed range : 7.3 to 616 rpm Torque rating : 5 Nm, for long life Motors : maximum usable power 9 to 33 W Types Applications 80 815 0 80 815 0 80 815 0 12 V 24 V 48 V 2600 2600 2600 Nominal voltage - Motor-driven blinds and shutters Opening and closing doors Photocopiers : staplers, collators Equipment for medical rehabilitation - X-ray equipment - Agro-foodstuffs industry - Motorised point-of-sale displays Standard motor speed (rpm) Output speeds (rpm) 2600 616 385 339.5 212 170 106 68 53 42.5 21 10.5 Ratios (i) 1800 426 266 235 147 118 73 47 37 29.4 14.7 7.4 Part numbers 4.22 6.75 7.66 12.25 15.31 24.5 38.28 49 61.25 122.5 245 Standard gearbox shaft : see dimensions General characteristics 1 Made to order products, available on request Motor : - other supply voltages - shaft lengths at front and/or rear - integrated interference suppression 82 830 - encoders - other front and rear fixing plates - "high power" motors Gearboxes : - special shaft - special lubrication - other reduction ratios Motor Gearbox Maximum permitted torque on gearbox for continuous rating Axial load (dynamic) Radial load (dynamic) Maximum usable power Nominal usable power Gearbox case temperature rise Weight 82 810 0 81 035 0 82 810 0 81 035 0 82 810 0 81 035 0 N.m 5 5 5 daN daN W W C g 6 6 10.3 9.4 45 820 6 6 9.5 8.7 46 820 6 6 9 8.2 45 820 Options : for standard products non stocked Output shaft O 8 mm 79 290 064 Ball bearings on gearbox output shaft (81 035 5) Nominal speed and torque curves mN.m The shaded zone represents the operating range of the geared motor. The horizontal line marks the maximum torque available in continuous duty cycle for a given life. For higher torque ratings, service life will be reduced. 5000 1000 100 1 2 5 10 Other information For basic principles see pages 1/7. 1/32 rpm 100 500 24 V 48 V 12 V 24 V 48 V 2600 2600 2600 1800 1800 1800 Dimensions 2 80 815 0 - 80 805 0 3 4 fixing holes O 4.2 13 4 80 835 012 80 835 009 56 80 835 013 80 835 004 65,1 max. 80 835 002 80 835 003 80 835 014 80 835 015 80 835 008 80 835 006 80 835 005 80 835 016 80 835 017 80 835 018 82 800 0 81 035 0 82 800 0 81 035 0 82 800 0 81 035 0 82 830 0 81 035 0 82 830 0 81 035 0 82 830 0 81 035 0 5 5 5 5 5 5 6 6 16.3 15.7 44 920 6 6 17 15.6 40 920 6 6 16.7 15 45 920 6 6 33 27 50 1540 6 6 33 27 50 1540 6 6 33 27 50 1540 6,9 15 14,3 50,5 22,7 max. (shaft pushed-in ) Types 80 815 0 80 805 0 22,7 max. (shaft pushed-in ) 3,5 Lead length 200 mm mN.m 1000 1000 Non stocked product : gearbox shaft 79 290 064 (shaft pushed-in ) 73,5 max. rpm 100 500 100 1 2 5 10 rpm 100 O 160,05 5000 0 5000 O 8-0,022 mN.m 500 To order, specify : Standard products 4 Part number Example : D. C. geared motor - 80 835 012 Standard products, non stocked 1 2 3 4 Type Nominal voltage Output speed Standard speed Example : D. C. geared motor 80 815 0 - 12 V - 2600 rpm - 170 rpm - output shaft 79 290 064 1/33 5 Option 0 0,05 56 17,5 65,1 13 142,5 max. 56 65,1 max. 16 O 8 - 0,022 15 4 fixing holes O 4.2 7 across flat L max (mm) 113.5 128.5 80 835 0 5 3,5 L max. 100 1 2 5 10 2 tags IEC 760 series 4.8 x 0.5 0 12 V 1 O 160,05 80 835 0 7 across flat 80 835 0 O 8-0,022 80 835 0 56 80 805 0 65,1 max. 80 805 0 17,5 80 805 0 1