High Voltage Ceramic Capacitors HR/HS Types - Type II FEATURES APPLICATIONS * Disc capacitor, type II * Two available versions: - HR: Molded type with connections - HS: Uncoated type without connections (silvered ceramic) * DC high voltage applications REFERENCES - VOLTAGE AND CAPACITANCE RANGE Torque S (m.daN) Weight (g) 27 (1.063) 25 (0.984) 37 (1.457) 23 (0.906) 8 (0.315) 5 (0.197) 9 (0.354) 7 (0.276) 0.3 32 34 (1.339) 32 (1.260) 40 (1.575) 28 (1.100) 8 (0.315) 5 (0.197) 9 (0.354) 7 (0.276) 0.3 45 24 39 (1.535) 37 (1.457) 37 (1.457) 23 (0.906) 8 (0.315) 5 (0.197) 9 (0.354) 7 (0.276) 0.3 65 30 44 (1.732) 42 (1.654) 40 (1.575) 28 (1.100) 8 (0.315) 5 (0.197) 9 (0.354) 7 (0.276) 0.3 90 VR VE (kVC~) (kVC~) Reference CR (pF) D1 HR 30 0X 0471S-- 470 16 24 o HR 30 0Y 0471S-- 470 20 30 HR 40 0X 0102S-- 1000 16 HR 40 0Y 0102S-- 1000 20 Dimensions millimeters (inches) D D1 L h d p e p h L 2 (.079) Style HR 60 0Y 0222S-- 2200 20 30 54 (2.126) 52 (2.047) 47 (1.850) 28 (1.100) 12 (0.472) 8 (0.315) 13 (0.512) 10 (0.394) 1 180 HR 60 0X 0502S-- 5000 16 24 55 (2.165) 54 (2.126) 40 (1.575) 21 (0.827) 12 (0.472) 8 (0.315) 13 (0.512) 10 (0.394) 1 180 e D d (ISO) Important: HR type In order to improve capacitor mounting, connections ends are designed with two flats. Thus, tightening torque is only applied on the screw (consult chart above for torque "S" value). D 2 (.079) h 2 (.079) HS 30 0X 0471S-- 470 16 24 17 (0.669) -- Hardware supplied for capacitor mounting 2 x screws TCB M5 L8 according or TCB M8 L12 to O 2 x washers -- 13 (0.512) HS 30 0Y 0471S-- 470 20 30 19 (0.748) -- -- 17 (0.669) HS 40 0X 0102S-- 1000 16 24 26 (1.024) -- -- 14 (0.551) HS 40 0Y 0102S-- 1000 20 30 29 (1.142) -- -- 16 (0.630) HS 60 0Y 0222S-- 2200 20 30 37 (1.457) -- -- 14 (0.551) HS 60 0X 0502S-- 5000 16 24 42 (1.654) -- -- 8 (0.315) Handling of uncoated types must be done under strict cleanliness conditions. SPECIAL TYPES MARKING Upon request: - Metallized uncoated ceramic disc with connections - Stacks with coated or uncoated units from standard ceramic disc - Reference (HTX) - Capacitance - Rated voltage ELECTRICAL CHARACTERISTICS * Operating temperature range * Rated voltage (Vrms /50 Hz) * Test voltage (Vrms /50 Hz) * Capacitance range (F = 1 kHz /T = 25C / Um = 1 Vrms) * Capacitance tolerance on rated capacitance * Dissipation factor * Insulation resistance (Um = 1000 V / 1 mn) * Self-inductance * Main parameters change vs applied voltage, temperature 18 -55 +85C (+125C: consult us) 16 kV or 20 kV 24 kV or 30 kV TYPICAL CURVES Capacitance change vs temperature AEC (%) C AEC (%) C 470 to 5000pF +10 +20 0 0 -20 +50% (S) tg d 200.10-4 Ri 10 G 1/2 L 0.03 H See typical curves Capacitance change vs applied voltage -10 -20 -20 -40 -30 -60 -80 -55 +20 C +10 C -40 -35 TPC -15 5 25 45 65 85 Temperature ( C) 0 25 50 75 100 Applied Voltage (% VR DC) High Voltage Ceramic Capacitors How To Order ORDERING CODE HP40 E 3 Type/Size High Voltage Radial-leaded Discs 09 12 HZ 16 20 22 Coated Discs HT 30 HD 40 HR 60 Class Type I A = P 100 C = NP0 H = N33 T = N470 U = N750 V = N1500 Voltage 1000 V: L 1600 V: M 2000 V: N 2500 V: P 3000 V: Q 4000 V: R 5000 V: S 6000/6300 V: T 8000/9000 V: U 10,000 V: V 12,500 V: W 15/16 kV: X 20/25 kV: Y 30 kV: 3 40 kV: 4 50 kV: 5 Type II E = N4700 N = N10000 W = +22 -56% X = +22 -82% 30 40 50 60 Uncoated Discs HU 30 HE 40 HS 60 Rods 30 HB 40 HF 60 HP 0102 For the following types whose class or voltage is not specified but inferred by the type, the size and the value: write 0 (zero) in the 5th (class) or 6th digit case (voltage). Class not specified HD HE HR HS HB HF Voltage not specified HT HU HB HF Capacitance (EIA code) Capacitance expressed by 2 significant figures 1st digit: 0 (zero) 2nd and 3rd digits: the 2 significant figures of the capacitance value. 4th digit: - for values 10pF and 990F: the number of ZEROS to be added to the capacitance values - for values 1pF and 9.9pF: the figure 9 signifying that the capacitance value is to be multiplied by 0.1 Examples: 1000pF: 0102 8.2pF: 0829 Capacitance expressed by 3 significant figures 1st, 2nd and 3rd digits: the 3 significant figures of the capacitance value. 4th digit: - for values > 100pF and 999 F: the number of ZEROS to be added to the capacitance value - for values > 10pF and < 100pF: the figure 9 signifying that the capacitance value is to be multiplied by 0.01. - for values > 1pF and 10pF: the figure 8 signifying that the capacitance value is to be multiplied by 0.01. Examples: 196pF: 1960 47.2pF: 4729 8.28pF: 8288 NOTE: Special drawing number If customer requirements differ from the standard type, the codification of the product is modified as follows: 5th, 6th digit: - 7th digit: H for high voltage types 8th, 9th, 10th digit: drawing number 11th digit: - 12th, 13th digit: two digits number for revised edition number 8 TPC M ---- Tolerance C < 10pF Code 1pF F 2pF G C 10pF Code 5% 10% 20% -20 +50% -20 +80% J K M S Z Suffix -PY WH High Voltage Ceramic Capacitors Marking - Packaging - Identification MARKING IDENTIFICATION - TRACEABILITY Each part is marked with the following indications: - Logo - Reference - Rated capacitance (EIA code) - Tolerance on capacitance (EIA code) - Rated voltage On the packaging of all shipped capacitors, you will find a bar code label (code 39). This label gives systematic information on the type of product, part number, lot number, packing date and quantity. An example is given below: Packaging date (YYMMDD) Lot number Quantity of parts per packaging Product and part number reference This information allows traceability of the entire manufacturing process, from critical raw materials to shipment. This is extremely useful for any information request, customer complaint or product return. CROSS REFERENCES PREVIOUS REFERENCES / NEW REFERENCES High Voltage Previous Reference New Reference HT030 ... 060 HT30 ... 60 HT030D ... 060D HTD230 ... 360 HTD230D ... 360D HU30 ... 60 HD30 ... 60 HE30 ... 60 HTX230 ... 360 HR30 ... 60 HTX230D ... 360D HS30 ... 60 HTZ130 ... 160 HTZ131 ... 161 HB30 ... 60 HF30 ... 60 22 TPC