1 Dimming/Connector Type CXA-L0612A-VJR Features Applications 1 output Applicable panel size*: 3 to 15 inches With brightness control function (A current system). In the high-voltage generator(a terminal and a pattern), an anti-dust measure by silicone application is taken. (Notice) Applicable panel size becomes a standard. CXA-L0612A-VJR SpecificationsPlease refer to each specification before use Electrical Characteristics Item Unit Output Current mArms Input Current A Frequency kHz Open Circuit Voltage Vrms Symbol Iout (Maximum dimmer) Iout (Minimum dimmer) Iin Freq Vopen min 5.4 5.3 Specification typ 6.0 6.0 max 6.6 6.7 Vin(V) 12 2.4 12 2.4 Vrmt(V) 5 5 Condition Vbr(V) 0 0 Ta( ) 23 5 0 to +70 RL(k) 100 90 to 130 Remark (*1) (*1) 1.3 1.6 1.9 12 2.4 5 4 23 5 520 (*1) 48 1500 0.40 58 1800 0.65 68 - 12 12 2.4 9.6min. 5 5 5 0 0 0 to 3 0 to +70 0 to +70 0 to +70 90 to 130 90 to 130 Open load (*1) Please refer to the connection diagram for details of a dimming method. Other Specifications Dimming Function Operating Temperature Storage Temperature Operating Humidity Ratio Safety Standard Weight Dimensions(WxDxH) Fused Input Remote ON OFF Alarm Signal Function Shutdown Function RH% g mm Yes 0 to +70 -30 to +85 95Max 13.7 95.5x20x8 (*2) Yes Yes No No Silicone Coating on High Voltage Area Conformity to RoHs Directive This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Yes (*2) These dimensions are indicated the maximum. All specifications are subject to change without notice. 001-01/20080228/etl_cxa_l0612a_vjr 2 CXA-L0612A-VJR Outline Drawing Example of label marking Product name, Lot No., Country of origin, TDK-Lambda logotype Silicone max. max. max. max. High-voltage generator (The entire surface within a range of 45mm away from the end of the basein) From high-voltage generator, please secure space distance more than 3mm in top and bottom right and left. unit:mm Connector Connector number Part number Model Quantity Remarks Printed circuit board PCB CompositeCEM-3 1 UL94V-0 t=1.0 Input connector CN1 53261-0571 1 Molex Inc. 51021-0500 Output connector CN2 SM028.0B-BHS-1-TBLF SN 1 JST Mfg. Co., Ltd. BHR-03VS-1 Recommended applicable connector Terminal Numbers And Functions Input side CN1 Output side CN2 Terminal number Symbol Rated voltage Remarks Terminal number Symbol Rated voltage CN1-1 Vin 12 2.4V Power input CN2-1 VLOW 2V CN1-2 GND 0V Ground CN2-2 N.C. CN2-3 VHIGH 600Vrms CN1-3 Vrmt CN1-4 Vbr CN1-5 N.C. 0 to 0.4VOFF 0V/2.5V to Vin Remote terminal 2.5V to Vin ON 0 to 4V Dimmer terminal Because it uses for internal circuit, please be not connected. All specifications are subject to change without notice. 3 CXA-L0612A-VJR Connections Maximum brightness RLLoad resistance7W minimum Operate as follows by switching a SW. SW Unit operation a Operation b Operation stopping All specifications are subject to change without notice.