32 Drawings are actual size. RG-11/U TYPE CABLE CONNECTORS Se Ade G7 AT wee ne sone ete ye abe _ lle DATAGRADE RG-11 PartNumber = Crimp Ring |.D. Pin Finish 44344 460 Gold 75777 .460 Tin 51770 .480 Gold ACCEPTS 48400 .480 Tin CTR. COND Pin diameter of .032 optimized for data applications * Suitable for use where "FD" P550 type connectors are recommended Bright alloy finish on nut 48-32 THD ACCEPTS See Appendix, Figure 14, for cabie trim dimensiong, yex Use G-CRT-211 crimp tool GF-11-AHS TYPE GF-11-AHS/460 GF-11-AHS/460-HD GF- 11-AHS/480 GF-11-AHS/480-HD * Crimp-on center pin of .030 prevents potential damage to F female Attached crimp ring provides excellent electrical shielding and mechanical retention All brass construction features annealed crimp ring for consistent reliable crimp * Bright acid tin plating on body and center pin HD suffix required with solid polyethylene dielectric 716 HEX ACCEPTS RG-11/U cable with .045 @ center conductor 978-32 THD DIELECTRIC * See Appendix, Figure 14, for cable trim dimensions * Use G-CRT-211 crimp tool GAF-11-AHS TYPE GAF-11-AHS/460 GAF-11-AHS/480 ACCEPTS * Same features as above with the addition of integral CTR. COND. DIELECTRIC prevents potential damage to F female ACCEPTS 064 CTR COND. 032 ] lump 75 aa 526 a center conductor socket * Connector center conductor of .025 diameter . | | | 520 | * See Appendix, Figure 15, for cable trim dimensions e Use G-CRT-211 crimp tool G-11-B-AHS TYPE G-11-B-AHS/460 G-11-B-AHS/460-S G- 11-B-AHS/480 G-11-B-AHS/480-S 58-24 THD [ ORING 5/8"-24 threaded body for adapting RG-11/U a4 HEX type cable to "KS" entry port on equipment OELECTRIC. * -S style has rotating KS threads to allow installation and removal with cable attached cr Cs * Feed-thru design allows center conductor she of cable to be seized in equipment | 44 Attached 5/8" crimp ring provides excellent electrical shielding and mechanical retention Le * Bright acid tin plating a tas See Appendix, Figure 20, for cable trim dimensions , e Use G-CRT-211 crimp tool ACCEPTS 280 DIELECTRIC GILBERT ENGINEERING CO., INC. A POST OFFICE BOX 23189 5310 W. CAMELBACK ROAD TEL: 602-245-1050 FAX: 602-931-0684 & PHOENIX. AZ 85063-3189 USA GLENDALE. AZ 85301-7597 USA TEL: 800-528-5567 FAX; 800-344-6358