PL-900RG-S SERIES
Plated Plasc Shell Auto-Coupling Connectors 52 pole capacity disposable receptacle and support interconnects
STANDARD PART NUMBERS
TABLE B:
Note: Part numbers cover black couplers in Key 1 configuration. For other color and housing options utilize the Amphenol Alden connector configurator located at www.amphenolalden.com/configurator
CONTACT TERMINATION OPTIONS
Panel-Mount, Cut-Out Template
0.88φ
0.78
1.05 φ mounng
Flange Footprint
Applies to Rear Panel-Mount
Receptacles
Features & Benefits
Available in most pole counts
from 9 to 52 Poles
PCB stand-offs ensure proper
positioning
Convenient packaging high
temperature contect cures may
be soldered to PCB and snapped
into panel-mounted receptacle
housing later
Request Sales Drawing for PCB
mounting template
PCB (Panel-Mount Receptacles only)
Tiered solder cups
provide easy access to
center positions. Canted
cups facilitate quick and
easy wire positioning.
Standard on 9-52 pole
configurations
Features & Benefits
Assembly Instructions:
AI-PL900RGS-01 (9-52, 22&26AWG)
ASSEMBLY INSTRUCTIONS
2.25
TABLE C:
Dimension A Part Number
0.140 107307-01
0.166 107307-08
0.180 107307-15
0.210 107307-22
0.260 107307-29
Disposable Receptacle Backshell
A
(Wire exit i.d.)
ACCESSORIES
Panel-Mount Receptacle Dust Cover
(Nylon Tether locks into panel washer)
P/N 111179-01
Plug Soaking Cap
(Wire Tether with cable loop)
Cable Mount Receptacle Dust Cover
(Wire Tether with cable loop)
P/N 110401-01
Receptacle Dust Cover:
The PL-900 Series receptacle dust
cover protects the receptacles contact
system from dust, moisture, and
mechanical stress when the connector
pair is disengaged. When secured the
dust cover will provide an IP-67
environmental seal. The cover is
equipped with a tether for security.
Plug Soaking Cap:
The PL-900 Series Plug Soaking Cap is
designed to protect the plug’s contact
system when a cable assembly is being
cleaned or not in use. The soaking cap
locks onto the plug providing an IP-67 seal
that is ideal for soaking lin liquid
disinfectants. The soaking cap can be
permanently attached to a a cable assembly
by means of a light weight tether.
P/N 111026-01
Note: recommended tooling included in assembly instructions
Plug Backshell
Dimension A Part Number
0.354 109353-01
0.420 109353
For additional information about this, or any other Amphenol Alden product, please contact
an Amphenol Alden specialist today, www.AmphenolAlden.com
Phone: 1(508) 427-7000
E-mail: Info@AmphenolAlden.com
www.AmphenolAlden.com 2
2.0
A
(Wire exit i.d.)
Number of Poles Rear Panel-Mount Receptacle Cable Mount Plug
Solder Cup PCB Solder Cup
52 343765 343769 343823
41 343757 343761 343819
35 343749 343753 343815
28 343741 343745 343811
24 (26AWG) 343773 343777 343807
24 (22AWG) 343733 343737 343803
17 343725 343729 343799
15 343717 343721 343795
11 343709 343713 373791
9 343701 343705 343787
Options Include:
Indicator Color Options White (std.) & Red
Mating Key Options 2 Standard Keys, Proprietary Keys Available
Panel-Mount Thickness Options .125 (std.), .063, .187,.250
Note: Black (std.) Gray (optional) & accessories sold separately