ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 01.25.2019
GPS L1 + L5 Stacked Patch Antenna
Pb
25.0 x 25.0 x 7.5 mm
RoHS/RoHS II Compliant
MSL = 1
APAKM2507S-SGL5
Features Applications
Electrical Characteristics
Parameters L1 L5 Units
Min Typical Max Min Typical Max
Operating Frequency 1575.42 ± 1.023 1176.45 ± 1.023 MHz
Return Loss -20 -20 dB
Gain 4.0 -3.0 dBi
Polarization Model RHCP RHCP
Impedance 50 50 Ω
Frequency Temperature
Coefcient 20 20 ppm/°C
Note:
• Ground plane size: 70 x 70 mm
• Application environment, including size of the ground plane, proximity to adjacent components, etc., will affect stated
performance. Antenna ne tuning might be essential to optimize the end solution performance. Please contact Abracon sales team
for optimization services.
• Dual stacked patch for GPS L1 and L5
• Low VSWR
• RHCP polarization
• Gain of 4.0 dBi (L1), -3.0 dBi (L5)
•GPS L1 and L5 applications
•IoT
•M2M
•Remote technology monitoring
•Geofencing
•Navigation
•Surveying and mapping systems
•Logistics
•Precision transportation
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 01.25.2019
GPS L1 + L5 Stacked Patch Antenna
Pb
25.0 x 25.0 x 7.5 mm
RoHS/RoHS II Compliant
MSL = 1
APAKM2507S-SGL5
Outline Drawing and Dimensions (Unit: mm)
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 01.25.2019
GPS L1 + L5 Stacked Patch Antenna
Pb
25.0 x 25.0 x 7.5 mm
RoHS/RoHS II Compliant
MSL = 1
APAKM2507S-SGL5
Impedance Characteristic
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 01.25.2019
GPS L1 + L5 Stacked Patch Antenna
Pb
25.0 x 25.0 x 7.5 mm
RoHS/RoHS II Compliant
MSL = 1
APAKM2507S-SGL5
Gain
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 01.25.2019
GPS L1 + L5 Stacked Patch Antenna
Pb
25.0 x 25.0 x 7.5 mm
RoHS/RoHS II Compliant
MSL = 1
APAKM2507S-SGL5
Reliability Tests
Item Test Condition Remark
Humidity Test
The device is subjected to 90~95% relative humidity 60 °C ± 3
°C for 96 hours, then dry out at 25°C ± 5°C and less than 65%
relative humidity for 2~4 hours. After dry out the device shall
satisfy the table.1 specication.
It shall fulll the table.1 specications.
High Temperature
Exposure
The device shall satisfy the table.1 specication after leaving at
105°C for 96 hours, provided it would be measured after 2~4
hours leaving in 25°C ± 5°C and less than 65% relative humidity.
It shall fulll the table.1 specications.
Low Temperature
Exposure
The device shall satisfy the table.1 specication after leaving
at -40°C for 96 hours, provided it would be measured after 2~4
hours leaving in 25°C ±5°C and less than 65% relative humidity.
It shall fulll the table.1 specications.
Temperature
Cycle
Subject the device to -40°C for 30 min. followed by a high
temperature of 105°C for 30 min cycling shall be repeated
5 times. At the room temperature for 1 hour prior to the
measurement.
It shall fulll the table.1 specications.
Vibration
Subject the device to vibration for 2 hours each in x, y and z
axis with the amplitude of 1.5 mm, the frequency shall be varied
uniformly between the limits of 10~55 Hz.
It shall fulll the table.1 specications.
Soldering Test
Lead terminals are heated up to 350°C ± 10°C for 5±0.5 s with
brand iron and then element shall be measured after being placed
in natural conditions for 1 hour. No visible damage and it shall
fulll the table specications in 1.0.
It shall fulll the table.1 specications.
Solderability
Lead terminals are immersed in soldering bath of 260°C ~ 290°C
for 3±0.5 s. More than 95% of the terminal surface of the device
shall be covered with fresh solder.
The terminals shall be at least 95%
covered by solder.
Terminal Pressure
Strength
Force of 2 kg is applied to each lead in axial direction for
10±1 s (see drawing). No visible damage and it shall fulll the
specications in Fig.1.
Mechanical damage such as breaks shall
not occur.
Item Post Environmental Tolerance Unit
Center Frequency Change ±2.0 MHz
Fig. 1
Table 1
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 01.25.2019
GPS L1 + L5 Stacked Patch Antenna
Pb
25.0 x 25.0 x 7.5 mm
RoHS/RoHS II Compliant
MSL = 1
APAKM2507S-SGL5
Packaging
The carton of dimension 365.0 x 356.0 x 160.0 mm encloses 800 pieces and weighs 14 Kg.
Per package base 50 elements
Per vacuum bag 4 package bases
Per inner box 1 vacuum bag
Per package 4 inner boxes
ATTENTION: Abracon LLC’s products are COTS – Commercial-O-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
