MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life for5 to8 product, 105 New! LE Series Suitable for long life and high reliability products Downsize and long life Endurance with ripple current10,000 hours at 105 Case size range5x11L to 8x11.5L Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS Compliant SPECIFICATION Items Characteristics Category Temperature Range -25 to +105 10 to 100Vdc 20% (M) I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) 10V 16V 25V 35V 50V 63V 100V Rated voltage (Vdc) tan(Max.) 0.45 0.35 0.30 0.22 0.19 0.17 0.15 10V 16V 25V 35V 50V 63V 100V Rated voltage (Vdc) Z(-25)/Z(20) 8 6 4 4 3 3 3 Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan) Low Temperature Characteristics (Max. Impedance Ratio) (at 20, 120Hz) (at 20 after 2 minutes) (at 20,120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105. Capacitance change 25 of the initial value 300 of the initial specified value D.F. (tan) Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 25% of the initial value D.F. (tan) 300% of the initial specified value Leakage current The initial specified value Endurance Shelf Life DIMENSIONS [mm] Code : E d Sleeve (PET : Brown) F0.5 Terminal D d D' F D' L' L' 15min. 5 0.5 2.0 8 6.3 0.6 0.5 3.5 2.5 D+0.5max. L+1.5max. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L E- AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7F:4R7, 10F:100,100F:101) Lead forming*taping code Terminal code Voltage code (ex. 16V:160, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001M MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life for5 to8 product, 105 New! LE Series STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 100 Cap (F) Case size DxL(mm) tan Rated ripple current (mArms/105,100kHz) Part No. 100 220 330 47 100 220 33 47 100 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47 100 10 22 33 47 1.0 2.2 3.3 4.7 10 22 5x11 6.3x11 8x11.5 5x11 6.3x11 8x11.5 5x11 5x11 6.3x11 5x11 6.3x11 8x11.5 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 5x11 6.3x11 6.3x11 8x11.5 5x11 5x11 5x11 5x11 6.3x11 8x11.5 0.45 0.45 0.45 0.35 0.35 0.35 0.30 0.30 0.30 0.22 0.22 0.22 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.17 0.17 0.17 0.17 0.15 0.15 0.15 0.15 0.15 0.15 130 210 330 130 210 330 130 130 210 130 210 330 25 35 70 80 90 110 190 190 270 80 170 170 240 40 50 60 70 150 230 ELE-100E101ME11D ELE-100E221MF11D ELE-100E331MHB5D ELE-160E470ME11D ELE-160E101MF11D ELE-160E221MHB5D ELE-250E330ME11D ELE-250E470ME11D ELE-250E101MF11D ELE-350E330ME11D ELE-350E470MF11D ELE-350E101MHB5D ELE-500E1R0ME11D ELE-500E2R2ME11D ELE-500E3R3ME11D ELE-500E4R7ME11D ELE-500E100ME11D ELE-500E220ME11D ELE-500E330MF11D ELE-500E470MF11D ELE-500E101MHB5D ELE-630E100ME11D ELE-630E220MF11D ELE-630E330MF11D ELE-630E470MHB5D ELE-101E1R0ME11D ELE-101E2R2ME11D ELE-101E3R3ME11D ELE-101E4R7ME11D ELE-101E100MF11D ELE-101E220MHB5D : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Capacitance(F) Multipliers Frequency(Hz) 1.0 to 10 22 to 33 47 to 330 120 0.42 0.55 0.70 1k 0.60 0.75 0.85 10k 0.80 0.90 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001M