MXC6226XC-B Prototyping Board MXC6226XC-B GENERAL DESCRIPTION The MXC6226XC-B provides a convenient and easy way to evaluate and prototype with the MXC6226XC dual axes accelerometer. The accelerometer and passive components are SMT mounted on the board. Each pin of the MXC6226XC SMT device is brought out to standard 0.10 inch on center connections on the sides of the prototyping board. Wires can either be soldered directly to the prototyping board or the DIP pins can be used with widely available breadboard kits. For complete performance specifications of the MXC6226XC refer to the MXC6226XC datasheet. PIN DESCRIPTION Pin P1-1 P1-2 P1-3 P2-1 P2-2 P2-3 Name VDD INT GND SDA SCL GND MXC6226XC-B Description Supply Voltage 2.5 to 5.5 V Interrupt Output Ground Serial Data Line for I2C Bus Serial Clock Line for I2C Bus Ground PCB CONNECTION DIMENSIONS SCHEMATIC OF THE MXC6226XC-B MXC6226XC-B MXC6226XC-B Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MXC6226XC-B Prototyping Board User's Guide MEMSIC, Inc. One Technology Drive, Suite 325, Andover, MA, 01810, USA Tel: +1 978 738 0900 Fax: +1 978 738 0196 www.memsic.com Page 1of 1 Rev A