MEMSIC MXC6226XC-B Prototyping Board User's Guide Page 1of 1 Rev A
MXC6226XC-B Prototyping Board
MXC6226XC-B
GENERAL DES CRIP TION
The MXC6226XC-B provides a convenient and easy way
to evaluate and prototype with the MXC6226XC dual axes
accelerometer. The accelerometer and passive co mponents
are SMT mounted on the board. Each pin of t he
MXC6226XC SMT device is brought out to standard 0.10
inch on center con nectio ns on the sides of the prototyping
board. Wires can either be soldered directly to the
prototyping board or the DIP pins can be used with widely
available breadboard kits.
For complete performance spe cifications of the
MXC6226XC refer to the MXC6226XC datasheet.
PIN DESCRIPTION
Pin
Name
Description
P1-1
VDD
Supply Voltage 2.5 to 5.5 V
P1-2
INT
Interrupt Output
P1-3
GND
Ground
P2-1
SDA
Serial Data Line for I2C Bus
P2-2
SCL
Serial Clock Line for I2C Bus
P2-3
GND
Ground
SCHEMATIC OF THE MXC6226XC-B
MXC6226XC-B
MXC6226XC-B
PCB CONNECTION DIMENSIONS
MXC6226XC-B
Information furnished by MEMSIC is believed to be accurate and reliabl e.
However, no responsibility is assumed by MEMSIC for its use, nor for any
infringem ents of pate nts or other right s of thir d pa rties , whi ch ma y res ult f rom
its use. N o licen se is gra nted b y impli catio n or oth erwis e unde r an y paten t or
patent rig hts of MEMSIC .
MEMSIC, Inc.
One Technolog y Drive, Suite 325, Andover, MA, 01810, USA
Tel: +1 978 738 0900 Fax: +1 978 738 0196
www.memsic.com
