Ordering number : ENN7486 12A02SS PNP Epitaxial Planar Silicon Transistors 12A02SS Low-Frequency General-Purpose Amplifier Applications Applications * Package Dimensions Low-frequency Amplifier, high-speed switching, small motor drive, muting circuit. unit : mm 2159A [12A02SS] Features 0.3 0.1 3 1 0.45 2 Bottom View 0.2 Side View 0.07 * 0.25 1.4 * Side View 0.8 * Top View 1.4 Large current capacitance. Low collector-to-emitter saturation voltage (resistance). RCE (sat) typ.=285m [IC=1A, IB=50mA]. Ultrasmall package facilitates miniaturization in end products. Small ON-resistance (Ron). 0.3 * 1 : Base 2 : Emitter 3 : Collector 0.6 3 0.07 1 2 SANYO : SSFP Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO --15 V Collector-to-Emitter Voltage VCEO --12 V Emitter-to-Base Voltage VEBO --5 V --0.8 A Collector Current IC Collector Current (Pulse) Collector Dissipation ICP PC Junction Temperature Tj Storage Temperature Tstg --1.6 A 200 mW 150 C --55 to +150 C Mounted on a glass-epoxy board (20301.6mm) Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Symbol ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Conditions Ratings min typ max Unit VCB= --12V, IE=0 --100 nA VEB= --4V, IC=0 --100 nA VCE= --2V, IC= --10mA 300 VCE= --2V, IC= --50mA 700 450 Marking : XK MHz Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O2203 TS IM TA-100605 No.7486-1/4 12A02SS Continued from preceding page. Parameter Symbol Output Capacitance Cob Collector-to-Emitter Saturation Voltage Ratings Conditions min typ Unit max VCB= --10V, f=1MHz 6 pF VCE(sat) IC= --400mA, IB= --20mA VBE(sat) V(BR)CBO IC= --400mA, IB= --20mA Collector-to-Base Breakdown Voltage IC= --10A, IE=0 --15 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC= --1mA, RBE= --12 V Emitter-to-Base Breakdown Voltage V(BR)EBO IE= --10A, IC=0 Base-to-Emitter Saturation Voltage Turn-ON Time Storage Time --120 --240 mV --0.9 --1.2 V --5 V ton tstg See specified Test Circuit. 30 ns See specified Test Circuit. 75 ns tf See specified Test Circuit. 15 ns Fall Time Switching Time Test Circuit IB1 PW=20s D.C.1% OUTPUT IB2 INPUT RB VR 50 RL + 220F + 470F VBE=5V VCC= --5V IC=20IB1= --20IB2= --400mA IC -- VCE --1000 --600 --3mA --500 --2mA --400 --300 --1mA --200 --0.5mA --800 --600 --400 --200 C --700 --25 --5mA 5C 25 C mA --30 mA --7mA Ta= 7 --800 VCE= --2V mA A m --10 5 --1 --20 Collector Current, IC -- mA --900 IC -- VBE --1200 Collector Current, IC -- mA --1000 --100 0 0 IB=0 Collector-to-Emitter Voltage, VCE -- mV Ta=75C 25C 5 --25C 3 2 2 3 5 7 --10 2 3 5 7 --100 Collector Current, IC -- mA 2 3 --0.2 5 7--1000 IT05096 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 IT05095 VCE(sat) -- IC --1000 7 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV VCE= --2V 7 DC Current Gain, hFE 0 IT05094 hFE -- IC 1000 100 --1.0 0 --100 --200 --300 --400 --500 --600 --700 --800 --900 --1000 IC / IB=20 3 2 --100 7 5 C 25 3 2 C 75 5C --2 Ta= --10 7 5 3 2 --1.0 --1.0 2 3 5 7 --10 2 3 5 7 --100 Collector Current, IC -- mA 2 3 5 7--1000 IT05097 No.7486-2/4 12A02SS VCE(sat) -- IC --1000 IC / IB=50 5 3 2 --100 7 5C =7 Ta 5C --2 5 C 25 3 2 --10 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 7 5 3 2 3 5 7 2 --10 Collector-to-Base Voltage, VCB -- V ON-resistance, Ron -- IB 2 1.0 7 5 3 2 0.1 --0.1 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 IT05099 fT -- IC VCE= --2V 5 3 2 100 7 5 3 2 2 3 5 7 --10 2 3 5 7 --100 2 3 5 7--1000 IT05101 Collector Current, IC -- mA PC -- Ta OUT 1k 3 2 250 IN 5 3 10 --1.0 3 Collector Dissipation, PC -- mW 7 75C 5 IT05100 1k f=1MHz Ta= --25C 7 7 Ron -- IB 10 25C --1.0 1000 Gain-Bandwidth Product, fT -- MHz Output Capacitance, Cob -- pF 10 2 2 Collector Current, IC -- mA f=1MHz 2 1.0 --1.0 3 IT05098 Cob -- VCB 3 5 --0.1 --1.0 5 7--1000 Collector Current, IC -- mA IC / IB=20 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 VBE(sat) -- IC --10 200 M ou nt 150 ed on ag las s-e po xy 100 bo ar d( 50 20 3 0 1 .6 m m ) 0 2 3 5 7 --1.0 2 Base Current, IB -- mA 3 5 7 --10 IT06091 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT05102 No.7486-3/4 12A02SS Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS No.7486-4/4