Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
+
–
fD
L
P
R
C
W
H
0.2 max.
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Surface Mount Type
Series : SVPF
● High voltage (50 V.DC max.)
● Large capacitance (1000 F max.)
● 105 °C 5000 h
● RoHS compliance, Halogen free
Features
Size code B6 C6 E7 E10 E12 F12
Category temperature range
–55 °C to +105 °C
Rated voltage range
16 V.DC to 25 V.DC
16 V.DC to 50 V.DC 16 V.DC 16 V.DC to 50 V.DC
Rated capacitance range
27 µF to 82 µF 10 µF to 180 µF 18 µF to 270 µF 560 µF 39 µF to 560 µF 68 µF to 1000 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+105 °C, 5000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change
Within ±20 % of the initial value
tan d< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Speci cations
Dimensions (not to scale)
✽ Externals of fi gure are the reference.
Unit : mm
Size
code
fD±0.5 L +0.1 W±0.2 H±0.2 C±0.2 R P±0.2
B6 5.0 5.9 5.3 5.3 6.0
0.6 to 0.8
1.4
C6 6.3 5.9 6.6 6.6 7.3
0.6 to 0.8
2.1
E7 8.0 6.9 8.3 8.3 9.0
0.6 to 0.8
3.2
E10 8.0
10.0 (±0.5)
8.3 8.3 9.0
0.8 to 1.1
3.2
E12 8.0 11.9 8.3 8.3 9.0
0.8 to 1.1
3.2
F12 10.0 12.6 10.3 10.3 11.0
0.8 to 1.1
4.6
−0.4
Apr. 201802
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
Series
Rated
voltage
(V.DC)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard (Reel size : f380)
fDL
Ripple ✽1
current
(mAr.m.s.)
ESR ✽2
(mΩ max.)
tan d ✽3LC ✽4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
SVPF
16
82 5.0 5.9 B6 3000 27 0.12 262
16SVPF82M
1500
180 6.3 5.9 C6 3300 22 0.12 576
16SVPF180M
1000
270 8.0 6.9 E7 3300 22 0.12 864
16SVPF270M
1000
560 8.0 10.0 E10 3900 18 0.12 1792
16SVPF560MX
500
8.0 11.9 E12 4950 14 0.12 1792
16SVPF560M
400
1000 10.0 12.6 F12 5400 12 0.12 3200
16SVPF1000M
400
20
56 5.0 5.9 B6 2800 30 0.12 224
20SVPF56MX
1500
120 6.3 5.9 C6 3200 25 0.12 480
20SVPF120M
1000
180 8.0 6.9 E7 3200 25 0.12 720
20SVPF180M
1000
390 8.0 11.9 E12 4950 14 0.12 1560
20SVPF390M
400
560 10.0 12.6 F12 5400 12 0.12 2240
20SVPF560M
400
25
27 5.0 5.9 B6 2450 40 0.12 135
25SVPF27MX
1500
47 6.3 5.9 C6 2800 30 0.12 235
25SVPF47M
1000
56 6.3 5.9 2800 30 0.12 280
25SVPF56M
1000
82 8.0 6.9 E7 3000 28 0.12 410
25SVPF82M
1000
100 8.0 6.9 3200 24 0.12 500
25SVPF100M
1000
180 8.0 11.9 E12 4650 16 0.12 900
25SVPF180M
400
330 10.0 12.6 F12 5000 14 0.12 1650
25SVPF330M
400
35
22 6.3 5.9 C6 2600 35 0.12 154
35SVPF22M
1000
39 8.0 6.9 E7 2800 30 0.12 273
35SVPF39M
1000
82 8.0 11.9 E12 4000 20 0.12 574
35SVPF82M
400
120 10.0 12.6 F12 4400 18 0.12 840
35SVPF120M
400
50
10 6.3 5.9 C6 2500 40 0.12 100
50SVPF10M
1000
18 8.0 6.9 E7 2700 35 0.12 180
50SVPF18M
1000
39 8.0 11.9 E12 3800 25 0.12 390
50SVPF39M
400
68 10.0 12.6 F12 4300 20 0.12 680
50SVPF68M
400
✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
Coeffi cient 0.05 0.3 0.7 1
Frequency correction factor for ripple current
Characteristics list
NEW
Apr. 201802
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>