THRU-HOLE POWER INDUCTORS AIUR-15, AIUR-16 SERIES | | | | | | | | | | | | | | | OPTIONS: * Bulk Pack is standard FEATURES: * Ferrite core with heat shrink tube * High Reliability APPLICATIONS: * Electronic Appliance * Noise Filtering PHYSICAL CHARACTERISTICS: STANDARD SPECIFICATIONS: Part Number AIUR-15 220M 270M 330K 390K 470K 560K 680K 820K 101K 121K 151K L (H) R DC ( ) Max I DC (A) Max Part Number AIUR-15 22 27 33 39 470 56 68 82 100 120 150 0.030 0.033 0.038 0.038 0.044 0.048 0.055 0.066 0.082 0.098 0.110 5.7 5.0 4.8 4.5 4.2 4.0 3.8 3.5 3.2 3.0 2.7 181K 221K 271K 331K 391K 471K 561K 681K 821K 102K TECHNICAL INFORMATION: L (H) R DC ( ) Max I DC (A) Max 180 220 270 330 390 470 560 680 820 1000 0.130 0.160 0.190 0.260 0.290 0.330 0.410 0.460 0.630 0.710 2.5 2.3 2.0 1.8 1.7 1.5 1.4 1.3 1.1 1.0 * Test frequency: 1KHz, 0.1VRMS * Inductance tolerance: M=20%, K=10% * IDC: Inductance drops 10% typical or, T 40C with rated IDC * Letter suffix indicates standard tolerance 0.71Max 18,0 0.79Max 20,0 0.22Max 5,5 1.10Min 28,0 O0.040 O1,00 0.12Min 3,0 0.394 10,00 * Operating Temperature: -40C to +85C * Storage Temperature: -55C to +125C * Marking: Inductance and tolerance ** No Tubing Part Number AIUR-16 L (H) R DC () Max I DC (A) Max Part Number AIUR-16 L (mH) R DC ( ) Max I DC (A) Max Part Number AIUR-16 L (H) R DC ( ) Max I DC (A) Max 3R9K 4R7K 5R6K 6R8K 8R2K 100K 120K 150K 180K 220K 270K 330K 390K 470K 560K 680K 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 0.020 0.022 0.027 0.029 0.036 0.041 0.046 0.050 0.062 0.071 0.073 0.090 0.102 0.120 0.162 0.186 2.70 2.50 2.30 2.10 1.90 1.70 1.55 1.40 1.30 1.20 1.10 0.92 0.84 0.76 0.70 0.66 820K 101K 121K 151K 181K 221K 271K 331K 391K 471K 561K 681K 821K 102K 122K 152K 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 0.240 0.270 0.310 0.372 0.456 0.535 0.625 0.816 1.0 1.2 1.3 1.8 2.1 3.0 3.3 3.5 0.580 0.530 0.460 0.440 0.390 0.350 0.320 0.300 0.280 0.240 0.225 0.210 0.190 0.165 0.155 0.135 182K 222K 272K 332K 392K 472K 562K 682K 822K 103K 123K 153K 183K 223K 273K 333K 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 5.7 6.2 7.6 8.5 10.3 11.3 13 17 20 27 31 45 51 60 66 100 0.125 0.115 0.105 0.096 0.084 0.076 0.070 0.064 0.057 0.053 0.047 0.043 0.038 0.035 0.033 0.029 TECHNICAL INFORMATION: PHYSICAL CHARACTERISTICS: 0.365Max 9,27 0.275Max 6,99 0.625 15,88 0.375 9,53 ABRACON IS ISO 9001 / QS 9000 CERTIFIED rev1.1-8/04 O0.025 O0,64 0.138 3,50 * Test frequency: 10KHz 0.1VRMS * Tolerance: K=10% (Standard) * Letter suffix indicates standard tolerance * Temperature: -40C to +125C with no load -40C to +85C with full rated current * Marking: Value and tolerance * IDC: 5% typical Lp drops from initial value * UL Shrink Tube Note: Where wires exits over flange to lead termination add 0.050" total to max diameter. Check SCD for detail E&M specification 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com