93
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
Linear and Rotary Position
Position sensors respond to the movement or location of a target, such as a
molding press slide or a pulley shaft, by producing either a digital or an
analogue output correlated to its location. Honeywell position sensors include
digital and analogue Hall-effect position sensors, magnetoresistive digital
sensors and potentiometric rotary and linear sensors. Sensors are directly
compatible with other electronic circuits for application flexibility.
With the combined capabilities of three well-known brand names - Data
Instruments, Clarostat, Electro and New England Instruments - Honeywell the
group continuously strives to remain at the forefront of position sensing
technology. In this catalogue we present our range of Linear and Rotary
Position transducers and Torque Watch gauges, all suitable for use in
industrial environments.
94 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
LFII Series
Longfellow II linear position transducer
The new Longfellow II incorporates design innovations to increase transducer
life and provide greater resistance to vibration, while providing a smooth high-
quality signal for demanding factory control applications. It has a solid
stainless steel shaft, longer front-end bearings, a vibration-free damped
element, a spring-loaded ball joint and a high precision precious metal wiper.
Carrier guides are extruded the full length of the housing to ensure smooth
operation even under severe side load conditions.
The newly designed internal components provide improvements based on
worldwide testing and field experience.
Operating temperature: -65 °C to 105 °C (-85 °F to 221 °F)
Supply voltage (max.): 30 Vdc
Linearity: ± 0.1 %
Starting force (max.):
Standard 0,45 kg (1.0 lb)
Water resistant 2,27 kg (5.0 lb)
Backlash (max.): 0,025 mm (0.001 in)
Total Resistance: 5000 Ohm
Shaft Ø: 1/4 in
Termination: Connector, Binder Series 681
Housing length: = Electrical travel + 3.19 in (81,02 mm)
Mechanical travel: = Electrical travel + 0.09 in (2,29 mm)
0.156 x 0.312 Slot, typ.
(3,962 x 7,925)
3
2
1
Shaft
extended
Mounting feet show above are for
standard LFII models only. Mounting
feet are not included with water
resistant LFII models. Water resistant
LFII models are shipped with brackets.
SCHEMATIC
'X' = Electrical travel + 3.19 in (81,0 mm)
'Y' = Electrical travel - 1.0 in (25,4 mm)
2.00
(50,80)
1.00
(25,40)
0.125
(3,175)
0.62
(15,90)
0.62
(15,90)
1.25
(31,80)
1.25
(31,80)
VIEW A-A
1.68
(42,70)
0.84
(21,30)
0.50
(12,70)
0.25
(6,40)
1.36
(34,5)
0.75 ±0.01
(19,00 ±0,20)
1.88
(47,8)
1/4" - 28 NF-2A Thread
7/16" across flats, typ.
"Y"
"X"
A
A
Mounting Feet (2)
OPTIONS
Standard
Mating connector, 3718401, sold separately
ELECTRICAL TRAVEL (IN (MM)) REFERENCE
6.0 (152,4) LF2S06N5KB6A
9.0 (228,6) LF2S09N5KB6A
12.0 (304,8) LF2S12N5KB6A
14.0 (355,6) LF2S14N5KB6A
18.0 (457,2) LF2S18N5KB6A
24.0 (609,6) LF2S24N5KB6A
30.0 (762,0) LF2S30N5KB6A
36.0 (914,4) LF2S36N5KB6A
48.0 (1219,2) LF2S48N5KB6A
Water resistant
Mating connector, E02903021, sold separately
ELECTRICAL TRAVEL (IN (MM)) REFERENCE
6.0 (152,4) LF2W06N5KB6A
9.0 (228,6) LF2W09N5KB6A
12.0 (304,8) LF2W12N5KB6A
14.0 (355,6) LF2W14N5KB6A
18.0 (457,2) LF2W18N5KB6A
24.0 (609,6) LF2W24N5KB6A
30.0 (762,0) LF2W30N5KB6A
36.0 (914,4) LF2W36N5KB6A
48.0 (1219,2) LF2W48N5KB6A
Linear and
Rotary
Position
Transducers
Honeywell Sensing and Control manufactures a variety of potentiometric position sensors. The sensors use a tried and
true potentiometric technology originally developed for military applications and more recently applied to industrial
markets. MystR® conductive plastic potentiometric sensors are long-life units designed for rugged industrial
applications. The proprietary MystR® conductive plastic has an extensive temperature range, infinite resolution and
provides absolute position measurement on power-up. Intermediate signal conditioning is not required for normal
ratio-metric position sensing. Very small stroke units (5 mm [0.2 in]) and units required to withstand exposure to
harsh chemicals or work immersed in many different oils are available. If there is heavy hose down or spray from oil or
water, a water resistant or waterproof potentiometer such as the AQ series should be used.
Linear products have CE approval, Intrinsically Safe For Class I, II, III, Division 1, Groups A, B, C, D, E, F, G With Entity.
Vmax: 30 Vdc, Imax: 100 mA, Ci: 0.0 micro F, Li: 0.0 mH, T4A @ 105 °C Ambient.
Mechanical life: 1 billion dither operations
Approvals: CE, NEMA 4 - water resistant
Housing: Anodized aluminium
Element: MystR® conductive plastic film
Shaft: Stainless steel
Wiper current: < 1 uA
Resolution: Infinite
95
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
LFII Metric Series
Longfellow II linear position transducer
2
1
3
34,5
(1.36)
19,00
(0.25)
Dimensions in mm (inches)
11,11 (0.48)
Across flats
47,8
(1.88)
50,8 (2.0)
42,7 (1.68)
21,3
(0.84) 12,7
(0.50)
6,4
(0.25)
4,1
(0.16) 3,962 x 7,925 Slot
(0.156 x 0.312)
'Y'
'X'
31,8
(1.25)
3,18
(0.125)
31,8
(1.25)
0,62
(0.02)
0,62
(0.02)
25,4
(1.00)
50,8
(2.00)
3
2
1
Shaft
extended
Connector
end
M6X1
'X' = Electrical travel + 91 mm (3.6 in)
'Y' = Electrical travel - 25 mm (1.0 in)
(EXCEPT for LFII 229:
'Y' = Electrical travel - 29 mm (1.14 in)
Mounting feet show above are for
standard LFII models only. Mounting
feet are not included with water
resistant LFII models. Water resistant
LFII models are shipped with brackets.
Mounting Feet (2)
Operating temperature: -65 °C to 105 °C (-85 °F to 221 °F)
Supply voltage (max.): 30 Vdc
Linearity: ± 0.1 %
Starting force (max.):
Standard 0,45 kg (1.0 lb)
Water resistant 2,27 kg (5.0 lb)
Backlash (max.): 0,025 mm (0.001 in)
Total Resistance: 5000 Ohm
Shaft Ø: 1/4 in
Termination: Connector
A = Binder Series 681
G = DIN 43650
Housing length: = Electrical travel + 91,0 mm (3.6 in)
Mechanical travel: = Electrical travel + 2,2 mm (0.09 in)
OPTIONS
Standard - Binder
Mating connector, 3718401, sold separately
ELECTRICAL TRAVEL (MM (IN)) REFERENCE
152,4 (6.0) LF2S0152M5KB8A
228,6 (9.0) LF2S0229M5KB8A
304,8 (12.0) LF2S0305M5KB8A
355,6 (14.0) LF2S0355M5KB8A
457,2 (18.0) LF2S0457M5KB8A
609,6 (24.0) LF2S0610M5KB8A
762,0 (30.0) LF2S0762M5KB8A
914,4 (36.0) LF2S0914M5KB8A
1219,2 (48.0) LF2S1219M5KB8A
Standard - DIN 43650
Mating connector included
ELECTRICAL TRAVEL (MM (IN)) REFERENCE
152,4 (6.0) LF2S0152M5KB8G
228,6 (9.0) LF2S0229M5KB8G
304,8 (12.0) LF2S0305M5KB8G
355,6 (14.0) LF2S0355M5KB8G
457,2 (18.0) LF2S0457M5KB8G
609,6 (24.0) LF2S0610M5KB8G
762,0 (30.0) LF2S0762M5KB8G
914,4 (36.0) LF2S0914M5KB8G
1219,2 (48.0) LF2S1219M5KB8G
Water resistant - Binder
Mating connector, E02903021, sold separately
ELECTRICAL TRAVEL (MM (IN)) REFERENCE
152,4 (6.0) LF2W0152M5KB8A
228,6 (9.0) LF2W0229M5KB8A
304,8 (12.0) LF2W0305M5KB8A
355,6 (14.0) LF2W0355M5KB8A
457,2 (18.0) LF2W0457M5KB8A
609,6 (24.0) LF2W0610M5KB8A
762,0 (30.0) LF2W0762M5KB8A
914,4 (36.0) LF2W0914M5KB8A
1219,2 (48.0) LF2W1219M5KB8A
Water resistant - DIN 43650
Mating connector included
ELECTRICAL TRAVEL (MM (IN)) REFERENCE
152,4 (6.0) LF2W0152M5KB8G
228,6 (9.0) LF2W0229M5KB8G
304,8 (12.0) LF2W0305M5KB8G
355,6 (14.0) LF2W0355M5KB8G
457,2 (18.0) LF2W0457M5KB8G
609,6 (24.0) LF2W0610M5KB8G
762,0 (30.0) LF2W0762M5KB8G
914,4 (36.0) LF2W0914M5KB8G
1219,2 (48.0) LF2W1219M5KB8G
96 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
DR Series
Durastar rodless linear position transducer
The DuraStar rodless linear position transducer is the longest lasting factory-
rugged potentiometer. It allows large misalignment of shaft and housing, while
providing whisper-quiet operation and smooth, clean signal output. MystR®
provides the DuraStar excellent durability, especially in dither operation which
is so often the determining factor in a potentiometer’s life. It is an excellent
replacement unit to reduce maintenance operations.
The rodless side-sealed DuraStar can also be used to replace a rodded
potentiometer in contaminated applications to improve performance while
providing long life.
Operating temperature: -65 °C to 105 °C (-85 °F to 221 °F)
Supply voltage (max.): 75 Vdc
Linearity: ± 0.1 %
Starting force (max.): 0,45 kg (1.0 lb)
Backlash (max.): 0,025 mm (0.001 in)
Shaft: M5x0.8 metric thread
Termination: Connector, DIN 43560
Mechanical travel: = Electrical travel + 5,0 mm (0.2 in)
Mating connector included
ELECTRICAL TRAVEL TOTAL RESISTANCE HOUSING LENGTH REFERENCE
(MM (IN)) (OHM) (MM (IN))
101,6 (4.0) 2000 250,0 (9.84 ) DR04N02KB7G
127,0 (5.0) 2000 280,0 (11.02) DR05N02KB7G
152,4 (6.0) 5000 300,0 (11.81) DR06N05KB7G
203,2 (8.0) 5000 352,0 (13.86) DR08N05KB7G
228,6 (9.0) 5000 375,9 (14.80) DR09N05KB7G
304,8 (12.0) 5000 452,1 (17.80) DR12N05KB7G
355,6 (14.0) 5000 514,1 (20.24) DR14N05KB7G
406,4 (16.0) 5000 553,9 (21.8) DR16N05KB7G
457,2 (19.0) 5000 605,0 (23.8) DR18N05KB7G
508,0 (20.0) 5000 656,0 (25.83) DR20N05KB7G
609,6 (24.0) 10000 757,9 (29.84) DR24N10KB7G
762,0 (30.0) 10000 910,0 (35.83) DR30N10KB7G
914,4 (36.0) 10000 1062,5 (41.83) DR36N10KB7G
1016,0 (40.0) 10000 1164,0 (45.83) DR40N10KB7G
1270,0 (50.0) 10000 1418,0 (55.83) DR50N10KB7G
M5 X 0.8
Thread
M5 x 20
Thread
1
3
2
1.30
[33]
.65
[16]
.87
[22]
3.56
[90,4]
"L"
1.025
[26]
0.39 [10]
.60
[15]
3
2
1
SCHEMATIC DIAGRAM
1.50
[38]
.75
[19]
1.97
[50]
2.68
[68]
1.30
[33]
0.44 [11,2]
2.33 [59,27]
1.46 [37,0]
2.05 [52,07]
Pin 1 is at the connector end
97
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
SLF Series
Short Longfellow linear position transducer
The Short Longfellow is frequently used for measuring linear position or
displacement up to 6 inches (152,4 mm) on a wide variety of manufacturing
and process equipment. The mechanical design of the unit’s front bearing,
anodized extruded aluminum housing, stainless steel shaft and precious metal
wipers are suitable for a factory’s harsh environment.
Based on the proprietary MystR® conductive plastic film, it provides a high
resolution, absolute position measurement without external signal
conditioners.
0.90
(22.9)
0.45
(11.4)
X
Movable
mounting
brackets
7/16 in.
(6.6)
across
flats
1/4-28 NF-2A thread
1/4 in.
(6.3)
across
flats
1
5
0.06
(1.5)
0.45
(11.4)
0.90
(22.8)
0.90
(22.8)
1.36
(34.5)
0.45
(11.4)
1
2000 ohm
current limiting resistor
Shaft
Extended
2
3
0.154 (3.91)
(2 holes per bracket)
MOUNTING BRACKETS
1.35
(34.4)
1.75
(44.5)
0.88
(22.4)
0.68
(17.2)
0.19
(4.8)
0.38
(9.6)
Operating temperature: -65 °C to 105 °C (-85 °F to 221 °F)
Supply voltage (max.): 40 Vdc
Starting force (max.):
Standard 0,45 kg (1.0 lb)
Water resistant 2,27 kg (5.0 lb)
Backlash (max.): 0,025 mm (0.001 in)
Shaft Ø: 1/4 in
Termination: Connector, Binder Series 681
Housing length: = Electrical travel + 3.05 in (77,5 mm)
Mechanical travel: = Electrical travel + 0.2 in (5,1 mm)
Electrical Travel Total Resistance
(in (mm)) (Ohm)
SLF01 or SLW01 1.0 (25,4) 1500
SLF02 or SLW02 2.0 (50,8) 3000
SLF03 or SLW03 3.0 (76,2) 4500
SLF04 or SLW04 4.0 (101,6) 6000
SLF06 or SLW06 6.0 (152,4) 9000
OPTIONS
Standard
Mating connector, 3718401, sold separately
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) SLF01N1500B6A
2.0 (50,8) SLF02N3000B6A
3.0 (76,2) SLF03N4500B6A
4.0 (101,6) SLF04N6000B6A
6.0 (152,4) SLF06N9000B6A
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) SLF01N1500F6A
2.0 (50,8) SLF02N3000F6A
3.0 (76,2) SLF03N4500F6A
4.0 (101,6) SLF04N6000F6A
6.0 (152,4) SLF06N9000F6A
Water resistant
Mating connector, E02903021, sold separately
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) SLW01N1500B6A
2.0 (50,8) SLW02N3000B6A
3.0 (76,2) SLW03N4500B6A
4.0 (101,6) SLW04N6000B6A
6.0 (152,4) SLW06N9000B6A
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) SLW01N1500F6A
2.0 (50,8) SLW02N3000F6A
3.0 (76,2) SLW03N4500F6A
4.0 (101,6) SLW04N6000F6A
6.0 (152,4) SLW06N9000F6A
98 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
SLF Metric Series
Short Longfellow linear position transducer
22.9
11.4
1.5
22.9
11.4
X
34.5
11.4
Movable
mounting
brackets
6.6
across
flats
M6 x 1
metric
threa
d
6.3
across
flats
1
5
1
2000
ohm
S
haft
E
xtended
2
3
4.8 9.7
22.2
44.5
3.91
(2 holes
p
er bracket
)
MOUNTING
BRACK
ETS
34.3
17.1
current limiting resistor
Operating temperature: -65 °C to 105 °C (-85 °F to 221 °F)
Supply voltage (max.): 40 Vdc
Starting force (max.):
Standard 0,45 kg (1.0 lb)
Water resistant 2,27 kg (5.0 lb)
Backlash (max.): 0,025 mm (0.001 in)
Shaft Ø: M6x1 metric thread
Termination: Connector, Binder Series 681
Housing length: = Electrical travel + 77,5 mm (3.05 in)
Mechanical travel: = Electrical travel + 5,1 mm (0.2 in)
Electrical Travel Total Resistance
(in (mm)) (Ohm)
SLF025R4 or SLW025R4 25,4 (1.0) 1500
SLF050R8 or SLW050R8 50,8 (2.0) 3000
SLF076R2 or SLW076R2 76,2 (3.0) 4500
SLF101R6 or SLW101R6 101,6 (4.0) 6000
SLF152R4 or SLW152R4 152,4 (6.0) 9000
OPTIONS
Standard
Mating connector, 3718401, sold separately
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
25,4 (1.0) SLF025R4M1500B8A
50,8 (2.0) SLF050R8M3000B8A
76,2 (3.0) SLF076R2M4500B8A
101,6 (4.0) SLF101R6M6000B8A
152,4 (6.0) SLF152R4M9000B8A
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
25,4 (1.0) SLF025R4M1500F8A
50,8 (2.0) SLF050R8M3000F8A
76,2 (3.0) SLF076R2M4500F8A
101,6 (4.0) SLF101R6M6000F8A
152,4 (6.0) SLF152R4M9000F8A
Water resistant
Mating connector, E02903021, sold separately
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
25,4 (1.0) SLW025R4M1500B8A
50,8 (2.0) SLW050R8M3000B8A
76,2 (3.0) SLW076R2M4500B8A
101,6 (4.0) SLW101R6M6000B8A
152,4 (6.0) SLW152R4M9000B8A
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
25,4 (1.0) SLW025R4M1500F8A
50,8 (2.0) SLW050R8M3000F8A
76,2 (3.0) SLW076R2M4500F8A
101,6 (4.0) SLW101R6M6000F8A
152,4 (6.0) SLW152R4M9000F8A
99
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
LT Series
Linear position transducer, 1/2 in diameter
The LT Series are ½ inch diameter, linear position transducers rugged enough
to withstand the hostile environment of the factory. The LT can be provided
with shaft seals for spray or hose down environments.
Operating temperature: -40 °C to 80 °C (-40 °F to 176 °F)
Supply voltage (max.): 30 Vdc
Starting force (max.):
Standard 28,35 g (1.0 oz)
Water resistant 340,19 g (12.0 oz)
Backlash (max.): 0,00508 mm (0.0002 in)
Shaft Ø: 1/8 in
Termination: Cable
Housing length: = Electrical travel + 1.50 in (38,10 mm)
Mechanical travel: = Electrical travel + 0.05 in (1,27 mm)
Electrical Travel Total Resistance
(in (mm)) (Ohm)
LTS01 or LTW01 1.0 (25,4) 1000
LTS02 or LTW02 2.0 (50,8) 2000
LTS03 or LTW03 3.0 (76,2) 3000
LTS04 or LTW04 4.0 (101,6) 4000
LTS05 or LTW05 5.0 (127,0) 5000
LTS06 or LTW06 6.0 (152,4) 6000
LTS07 or LTW07 7.0 (177,8) 7000
LTS08 or LTW08 8.0 (203,2) 8000
LTS09 or LTW09 9.0 (228,6) 9000
LTS10 or LTW10 10.0 (254,0) 10000
(Retracted)
#4-40 UNC-2A
Thd x .50 (12.7) Long
1" [25,4]
1/2"
[12.7]
1/8" [3.17]
(Red)
V-in
Shaft
Extended
(Black)
Ground
(Brown)
V-out
Connect to High Impedance Circuit
# 28 Jacketed cable
6.0 (152,4) long min.
Housing length 'X'
(Electrical Travel +1.50 (38,1))
OPTIONS
Standard
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) LTS01N01KB5C
2.0 (50,8) LTS02N02KB5C
3.0 (76,2) LTS03N03KB5C
4.0 (101,6) LTS04N04KB5C
5.0 (127,0) LTS05N05KB5C
6.0 (152,4) LTS06N06KB5C
7.0 (177,8) LTS07N07KB5C
8.0 (203,2) LTS08N08KB5C
9.0 (228,6) LTS09N09KB5C
10.0 (254,0) LTS10N10KB5C
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) LTS01N01KF5C
2.0 (50,8) LTS02N02KF5C
3.0 (76,2) LTS03N03KF5C
4.0 (101,6) LTS04N04KF5C
5.0 (127,0) LTS05N05KF5C
6.0 (152,4) LTS06N06KF5C
7.0 (177,8) LTS07N07KF5C
8.0 (203,2) LTS08N08KF5C
9.0 (228,6) LTS09N09KF5C
10.0 (254,0) LTS10N10KF5C
Water resistant
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) LTW01N01KB5C
2.0 (50,8) LTW02N02KB5C
3.0 (76,2) LTW03N03KB5C
4.0 (101,6) LTW04N04KB5C
5.0 (127,0) LTW05N05KB5C
6.0 (152,4) LTW06N06KB5C
7.0 (177,8) LTW07N07KB5C
8.0 (203,2) LTW08N08KB5C
9.0 (228,6) LTW09N09KB5C
10.0 (254,0) LTW10N10KB5C
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) LTW01N01KF5C
2.0 (50,8) LTW02N02KF5C
3.0 (76,2) LTW03N03KF5C
4.0 (101,6) LTW04N04KF5C
5.0 (127,0) LTW05N05KF5C
6.0 (152,4) LTW06N06KF5C
7.0 (177,8) LTW07N07KF5C
8.0 (203,2) LTW08N08KF5C
9.0 (228,6) LTW09N09KF5C
10.0 (254,0) LTW10N10KF5C
100 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
MLT Series
Linear position transducer, 3/8 in Diameter
The MLT Series is 3/8 in diameter linear position transducer that is rugged
enough to withstand hostile factory environments. Using a proprietary dual
wiper, internal ball joint and the MystR® conductive plastic film the MLT
provides a usable output at high vibration levels over long periods of time.
MLT transducers use precious metal wipers to further enhance reliability.
The MLT’s 3/8 inch diameter is among the smallest available and can used to
replace LVDT’s in many applications.
Operating temperature: -40 °C to 80 °C (-40 °F to 176 °F)
Supply voltage (max.): 30 Vdc
Starting force (max.): 28,35 g (1.0 oz)
Backlash (max.): 0,0127 mm (0.0005 in)
Shaft Ø: 1/8 in
Termination: Cable
Housing length: = Electrical travel + 1.20 in (30,48 mm)
Mechanical travel: = Electrical travel + 0.05 in (1,27 mm)
Electrical Travel Total Resistance
(in (mm)) (Ohm)
MLT0R5 0.5 (12,7) 750
MLT001 1.0 (25,4) 1500
MLT002 2.0 (50,8) 3000
MLT003 3.0 (76,2) 4500
MLT004 4.0 (101,6) 6000
MLT005 5.0 (127,0) 7500
MLT006 6.0 (152,4) 9000
(Retracted)
#4-40 UNC-2A
Thd x .50 [12,7] long
3/4"
[19,05]
1/8"
[3,18]
3/8"
[9,53]
(Electrical Travel +1.2 [30,48] )
(Red)
V- i n
Shaft
Extended
(Black)
Ground
(Orange)
V-out
Housing length 'X'
Connect to High Impedance Circuit
3 - conductor cable
#26 AWG [65/44] 12.0 [306] long min.
(color coded per schematic)
3/16 x .063
[4,75 x 1,6]
OPTIONS
± 0.1 % Linearity
ELECTRICAL TRAVEL REFERENCE
2.0 (50,8) MLT002N3000B5C
3.0 (76,2) MLT003N4500B5C
4.0 (101,6) MLT004N6000B5C
5.0 (127,0) MLT005N7500B5C
6.0 (152,4) MLT006N9000B5C
± 0.25 % Linearity
ELECTRICAL TRAVEL REFERENCE
1.0 (25,4) MLT001N1500D5C
± 1.0 % Linearity
ELECTRICAL TRAVEL REFERENCE
0.5 (12,7) MLT0R5N0750F5C
1.0 (25,4) MLT001N1500F5C
2.0 (50,8) MLT002N3000F5C
3.0 (76,2) MLT003N4500F5C
4.0 (101,6) MLT004N6000F5C
5.0 (127,0) MLT005N7500F5C
6.0 (152,4) MLT006N9000F5C
101
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
AQLT/AQMLT Series
Shaftless, waterproof linear position
transducer
The AQLT and AQMLT are shaftless waterproof linear potentiometers designed
to operate in wet/washdown and in-tank environments.
The AQ series features an external actuator magnetically coupled to a position
feedback element. The magnetic actuator replaces the shaft, found in
traditional linear transducers, and eliminates the need for additional stroke
length mounting space.
Precious metal dual wipers, MystR® proprietary conductive plastic, and
anodized aluminum housings provide long life and reliable operation in
numerous applications.
Operating temperature: -40 °C to 80 °C (-40 °F to 176 °F)
Supply voltage (max.): 30 Vdc
Linearity: ± 1.0 %
Starting force (max.): AQMT 56,7 g (2.0 oz)
AQMLT 28,35 g (1.0 oz)
Sealing: IP68
Termination: Cable
AQLT Series
Housing length: = Electrical travel + 54,87 mm (2.16 in)
Mechanical travel: = Electrical travel + 2,54 mm (0.1 in)
BLACK
CABLE END
RED
BROWN
ELECTRICAL TRAVEL
PLUS 2.16" (54,86)
0.76
(19,30) 0.20
(5,08)
Ø 0.50
(12,7)
3 WIRE JACKETED CABLE (9/64 Ø)
#28 AWG CONDUCTOR
10 FEET LONG
COLOR CODED PER SCHEMATIC
AREA AVAILABLE FOR CLAMPING
WITHOUT RESTRICTING ELECTRICAL TRAVEL
Ø 0.516
(13,11)
Ø 0.156
(3,96)
Ø 0.813
(20,65)
BOLT CIRCLE
#4-40 UNC THD
6 PLACES
Dimensions in inches (mm)
Ø 1.25
(31,75)
0.024 (0,61)
OFF CENTER
0.25
(6,35)
0.50
(12,70)
1.125 ±0.010
(28,575 ±0,25)
120˚ 120˚
1.00 ±0.010
(25,4 ±0,25)
ELECTRICAL TRAVEL TOTAL RESISTANCE REFERENCE
(MM (IN)) (OHM)
152,4 (6.0) 6000 AQLT06N06KFC
304,8 (12.0) 12000 AQLT12N12KFC
457,2 (18.0) 18000 AQLT18N18KFC
609,6 (24.0) 24000 AQLT24N24KFC
762,0 (30.0) 30000 AQLT30N30KFC
965,2 (38.0) 38000 AQLT38N38KFC
AQMLT Series
Housing length: = Electrical travel + 38,1 mm (1.5 in)
Mechanical travel: = Electrical travel + 2,54 mm (0.1 in)
AREA AVAILABLE FOR CLAMPING
WITHOUT RESTRICTING ELECTRICAL OR
MECHANICAL TRAVEL
Dimensions are in inches (mm)
0.52
(13,2)
0.20
(5,1)
Ø 0.375
(9,5)
ELECTRICAL TRAVEL PLUS 1.5 (38,1) MAX
3 WIRE JACKETED CABLE, Ø 0.14 (3,57)
#28 AWG CONDUCTOR
10 FEET LONG (3,05 M)
COLOR CODED PER SCHEMATIC Cable End
Black Red
Wiper
Brown
Schematic
Ø 1.125
(28,58)
Ø 0.388
(9,78)
Ø 0.156
(3,96)
120˚ 120˚
Ø 0.690
(17,53)
BOLT CIRCLE
0.125
(3,18)
0.024
(0,60)
OFF CENTER
#4-40 UNC THD
4 PLACES
0.500
(12,70)
1.000
(25,40)
0.250
(6,35)
ELECTRICAL TRAVEL TOTAL RESISTANCE REFERENCE
(MM (IN)) (OHM)
12,7 (0.5) 750 AQMLTR5N00750FC
25,4 (1.0) 1500 AQMLT01N01500FC
76,2 (3.0) 3000 AQMLT03N04500FC
152,4 (6.0) 9000 AQMLT06N09000FC
228,6 (9.0) 13500 AQMLT09N13500FC
304,8 (12.0) 18000 AQMLT12N18000FC
102 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
M22 Series
Rotary position transducer
The M22 rotary potentiometer, available in servo and bushing mount, utilizes
wear-resistant MystR® conductive plastic film combined with precious metal
wipers to produce a quiet operating, low-noise, stable signal. Gold plated
terminals eliminate soldering problems due to tarnish. The high-quality
components are packaged in a cost-effective housing designed with an
anodized aluminum face plate or nickel-plated brass bushing to handle
assembly and operating loads. The integral internal terminations eliminate the
need for internal wires which may break under vibration and thermal stress.
The M22 series rotary potentiometers are used in position-sensing
applications which demand high reliability at low cost.
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Supply voltage (max.): 30 Vdc
Starting force (max.): M22B 0.3 oz in (torque)
M22S 1.0 oz in (torque)
Total resistance: 2000 Ohm
Backlash (max.): 0.1°
Shaft Ø: 3,175 mm (0.125 in)
Termination: Gold plated solder terminals
Housing size: 22,0 mm (0.87 in)
Bearing type: Sleeve
Mechanical travel: M22B 330°
M22S Continuous rotation
Electrical travel: M22B 320°
M22S 340°
OPTIONS
Threaded bushing mount
LINEARITY REFERENCE
± 0.5 % M22B2KE1S
± 1.0 % M22B2KF1S
Servo mount
LINEARITY REFERENCE
± 0.25 % M22S2KD1S
± 0.5 % M22S2KE1S
± 1.0 % M22S2KF1S
slot
M22S
13
2
30
60
R 0.19
(R 4.93)
( 22.40)
0.88
0.15
(3.81)
0.062
(1.57)
0.750/.749
( 19.05/19.025)
0.125/.124
( 3.175/3.150)
0.062
(1.57)
0.057 min.
(1.44)
0.50
(12.60)
( 19.05)
0.75 max.
0.50 ±0.03
(12.70 ±0.8)
13
2
0.15
(3.81)
0.38
(9.70)
0.38
(9.70)
0.06
(1.57)
0.87 ±.03
(22.00 ±0.8)
0.06
(1.57) 30
60
3/8-32 UNEF-2A
R 0.19
(R 4.93)
0.406 / 0.401
( 10.312 / 10.185)
0.125/.124
( 3.175/3.150)
( 1.57)
0.06
0.09
( 2.36)
( 22.40)
0.88
0.31
(7.92)
0.03
(0.8)
0.06
(1.5)
0.38
(9.5)
0.03
(0.8)
0.09
( 2.36)
M22B
flat
103
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
WPM Series
Rotary position transducer, servo mount
Available in servo mount styles, the WPM Series rotary transducer provides
long life by utilizing the proprietary MystR® conductive plastic film, precious
metal wipers and shielded ball bearings on the stainless steel shaft.
The MystR® film provides exceptionally long rotational and dither life without
sacrificing microlinearity or resolution. The shielded ball bearings ensure long
life even with side load conditions.
Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F)
Supply voltage (max.): 60 Vdc
Total resistance: 5000 Ohm
Backlash (max.): 0.01 %
Shaft Ø: WPM5KA4* 3,175 mm (0.125 in)
WPM5KB1* 6,35 mm (0.25 in)
Termination: Gold plated solder terminals
Bearing type: Ball bearings
Mechanical travel: Continuous rotation
Approvals: MIL-PRF-39023 qulaified
OPTIONS
A4
ELECTRICAL TRAVEL STARTING FORCE LINEARITY REFERENCE
(MAX.)
350° 0.8 oz in (torque) ± 0.075 % WPM5KA4S4513
353° 1.0 oz in (torque) ± 0.075 % WPM5KA4S6520
B1
ELECTRICAL TRAVEL STARTING FORCE LINEARITY REFERENCE
(MAX.)
340° 0.4 oz in (torque) ± 0.1 % WPM5KB1S1809
345° 0.4 oz in (torque) ± 0.1 % WPM5KB1S2511
.062
(1.57)
.078
(1.98)
2.000
Dia.
(50.80)
1.875 / 1.874
Dia.
(47.62 / 47.60)
0.2497 / 0.2494
Dia. shaft
(6.342 / 6.334)
0.093
(2.36)
0.333
(8.46)
0.500 ±0.032
(12.70 ±0.81)
0.800
(20.32)
M
A
D
E
I
N
U
.
S
.
A
.
123
1
5
˚
3
0
˚
1.25
Rad. max.
(31.7)
WPM 65-20
0.062
(1.57) 0.078
(1.98)
1.3125 / 1.3120
Dia.
(33.34 / 33.32)
0.2497 / 0.2494
Dia. shaft
(6.342 / 6.334)
0.093
(2.36)
0.335
(8.51)
0.500 ±0.032
(12.70 ±0.81)
0.774
(19.66)
1.437
Dia.
(36.50)
4
0
˚
M
A
D
E
I
N
U
.
S
.
A
.
123
0.98
Rad. max.
(24.9)
2
0
˚
WPM 45-13
0.062
(1.57)
0.064 / 0.057
(1.63 / 1.45)
0.7500 / 0.7495
Dia.
(19.05/19.04)
0.1249 / 0.1246
Dia.
(3.172/3.165)
0.260
(6.60)
0.500 ±0.032
(12.70 ±0.81) 0.625
(15.88)
0.062
(1.57)
WPM 18-09
1
2
3
0.68 Rad.
max.
M
A
D
E
I
N
U
.
S
.
A
.
3
0
˚
T
y
p
.
0.875 Dia.
(22.22)
3
0
˚
0.062
(1.57)
0.064/0.057
(1.63/1.45)
0.9688 / 0.9683
Dia.
(24.608 / 24.595)
0.1249 / 0.1246
Dia.
(3.172 / 3.165)
0.275
(6.98)
0.500 ±0.032
(12.70±.81) 0.609
(16.29)
0.062
(1.57)
1
2
3
0.78 Rad.
max.
M
A
D
E
I
N
U
.
S
.
A
.
1.062
Dia.
(26.97)
0.970
Dia.
(24.64)
3
0
˚
3
0
˚
WPM 25-11
104 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
Torque Watch
Guages
The Torque Watch, an industry mainstay when an accurate indication of rotary force is necessary, is
simple to use, requiring no special tools or setups. Available in three models they cover ranges from
0.003 to 200 inch-ounces. Attach the gauge to the device being measured, and simply rotate it, for a
direct reading dial.
Protection against over-torque is provided by a stainless steel internal rotation stop. The low range
366 Series will prevent damage from over-torque up to three times the normal range, whilst the mid range
641 Series and the high range 940 Series will prevent damage up to twice the normal range.
Models are available in standard (ounce inch), metric (gram centimeter) and System International
(Newton meter) measuring options.
366 Series
Low range
0.003 - 0.60 oz in
The Series 366 Torque Watch accurately measures
very low torque. Three miniature adapter chucks
allow simple coupling to the device being
measured.
OPTIONS
Standard
OUNCE INCHES REFERENCE
0.06 to 0.6 366-0
0.01 to 0.1 366-2
0.003 to 0.03 366-3
Metric
GRAM CENTIMETER REFERENCE
6 to 42 366-0M
1 to 7.5 366-2M
0.2 to 2 366-3M
651 Series
Mid range
0.05 - 40.0 oz in
The Series 651 Torque Watch provides accurate
measurement of low static torque. A 1/4 inch
keyed chuck provides a simple means of coupling
to the device under measurement.
OPTIONS
Standard
OUNCE INCHES REFERENCE
0.05 to 1.2 651C-1
1 to 20 651C-2
2 to 40 651C-3
0.1 to 2.4 651X-2
0.25 to 5 651X-3
0.5 to 10 651X-4
Metric
GRAM CENTIMETER REFERENCE
2.5 to 80 651C-1M
50 to 1.2 K 651C-2M
150 to 2.8 K 651C-3M
5 to 150 651X-2M
10 to 300 651X-3M
25 to 600 651X-4M
System International
NEWTON METER REFERENCE
0.5 to 9 651C-1SI
10 to 140 651C-2SI
15 to 285 651C-3SI
1 to 18 651X-2SI
2 to 36 651X-3SI
5 to 70 651X-4SI
940 Series
High range
15.0 - 200.0 oz in
The Series 940 Torque Watch accurately measures
torque in values that range form 15.0 to 200 oz/in.
A 3/8 inch keyed chuck and 3/8 inch square socket
driver adapter provide a simple means of coupling
to the device under measurement.
OPTIONS
Standard
OUNCE INCHES REFERENCE
30 to 200 940-1
15 to 100 940-2
Metric
GRAM CENTIMETER REFERENCE
2.5 K to 14.3 K 940-1M
1 K to 7.1 K 940-2M
System International
NEWTON METER REFERENCE
0.25 to 1.4 940-1SI
0.1 to 0.7 940-2SI
105
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
TH100 Series
The TH-100 Series puts Honeywell’s proven variable-resistor technology to
work in angle-management applications such as control-lever sensing and
equipment position feedback. High performance and low cost make it
attractive for a wide range of applications. Special electrical and mechanical
configurations, including dual tracks, D-shape rotor holes, etc. are available on
special order.
The device provides for angle measurements, has 152,4 mm (6.0 in) wire
leads, a 6,35 mm (0.25 in) slotted thru hole and is sealed.
Power rating: 0.5 W max.
Element type: Conductive plastic
Terminal type: three 20 AWG
Shaft: 6,35 mm (0.25 in) thru hole with .105 w x .090 d slot
Body: 38,1 mm (1.5 in) x 45,72 mm (1.8 in)
Electrical taper: Linear
Storage & operating temperature: -40 °C to 120 °C (-40 °F to 248 °F)
Working voltage (max): 350 Vdc
Linearity: ± 5% standard; to ± 1% special
Total resistance: 10 K
Total resistance tolerance: ± 15%
Rotational cycles: > 1 million
OPTIONS
180° Rotation
TAPER CABLE CONNECTOR REFERENCE
Linear No 640CS103A06NAAY
90° Rotation
TAPER CABLE CONNECTOR REFERENCE
Linear No 640ES103A06NAAY
HRS100 Series, Hall-effect
The HRS100 provides angular position information for a variety of sensing
and control applications in the automotive, marine, truck, off-road, industrial
implementation, aerospace, and rail industries. The use of magnetically
coupled information in place of a mechanical wiper assembly provides a long
life, cost-effective solution for harsh environments that include temperature,
vibration, dither, moisture and dirt.
This position sensor incorporates Hall-effect to provide a sensing device that
will last for more than 50 million operations. The device is packaged in a metal
housing with a 9,5 mm (0.375 in) diameter bushing and a 6,35 mm (0.25 in)
diameter slotted shaft and solder lug terminals.
Terminal type: Straight solder lug
Bushing: 9,52 mm (.375 in) FMS, includes C-ring
Shaft: Slotted 6,32 mm ± 0,03 (0.249 in ± 0.001)
Body: 27,79 mm (1.094 in) Ø
Electrical taper: Linear
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Supply voltage (max): 5 Vdc
Linearity: ± 2%
Rotational cycles: 10 million
Mechanical operating angle: 90°
3.3 [0.13]
2,84 [0.12]
13,2 [0.52]
20,32 [0.08]
9,53 [0.375]
Mounting Surface
27,69 [1.09]
2
2,23 [0.875]
GRD VDD
Output 19,05 [0.75]
OPTIONS
90° Rotation
SHAFT LUG REFERENCE
Slotted Straight Solder HRS100SSAB090
Clarostat Rotary Position Transducers
106 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
578 Series, Precision potentiometer
The 578 Series conductive plastic precision potentiometer puts Honeywell’s
proven variable resistor technology to work in a high performance, cost-
effective device. With its compact size, rugged construction and advanced
versatility, the 578 provides superior control for applications such as joy-stick
controllers and position-sensing devices.
The model 578 features a 9,5 mm x 9,5 mm (0.375 in x 0.375 in) bushing,
6,35 mm x 19,05 mm (0.25 in x 0.75 in) slotted shaft, linear taper, and type A
pc pins (please consult with the factory for custom OEM configurations).
Power rating: 0.5 W @ 70 °C (158 °F)
Element type: Conductive plastic
Terminal type: PC pin type A
Bushing: 9,52 mm (0.375 in) D x 9,52 mm (0.375 in) L
Shaft: 6,35 mm x 19,05 mm (0.25 in x 0.75 in) Slotted
Body: 22,86 mm (0.900 in) Ø
Electrical taper: Linear
Operating temperature: -40 °C to 100 °C (-40 °F to 212 °F)
Working voltage: 400 Vdc
Linearity: 1%
Total resistance tolerance: ± 10%
Revolutions: 5 million
Mechanical rotation: 320° ± 5°
Ø22,96 [Ø 0.90 ]
14,49 ± 0,25 [0.57 ±.010] 0.48 ± 0.01]
15,24 ± 0,25 [0.60 ±.01
]
5,08 ± 0,25 [0.20 ±.010] (2X)
19,05 ± 0,25 [ 0.075 ±.010] (2X)
30˚
CW
C
L
C
L
W CCW
ANTI-ROTATIONAL PIN
Ø 0.06 ±.005]
11,08 [0.46]
.010
3/8-32 UNEF
3,3 ± 0,25 [
0.13 ±.01
]
1,02 ± 0,25 [
0.04 ±.01]
5,84 ± 0,25
[0.23 ±.01]
TYPE "A" MOUNTING
Ø 6,35
[ Ø 0.25 ]
Ø 1,52 ± 0,13 [
12,16 ± 0,25 [
T
OPTIONS
1 kOhm Resistance
SHAFT RESISTANCE TAPER REFERENCE
Slotted stainless steel Linear 578X1G48S102SA
5 kOhm Resistance
SHAFT RESISTANCE TAPER REFERENCE
Slotted stainless steel Linear 578X1G48S502SA
10 kOhm Resistance
SHAFT RESISTANCE TAPER REFERENCE
Slotted stainless steel Linear 578X1G48S103SA
574 Series, Commercial potentiometer
The 574 Series conductive plastic potentiometer offers low mounting profile,
smooth feel, and robust construction with a thermoplastic housing, bushing,
and shaft. Terminals are PC style with a bracket for vertical mounting. No
hardware is included.
Power rating: 0.25 W @ 70 °C (158 °F)
Element type: Conductive plastic
Terminal type: PC terminals type C with C mounting bracket
Bushing: M9 x 6,35 mm (0.25 in) L
Shaft: 6,35 (0.25 in) Ø x 19,05 (0.75 in) L
Body: 21,08 mm (0.830 in) square
Electrical taper: Linear
Operating temperature: -40 °C to 120 °C (-40 °F to 248 °F)
Working voltage: 350 Vac
Linearity: ± 5%
Total resistance tolerance: ± 20%
Rotational cycles: 50,000
Mechanical rotation: 300° ± 5°
10,54 [0.415]
8,13 [0.32]
21,09 ± 0,13
[0.83 ± 0.005]
3,96 [0.156]
8,71 [0.343]
PC Terminals
Type C-30
3,96 [0.156] 9,22[0.363]
Type “C” Mtg.
With Bracket
OPTIONS
Flatted Shaft
RESISTANCE TAPER REFERENCE
1 kOhm Linear 574SX1M48F102SD
10 kOhm Linear 574SX1M48F103SD
100 kOhm Linear 574SX1M48F104SD
50 kOhm Linear 574SX1M48F503SD
Slotted Shaft
RESISTANCE TAPER REFERENCE
1 kOhm Linear 574SX1M48S102SD
10 kOhm Linear 574SX1M48S103SD
100 kOhm Linear 574SX1M48S104SD
50 kOhm Linear 574SX1M48S503SD
Clarostat Rotary Potentiometers and Position Transducers
107
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
590 Series, Commercial potentiometer
The 590 Series conductive plastic modular potentiometer features low
electrical noise, smooth feel, robust construction, and brass bushing and
shaft. Terminals are PC style. Hardware included. Multiple sections(up to
three) are available on special order.
Power rating: 0.5 W @ 70 °C (158 °F)
Element type: Conductive plastic
Terminal type: PC, 6,35 mm (0.25 in) long
Bushing: 6,35 mm (0.25 in) Ø x 6,35 mm (0.25 in) L
Shaft: Slotted, 3,17 mm (0.125 in) Ø x 22,23 mm (0.875 in) L
Body: 12,7 mm (0.50 in) Ø
Electrical taper: Linear
Operating temperature: -40 °C to 120 °C (-40 °F to 248 °F)
Linearity: ± 5%
Total resistance tolerance: ± 10% (up to 500 kOhms)
± 20 % (1 MOhm and over)
Rotational cycles: 50,000
Mechanical rotation: 295° ± 5°
OPTIONS
Slotted Shaft
RESISTANCE TAPER REFERENCE
100 Ohm Linear 590SX1N56S101SP
500 Ohm Linear 590SX1N56S501SP
1 kOhm Linear 590SX1N56S102SP
5 kOhm Linear 590SX1N56S502SP
10 kOhm Linear 590SX1N56S103SP
100 kOhm Linear 590SX1N56S104SP
500 kOhm Linear 590SX1N56S504SP
1 MOhm Linear 590SX1N56S105SP
575 Series, Commercial potentiometer
The 575 Series conductive plastic potentiometer offers a smooth feel and
robust construction, with a thermoplastic housing, bushing, and shaft.
Terminals are solder-hook style for panel mounting. No hardware is included.
Power rating: 0.5 W @ 70 °C (158 °F)
Element type: Conductive plastic
Terminal type: Solder hook-200 grid
Bushing: 9,52 mm (.375 in) D x 6,35 mm (0.25 in) L
Shaft: 6,35 mm (0.25 in) Ø x 19,05 mm (0.75 in) L
Body: 21,08 mm (0.830 in) square
Electrical taper: Linear
Operating temperature: -40 °C to 120 °C (-40 °F to 248 °F)
Working voltage: 350 Vac
Linearity: ± 5%
Total resisteance tolerance: ± 20%
Rotational cycles: 50,000
Mechanical rotation: 300° ± 5°
OPTIONS
Flatted Shaft
RESISTANCE TAPER REFERENCE
1 kOhm Linear 575SX1A48F102SS
10 kOhm Linear 575SX1A48F103SS
50 kOhm Linear 575SX1A48F503SS
Slotted Shaft
RESISTANCE TAPER REFERENCE
1 kOhm Linear 575SX1A48S102SS
10 kOhm Linear 574SX1A48S103SS
50 kOhm Linear 574SX1A48S503SS
108 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
380 Series, Industrial potentiometer
The 380 Series “Quiet One” is a 2-watt conductive plastic potentiometer
offering superior dynamic noise and a long rotational life. It meets MIL-R-94
specifications where applicable.
Approvals: MIL-R-94
Power rating: 2.0 W max.
Element type: Conductive plastic
Terminal type: Solder lug
Shaft: Slotted
Body: 27,79 mm (1.094 in) Ø
Electrical taper: Linear
Operating temperature: -55 °C to 120 °C (-67 °F to 248 °F)
Working voltage: 500 Vdc
Linearity: ± 5%
Total resistance tolerance: ± 10% (up to 500 kOhms)
± 20 % (1 MOhm and over)
Rotational cycles: 100,000
Mechanical rotation: 312° ± 3°
OPTIONS
C1: 2.0 in (50,8 mm) Round Shaft;
0.375 in (9,5 mm) L bushing
50,8
[
2.0
]6,35
[
.025
]
27,78
[
1.09
]
14,27
[
0.56
]
C1
RESISTANCE REFERENCE
100 Ohm 380C1100
250 Ohm 380C1250
500 Ohm 380C1500
1 kOhm 380C11000
1.5 kOhm 380C11500
2 kOhm 380C12000
2.5 kOhm 380C12500
5 kOhm 380C15000
10 kOhm 380C110K
15 kOhm 380C115K
20 kOhm 380C120K
25 kOhm 380C125K
50 kOhm 380C150K
100 kOhm 380C1100K
200 kOhm 380C1200K
250 kOhm 380C1250K
500 kOhm 380C1500K
1 MOhm 380C11MEG
C2: 0.625 in (15,88 mm) screwdriver slotted shaft;
0.5 in (12,7 mm) L locking bushing
C2
27,78
[
1.09
]
14,27
[
0.56
]15,87
[
0.625
]
RESISTANCE REFERENCE
250 Ohm 380C2250
1 kOhm 380C21000
5 kOhm 380C25000
10 kOhm 380C210K
25 kOhm 380C225K
50 kOhm 380C250K
100 kOhm 380C2100K
250 kOhm 380C2250K
1 MOhm 380C21MEG
C3: 0.875 in (22,23 mm) shaft;
0.375 in (9,5 mm) L bushing
14,27
[0.56
]
C3
27,78
[
1.09
]
22,23
[
0.875
]
RESISTANCE REFERENCE
100 Ohm 380C3100
250 Ohm 380C3250
500 Ohm 380C3500
1 kOhm 380C31000
2 kOhm 380C32000
2.5 kOhm 380C32500
5 kOhm 380C35000
10 kOhm 380C3310K
25 kOhm 380C325K
50 kOhm 380C350K
100 kOhm 380C3100K
150 kOhm 380C3150K
200 kOhm 380C3200K
250 kOhm 380C3250K
500 kOhm 380C3500K
1 MOhm 380C31MEG
5 MOhm 380C35MEG
Clarostat Rotary Potentiometers and Position Transducers (continued)
109
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
RV4 MIL Series potentiometer
The RV4 is a dual-marked potentiometer with all the fine features of the
380 Series in a more economical package. It is built in strict accordance with
MIL-R-94.
Approvals: MIL-R-94
Power rating: 2.0 W max.
Element type: Conductive plastic
Terminal type: Solder lug
Shaft: Slotted
Body: 27,79 mm (1.094 in) Ø
Electrical taper: Linear
Operating temperature: -55 °C to 120 °C (-67 °F to 248 °F)
Working voltage: 500 Vdc
Linearity: ± 5%
Rotational cycles: 25,000
Mechanical rotation: 312° ± 3°
OPTIONS
Standard Bushing,
0.875 in (22,23 mm) shaft length
RESISTANCE TOLERANCE REFERENCE
100 Ohm ± 10% RV4NAYSD101A
250 Ohm ± 10% RV4NAYSD251A
500 Ohm ± 10% RV4NAYSD501A
1 kOhm ± 10% RV4NAYSD102A
2.5 kOhm ± 10% RV4NAYSD252A
5 kOhm ± 10% RV4NAYSD502A
10 kOhm ± 10% RV4NAYSD103A
25 kOhm ± 10% RV4NAYSD253A
50 kOhm ± 10% RV4NAYSD503A
100 kOhm ± 10% RV4NAYSD104A
250 kOhm ± 10% RV4NAYSD254A
500 kOhm ± 10% RV4NAYSD504A
750 Kohm ± 10% RV4NAYSD754A
1 MOhm ± 10% RV4NAYSD105A
5 MOhm ± 20% RV4NAYSD505B
Locking Bushing
RESISTANCE TOLERANCE REFERENCE
100 Ohm ± 10% RV4LAYSA101A
250 Ohm ± 10% RV4LAYSA251A
500 Ohm ± 10% RV4LAYSA501A
1 kOhm ± 10% RV4LAYSA102A
2.5 kOhm ± 10% RV4LAYSA252A
5 kOhm ± 10% RV4LAYSA502A
10 kOhm ± 10% RV4LAYSA103A
25 kOhm ± 10% RV4LAYSA253A
50 kOhm ± 10% RV4LAYSA503A
100 kOhm ± 10% RV4LAYSA104A
250 kOhm ± 10% RV4LAYSA254A
500 kOhm ± 10% RV4LAYSA504A
750 kOhm ± 10% RV4LAYSA754A
1 MOhm ± 10% RV4LAYSA105A
5 MOhm ± 20% RV4LAYSA505B
110 www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
RV6/392M MIL Series potentiometer
RV6/392M Series are economical potentiometers designed to meet wave
soldering applications for mounting PC boards. They meet flow solderability
and washability test requirements, and MIL-R-94 standard apply.
Approvals: MIL-R-94
Power rating: 0.5 W max.
Element type: Conductive plastic
Terminal type: Solder hook
Shaft: Slotted
Body: 12,7 mm (0.5 in) Ø
Electrical taper: Linear
Operating temperature: -40 °C to 120 °C (-40 °F to 248 °F)
Working voltage: 350 Vdc
Linearity: ± 5%
Total resistance tolerance: ± 10% (up to 500 kOhms)
± 20 % (1 MOhm and over)
Rotational cycles: 50,000
Mechanical rotation: 295° ± 5°
RV6/392M
Locking Bushing Type
15,88 ± 0,76
[0.625 ± 0.03]
12,7 ± 0,5
[0.5 ± 0.02] 3,18
[0.125] Dia.
12,7 [0.5]
Dia.
Type Bushing
Length
Shaft
Length
RV6 6,35
0.25 22,23
0.875
Clarostat Rotary Potentiometers and Position Transducers (continued)
OPTIONS
Standard Bushing, 6,35 mm (0.25 in) L;
0.875 in (22,23 mm) shaft length
RESISTANCE REFERENCE
100 Ohm RV6NAYSD101A
250 Ohm RV6NAYSD251A
500 Ohm RV6NAYSD501A
1 kOhm RV6NAYSD102A
2.5 kOhm RV6NAYSD252A
5 kOhm RV6NAYSD502A
10 kOhm RV6NAYSD103A
25 kOhm RV6NAYSD253A
50 kOhm RV6NAYSD503A
100 kOhm RV6NAYSD104A
250 kOhm RV6NAYSD254A
500 kOhm RV6NAYSD504A
1 MOhm RV6NAYSD105A
Locking Bushing, 12,7 mm (0.50 in) L;
0.625 in (15,88 mm) shaft length
RESISTANCE REFERENCE
100 Ohm RV6LAYSA101A
250 Ohm RV6LAYSA251A
500 Ohm RV6LAYSA501A
1 kOhm RV6LAYSA102A
2.5 kOhm RV6LAYSA252A
5 kOhm RV6LAYSA502A
10 kOhm RV6LAYSA103A
25 kOhm RV6LAYSA253A
50 kOhm RV6LAYSA503A
100 kOhm RV6LAYSA104A
250 kOhm RV6LAYSA254A
500 kOhm RV6LAYSA504A
1 MOhm RV6LAYSA105A
111
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
53 Series potentiometer
The 53 Series has all the fine features of the Series 380 in a more economical
package. It is available with a 50,8 mm [2.0 in] long shaft.
Power rating: 2.0 W max.
Element type: Conductive plastic
Terminal type: Solder lug
Shaft: Slotted, 50,8 mm (2.0 in) L
Body: 27,79 mm (1.094 in) Ø
Electrical taper: Linear
Operating temperature: -55 °C to 120 °C (-67 °F to 248 °F)
Working voltage: 500 Vdc
Linearity: ± 5%
Rotational cycles: 25,000
Mechanical rotation: 312° ± 3°
OPTIONS
Standard Bushing, 2.0 in (50,8 mm) shaft length
RESISTANCE TOLERANCE REFERENCE
100 Ohm ± 10% 53C1100
250 Ohm ± 10% 53C1250
500 Ohm ± 10% 53C1500
1 kOhm ± 10% 53C11K
2.5 kOhm ± 10% 53C12500
5 kOhm ± 10% 53C15K
10 kOhm ± 10% 53C110K
25 kOhm ± 10% 53C125K
50 kOhm ± 10% 53C150K
100 kOhm ± 10% 53C1100K
150 kOhm ± 10% 53C1150K
250 kOhm ± 10% 53C1250K
500 kOhm ± 10% 53C1500K
750 kOhm ± 10% 53C1750K
1 MOhm ± 20% 53C11MEG
2.5 MOhm ± 20% 53C12.5MEG
5 MOhm ± 20% 53C15MEG
585 Series, Commercial potentiometer
Our Series 585 offers a robust construction in a low-cost commercial
package, using carbon composition elements and a metal shaft and bushing.
Power rating: 0.05 W max. @ 40 °C
Element type: Carbon composition
Terminal type: 3 in-line
Bushing: M 7 x 0.75 thread, 7 mm L
Shaft: 6,0 mm (0.24 in) Ø by 25,0 mm (0.98 in) L
Flatted shaft: 12,0 mm (0.47 in) long by 4,5 mm (0.18 in) D standard; round
end available
Body: 9,5 mm (0.37 in) square
Operating temperature: -55 °C to 120 °C (-67 °F to 248 °F)
Resistance tolerance: ± 20%
Rotational cycles: 10,000
Mechanical rotation: 300°
OPTIONS
Linear taper
RESISTANCE SECTION REFERENCE
1 kOhm Single 585SX4Q25F102SP
5 kOhm Single 585SX4Q25F502SP
10 kOhm Single 585SX4Q25F103SP
1 kOhm Double 585DX4Q25F102SP
5 kOhm Double 585DX4Q25F502SP
10 kOhm Double 585DX4Q25F103SP
Audio taper
RESISTANCE SECTION REFERENCE
1 kOhm Single 585SX4Q25F102ZP
5 kOhm Single 585SX4Q25F502ZP
10 kOhm Single 585SX4Q25F103ZP
