BOARD/WIRE-TO-BOARD CONNECTORS Minitek(R) Pwr Hybrid 3.0 OVERVIEW Minitek(R) Pwr Hybrid 3.0 connectors are designed for power and signal application with current rating up to 5A per circuit, available for dual row and 2 to 24 power circuits, and 2 to 12 signal for Wire-to-Board application. Crimp, snap-in receptacle contacts are used to terminate AWG 20-30 wires. Receptacle housings allow Wire-to-Board configurations. Crimping and removal tools are available for wire harness assembly. Board mounted vertical header supports Wire-to-Board interconnections. Wave soldering headers are available in through-hole configuration. Features Benefits * Separated power and signal contacts * Provide power contacts for power distribution and signal contacts for power control * Flexible modular design * Number and placement of power and signal contacts are highly configurable for customer power needs * Flexible design with signal pin * Backward mateable with traditional 3.0mm power connector if signal pin is absent * Signal contact in 2mm pitch and power contact in 3mm pitch * Compact size design and clear identification for cable harness termination * Power pin is separated by signal pin in center position * Better heat dissipation, hence better current rating capability * Positive locking and housing with low thumb latch operation * Prevents unexpected unmating * Signal pin with lower insertion and extraction force than power pin * Relatively easy to mate and un-mate compared to the similarly configured traditional 3.0mm power connector * High retention force for terminal within housing * Well secures terminal in housings * Available in UL94V-0 flammability rated LCP * High flammability rating * RoHS compliance and Lead free * Meet environmental, health and safety requirements Minitek(R) Pwr Hybrid 3.0 TECHNICAL INFORMATION MATERIALS SPECIFICATIONS * Power Contact for Board Header: Brass with Tin, optional Au and GXTTM plating * Product Specification: GS-12-XXXX* * Signal Contacts for Header and Receptacle: Phosphorus with optional Au and GXTTM plating * Power Terminal for Crimping: Brass/Phosphorus with Tin, optional Au and GXTTM plating * Housing: Nylon 66, UL94V-0 * Package Specification: GS-14-XXXX* * Application Specification: GS-20-XXXX* * Please contact product manager for more information APPROVALS AND CERTIFICATIONS * UL/CSA pending ELECTRICAL PERFORMANCES TARGET MARKET/ APPLICATIONS * Low Lever Contact Resistance: 20m max. * Consumer * Insulation Resistance: 1000M min. * Household Appliances * Voltage Rating for Power Contacts: 250Vrms * Current Rating for Power Contacts: Up to 5A/contact * Current Rating for Signal Contacts: Up to 1A/contact * Dielectric Withstand Voltage for Power: 1000 VAC * Dielectric Withstand Voltage for Signal: 650 VAC * Temperature Rise: 30C max. * Industrial & Instrumentation * Multi-service Station * Display System * Chemical Detection System * Data * Power Supply Unit ENVIRONMENTAL * Fan * Operating Temperature: -40C to +105C * Rack-Mount * Include 30C terminal temperature rise at rated current * Interface Converter Mechanical PERFORMANCE * HDD Application * Communications * Terminal Insertion Force: 8.0N max. * Generic Telecom Box * Terminal Withdrawal Force: 3.7N min. * Customer Premises Equipment * Durability: 30 cycles Description Part Number PCB Header Vertical, Through-Hole 10129811 Receptacle Housing 10129812 Receptacle Terminal for Power 10129814 Receptacle Terminal for Signal 10044403 For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. BWBMPHYB301115EA4 part numbers