Minitek® Pwr Hybrid 3.0
OVERVIEW
Minitek® Pwr Hybrid 3.0 connectors are designed for power
and signal application with current rating up to 5A per
circuit, available for dual row and 2 to 24 power circuits,
and 2 to 12 signal for Wire-to-Board application.
Crimp, snap-in receptacle contacts are used to terminate
AWG 20-30 wires. Receptacle housings allow Wire-to-Board
configurations. Crimping and removal tools are available
for wire harness assembly. Board mounted vertical header
supports Wire-to-Board interconnections. Wave soldering
headers are available in through-hole configuration.
BOARD/WIRE-TO-BOARD
CONNECTORS
FEATuRES BENEFITS
• Separated power and signal contacts • Provide power contacts for power distribution and signal
contacts for power control
• Flexible modular design • Number and placement of power and signal contacts are
highly configurable for customer power needs
• Flexible design with signal pin • Backward mateable with traditional 3.0mm power
connector if signal pin is absent
• Signal contact in 2mm pitch and power contact in
3mm pitch
• Compact size design and clear identification for cable
harness termination
• Power pin is separated by signal pin in center position • Better heat dissipation, hence better current rating
capability
• Positive locking and housing with low thumb latch
operation
• Prevents unexpected unmating
• Signal pin with lower insertion and extraction force
than power pin
• Relatively easy to mate and un-mate compared to the
similarly configured traditional 3.0mm power connector
• High retention force for terminal within housing • Well secures terminal in housings
• Available in UL94V-0 flammability rated LCP • High flammability rating
• RoHS compliance and Lead free • Meet environmental, health and safety requirements
Minitek® Pwr Hybrid 3.0
For more information,
please contact: Communications@fci.com
or visit us at www.fci.com
Disclaimer
Please note that the above information is subject to change without notice.
TECHNICAL INFORMATION
MATERIALS
• Power Contact for Board Header: Brass with Tin, optional
Au and GXT™ plating
• Signal Contacts for Header and Receptacle: Phosphorus
with optional Au and GXT™ plating
• Power Terminal for Crimping: Brass/Phosphorus with Tin,
optional Au and GXT™ plating
• Housing: Nylon 66, UL94V-0
ELECTRICAL PERFORMANCES
• Low Lever Contact Resistance: 20mΩ max.
• Insulation Resistance: 1000MΩ min.
• Voltage Rating for Power Contacts: 250Vrms
• Current Rating for Power Contacts: Up to 5A/contact
• Current Rating for Signal Contacts: Up to 1A/contact
• Dielectric Withstand Voltage for Power: 1000 VAC
• Dielectric Withstand Voltage for Signal: 650 VAC
• Temperature Rise: 30ºC max.
ENVIRONMENTAL
• Operating Temperature: -40ºC to +105ºC
• Include 30ºC terminal temperature rise at rated current
MECHANICAL PERFORMANCE
• Terminal Insertion Force: 8.0N max.
• Terminal Withdrawal Force: 3.7N min.
• Durability: 30 cycles
SPECIFICATIONS
• Product Specification: GS-12-XXXX*
• Package Specification: GS-14-XXXX*
• Application Specification: GS-20-XXXX*
* Please contact product manager for more information
APPROVALS AND CERTIFICATIONS
• UL/CSA pending
TARGET MARKET/ APPLICATIONS
• Consumer
•HouseholdAppliances
• Industrial & Instrumentation
•Multi-serviceStation
•DisplaySystem
•ChemicalDetectionSystem
• Data
•PowerSupplyUnit
•Fan
•Rack-Mount
•InterfaceConverter
•HDDApplication
• Communications
•GenericTelecomBox
•CustomerPremisesEquipment
PART NuMBERS
Description Part
Number
PCB Header Vertical, Through-Hole 10129811
Receptacle Housing 10129812
Receptacle Terminal for Power 10129814
Receptacle Terminal for Signal 10044403
BWBMPHYB301115EA4
