1
Fuseholder FUS
https://www.schurter.com /PG02
Circuit Protection
Shock-Safe Fuseholder, 5 x 20 / 6.3 x 32 mm, Slotted Cap / Fingergrip, Snap-in stepless
Shock-Safe Fuseholder
Socket with Fingergrip Cap
Shock-Safe Fuseholder
Socket with Slotted Cap
See below:
Approvals and Compliances
500 VAC · 4 W / 16 A (VDE) · 600 VAC/VDC · 32 A (UL/CSA)
Description
- Fuseholder for 600 VAC applications
- Fuseholder with high rated power acceptance
- Screw type fuse carrier
Unique Selling Proposition
- Fuseholder for high performance applications
- High protection class IP67
- Easy, stepless snap-in mounting
Applications
- Equipment with three-phase supply (400 VAC)
- Applications with rated current up to 16 A (VDE)
Weblinks
pdf data sheet, html datasheet, General Product Information, Packaging
details, Distributor-Stock-Check, Accessories, Detailed request for
product, Microsite
Technical Data
Shock-Safe Category PC2
Fuse-Link 5 x 20 or 6.3 x 32 mm
Mounting Panel mount, Front Side
Attachment Snap-in
Terminal Solder or Quick-Connect 6.3 x 0.8 mm
Rated Voltage 500 VAC (VDE), 600 VAC/VDC (UL/CSA)
Rated current 16 A (VDE), 32 A (UL/CSA)
Rated Power Acceptance IEC 4 W / 16 A @ Ta 23 °C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Degree of Protection IP 67
Protection Class Suitable for appliances with protection
class I or II acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, black, UL 94V-0
Material: Terminals Tin-Plated Copper
Unit Weight 36.1 g / 39.4 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Rated Voltage, Power Rating,
Rated current, Certification marks
Soldering Methods Iron
Soldering Profile
Solderability 350 °C / 3 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20
Contact Resistance ≤ 10 mΩ at 100 mA acc. to IEC
60127-6
Dielectric Strength > 3 kV between life parts
(50 Hz: 1 min)
Impulse Withstand Voltage > 4 kV between life parts
Insulation Resistance ≥ 10 MΩ between life parts
(500 VDC: 1 min)
Overvoltage Category III acc. to IEC 60664-1
Pollution Degree 3 acc. to IEC 60664-1
Resistance to Vibration acc. to IEC 60068-2-6, test Fc
Panel Thickness 1.0 - 3.0 mm
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
2
Fuseholder
FUS https://www.schurter.com /PG02
Circuit Protection
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: FUS
Approval Logo Certificates Certification Body Description
VDE Approvals VDE VDE Certificate Number: 40044384
UL Approvals UL UL File Number: E39328
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to UL 4248-1 Fuseholder general requirements
Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Dimension [mm] 70.6 mm
4.3
70.6
ø28.2
12.9
8.5
2.2
4.3
63.2
ø
28.2
8.5
1.8
3
Fuseholder FUS
https://www.schurter.com /PG02
Circuit Protection
18.7-0.1
-0.1
0
0
19.3
Plate thickness 1mm
-0.1
-0.1
0
0
18.7
19.5
Plate thickness 1.5, 2.0, 3.0mm
Derating Curves
Admissible Power Acceptance in Watt
020406080 100
0.5
0.0
I = << In
I = 0.7 In
I = 1.0 In
4.0
1.5
1.0
2.0
3.0
2.5
3.5
Ambient Air Temperature Ta °C
All Variants
Holder Cap Fuse-Link Terminal Degree of Pro-
tection
Order Number
lslotted 5 x 20mm Quick-Connect 6.3 x 0.8 mm IP67 0031.9156 █
lslotted 6.3 x 32mm Quick-Connect 6.3 x 0.8 mm IP67 0031.9157 █
lFingergrip 5 x 20mm Quick-Connect 6.3 x 0.8 mm IP67 0031.9158 █
lFingergrip 6.3 x 32mm Quick-Connect 6.3 x 0.8 mm IP67 0031.9159 █
lslotted 5 x 20mm Solder IP67 0031.9160 █
lslotted 6.3 x 32mm Solder IP67 0031.9161 █
lFingergrip 5 x 20mm Solder IP67 0031.9162 █
lFingergrip 6.3 x 32mm Solder IP67 0031.9163 █
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging Unit Bulk (25 pcs.)
Accessories
Description
Cover FIZ, FUL
Insulation Cover for FIZ, FUL,FUS
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
17.08.2020
