FIT-221-3/64 BK059 - ALPHA WIRE

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. FIT-221-3/64

Construction

1) Tubing Type Heat Shrinkable Tubing

2) Tubing Material Cross Linked Polyolefin

3) Minimum Supplied ID(In) 0.046

4) Maximum Recovered ID (In) 0.023

5) Nominal Recovered Wall Thickness(In) 0.016

6) Color(s) BLACK, WHITE, CLEAR, RED, YELLOW, BLUE, GREEN

Applicable Specifications

1) UL Standard 224 (Except Clear)

2) CSA International Standard 198 (Except Clear)

3) Other AMS-DTL-23053/5 Class 1 (Except Clear)

AMS-DTL-23053/5 Class 2 (Clear Only)

Environmental

1) EU Directive 2002/95/EC(RoHS):

All materials used in the manufacture of this part are in compliance with EU Directive

2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and

electronic equipment. Consult Alpha Wire's web site for compliance Date of Manufacture.

2) REACH Regulation (EC 1907/2006):

All materials used in the manufacture of this part do not appear on the EU REACH Substance of

Very High Concern (SVHC) candiate list.

3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the requirements of

California Proposition 65.

Properties

Physical &Mechanical Properties

1) Temperature Range -55 to 135°C

2) Shrink Ratio Approximately 2:1

3) Full Recovery Temperature 121°C

4) Minimum Shrink Temperature 90°C

5) Tensile Strength 1500psi, Min ASTM D638

6) Elongation 200%, Min ASTM D638

7) Low Temperature Flex(-55°C) no cracking AMS-DTL-23053

8) Heat Shock(250°C,4hrs) no cracking AMS-DTL-23053

9) Secant Modulus 2.5x10 4 psi, Min ASTM D882

10) Longitudinal Change +/-5% AMS-DTL-23053

11) Specific Gravity(Colors) 1.35, Max ASTM D792

Specific Gravity(Clear) 1.00, Max

12) Shelf Life 5 Years @ 18 to 35°C

Electrical Properties

1) Dielectric Strength 500 V/mil, Min ASTM D876

2) Volume Resistivity 1x10 14 ohm-cm, Min ASTM D876

Chemical Properties

1) Water Absorption 0.50%, Max ASTM D570

2) Corrosion(0°C,16hrs) no corrosion AMS-DTL-23053

3) Fluid Resistance(23°C,24 Hrs) 1000 PSI, Min AMS-DTL-23053

4) Fungus Resistance Pass AMS-DTL-23053

5) Vacuum Outgassing - CVCM 0.10%, Max ASTM E595

6) Halogen Free No

7) Lead Free Yes

Other

Packaging

www.alphawire.com

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,

even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out

of or in connection with the use, or inability to use, the information or specifications described herein.

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

RoHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number:FIT-221-3/64

FIT-221-3/64 , RoHS-Compliant Commencing With12/1/2004Production

This document certifies that the Alpha part numbers cited above are manufactured in accordance with Directive 2002/95/EC of the European

Parliament and of the Council of 27 January 2003, better known as the RoHS Directives, with regards to restrictions of the use of certain hazardous

substances used in the manufacture of electrical and electronic equipment. The reader is referred to these Directives for the specific definitions and

extents of these Directives. No Exemptions are required for RoHS Compliance on this item.

Substance Maximum Control Value

Lead 0.1% by weight (1000 ppm)

Mercury 0.1% by weight (1000 ppm)

Cadmium 0.1% by weight (100 ppm)

Hexavalent Chromium 0.1% by weight (1000 ppm)

Polybrominated Biphenyls (PBB)

Polybrominated Diphenyl Ethers (PBDE) 0.1% by weight (1000 ppm)

Including Deca-BDE 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its

release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or

the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is

for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual

usage of the product.

Authorized Signatory for the Alpha Wire Company:

Dave Watson, Director of Engineering &QA 1/23/2011