Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Sxx08xSx & Sxx08x Series (R) Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microAmps of current as furnished by sense coils, proximity switches, and microprocessors. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits * RoHS compliant * Glass - passivated junctions Agency Approval Agency Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Main Features Symbol IT(RMS) VDRM /VRRM IGT * Surge capability up to 100 A Applications Agency File Number L Package: E71639 (R) * Voltage capability up to 1000 V Value Unit 8 A 400 to 1000 V 0.2 to 15 mA Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol A K G Sxx08xSx & Sxx08x Series 229 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Absolute Maximum Ratings -- Sensitive SCRs Symbol Parameter IT(RMS) IT(AV) Test Conditions Sxx08LSy TC = 80C RMS on-state current Sxx08RSy Sxx08DSy Sxx08VSy TC = 95C Sxx08LSy TC = 80C Average on-state current Sxx08RSy Sxx08DSy Sxx08VSy TC = 95C Value Unit 8 A 5.1 A single half cycle; f = 50Hz; TJ (initial) = 25C 83 single half cycle; f = 60Hz; TJ (initial) = 25C 100 41 A2s ITSM Peak non-repetitive surge current I2t I2t Value for fusing tp = 8.3 ms A di/dt Critical rate of rise of on-state current f = 60 Hz ; TJ = 110C 70 A/s IGTM Peak gate current TJ = 110C 1.6 A PG(AV) Average gate power dissipation TJ = 110C 0.4 W Storage temperature range -40 to 150 C Operating junction temperature range -40 to 110 C Value Unit 8 A 5.1 A Tstg TJ Note: xx = voltage, y = sensitivity Absolute Maximum Ratings -- Standard SCRs Symbol IT(RMS) IT(AV) Parameter Test Conditions RMS on-state current Average on-state current Sxx08L TC = 100C Sxx08R Sxx08D Sxx08V TC = 110C Sxx08L TC = 100C Sxx08R Sxx08D Sxx08V TC = 110C single half cycle; f = 50Hz; TJ (initial) = 25C 83 single half cycle; f = 60Hz; TJ (initial) = 25C 100 ITSM Peak non-repetitive surge current I2t I2t Value for fusing tp = 8.3 ms 41 A2s Critical rate-of-rise of on-state current di/dt IGM PG(AV) Tstg TJ A f = 60 Hz TJ = 125C 100 A/s Peak gate current TJ = 125C 2 A Average gate power dissipation TJ = 125C 0.5 W Storage temperature range -40 to 150 C Operating junction temperature range -40 to 125 C Note: xx = voltage Sxx08xSx & Sxx08x Series 230 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Electrical Characteristics (TJ = 25C, unless otherwise specified) - Sensitive SCRs Symbol IGT VGT Value Test Conditions Sxx08xS2 MAX. VD = 6V RL = 100 200 MAX. Unit Sxx08xS3 500 A 0.8 V dv/dt VD = VDRM; RGK = 1k; TJ = 110C TYP. 8 V/s VGD VD = VDRM RL = 3.3 k TJ = 110C MIN. 0.2 V VGRM IGR = 10A MIN. 6 V IH IT = 20mA (initial) MAX. 6 8 tq IT=2A; tp=50s; dv/dt=5V/s; di/dt=-30A/s MAX. 50 45 s tgt IG = 2 x IGT PW = 15s IT = 12A TYP. 4 5 s mA Note: xx = voltage x = package Electrical Characteristics (TJ = 25C, unless otherwise specified) - Standard SCRs Symbol IGT VGT Test Conditions MAX. VD = 12V RL = 60 MAX. VD = VDRM; gate open; TJ = 100C mA V 350 600V 300 250 MIN. 1000V 400V VD = VDRM; gate open; TJ = 125C Unit 1.5 400V 800V dv/dt Value Sxx08x 15 100 V/s 250 600V 225 800V 200 VGD VD = VDRM RL = 3.3 k TJ = 125C MIN. 0.2 V IH IT = 200mA (initial) MAX. 30 mA tq IT=2A; tp=50s; dv/dt=5V/s; di/dt=-30A/s MAX. 35 s tgt IG = 2 x IGT PW = 15s IT = 16A TYP. 2 s Note: xx = voltage x = package Static Characteristics Symbol Test Conditions IT = 16A; tp = 380 s VTM Sxx08xyy IDRM / IRRM Sxx08x Unit 1.6 V TJ = 25C 400 - 600V 5 TJ = 110C 400 - 600V 250 400 - 800V 10 TJ = 25C VDRM = VRRM MAX. Value TJ = 100C TJ = 125C MAX. 1000V 20 400 - 800V 200 1000V 3000 400 - 800V 500 Note: xx = voltage, x = package, yy = sensitivity Sxx08xSx & Sxx08x Series 231 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. A Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Thermal Resistances Symbol Parameter Value Junction to case (AC) R(J-C) Junction to ambient R(J-A) Sxx08RSy 1.8 Sxx08LSy 3.4 Sxx08VSy 2.1 Sxx08DSy 1.5 Sxx08R 1.8 Sxx08L 3.4 Sxx08V 2.0 Sxx08D 1.5 Sxx08RSy 40 Sxx08LSy 65 Sxx08VSy 85 Sxx08R 40 Sxx08L 50 Sxx08V 70 Unit C/W C/W Note: xx = voltage, y = sensitivity Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature (Sensitive SCR) Figure 2: Normalized DC Gate Trigger Current vs. Junction Temperature (Standard SCR) 4.0 Ratio of IGT / IGT (TJ = 25C) Ratio of IGT / IGT (TJ = 25C) 4.0 3.0 2.0 1.0 0.0 3.0 2.0 1.0 0.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) - (C) Sxx08xSx & Sxx08x Series -40 -15 10 35 60 85 Junction Temperature (TJ) - (C) 232 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 110 125 Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature Figure 4: Normalized DC Holding Current vs. Junction Temperature 2.0 Ratio of IH / IH (TJ = 25C) Ratio of VGT / VGT (TJ = 25C) 2.0 1.5 1.0 0.5 1.5 1.0 0.5 0.0 0.0 -40 -15 10 35 60 85 110 -40 125 -15 10 Junction Temperature (TJ) - (C) 60 85 110 125 Figure 6: Power Dissipation (Typical) vs. RMS On-State Current 8 32 TJ = 25C 28 Average On-State Power Dissipation [PD(AV)] -- (Watts) Instantaneous On-state Current (iT) - Amps Figure 5: On-State Current vs. On-State Voltage (Typical) 24 20 16 12 8 4 7 6 5 4 3 2 1 0 0 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 1.6 1 2 Instantaneous On-state Voltage (vT) - Volts 3 4 5 6 7 8 RMS On-State Current [IT(RMS)] - (Amps) Figure 7: Maximum Allowable Case Temperature vs. RMS On-State Current Figure 8: Maximum Allowable Case Temperature vs. Average On-State Current 130 130 120 Maximum Allowable Case Temperature (TC) - C Sxx08R Sxx08D Sxx08V 125 Maximum Allowable Case Temperature (TC) - C 35 Junction Temperature (TJ) - (C) Sxx08RSy Sxx08DSy Sxx08VSy 115 110 Sxx08L 105 100 95 Sxx08LSy CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive Conduction Angle: 180 FREE AIR RATING 90 85 80 0 1 2 3 4 5 6 7 8 9 RMS On-State Current [IT(RMS)] - Amps Sxx08xSx & Sxx08x Series Sxx08R Sxx08D Sxx08V 125 120 Sxx08RSy Sxx08DSy Sxx08VSy 115 110 Sxx08L 105 100 95 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive Conduction Angle: 180 FREE AIR RATING 90 85 80 0 1 2 Sx08LSy 3 4 Average On-State Current [IT(AVE)] - Amps 233 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 5 Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Figure 9: Maximum Allowable Ambient Temperature vs. RMS On-State Current 120 Maximum Allowable Ambient Temperature (TA) - C Maximum Allowable Ambient Temperature (TA) - C 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING Sxx08R 100 80 60 Sxx08V 40 Sxx08VSy 20 0 0.0 0.5 1.0 1.5 2.0 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING Sxx08R 100 Sxx08L Sxx08RSy Sxx08LSy Figure 10: Maximum Allowable Ambient Temperature vs. Average On-State Current Sxx08L 80 Sxx08V Sxx08RSy 60 Sxx08LSy 40 Sxx08VSy 20 0 2.5 0.0 0.5 1.0 1.5 Average On-State Current [IT(AVE)] - Amps RMS On-State Current [IT(RMS)] - Amps Note: xx = voltage, y = sensitivity Figure 11: Peak Capacitor Discharge Current Figure 12: Peak Capacitor Discharge Current Derating 1.2 1.0 Normalized Peak Current Peak Discharge Current (ITM) - Amps 1000 100 ITRM 0.8 0.6 0.4 Sensitive SCR Standard SCR 0.2 tW 10 0.5 1 . 0 1 0 .0 50.0 0.0 Pulse Current Duration (tw) - ms 0 25 50 75 100 125 Case Temperature (TC) - C Figure 13: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive)On-state Current (ITSM) - Amps 100 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration -- Full Cycles Sxx08xSx & Sxx08x Series 234 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 150 Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Soldering Parameters Pb - Free assembly Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5C/second max TS(max) to TL - Ramp-up Rate 5C/second max Reflow - Temperature (TL) (Liquidus) 217C - Temperature (tL) 60 - 150 seconds Peak Temperature (TP) 260 Time within 5C of actual peak Temperature (tp) 20 - 40 seconds +0/-5 Ramp-up TL tL TS(max) Preheat TS(min) 25 5C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Physical Specifications tS time to peak temperature Time Environmental Specifications Test 100% Matte Tin-plated AC Blocking Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Temperature Cycling Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application's operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Sxx08xSx & Sxx08x Series Ramp-do Ramp-down C Ramp-down Rate Terminal Finish tP TP Temperature Reflow Condition 235 Revised: June 24, 2011 04:57 PM Thermal Shock Autoclave Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40C to +150C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150C 1008 hours; -40C MIL-STD-750, M-1056 10 cycles; 0C to 100C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Dimensions -- TO-220AB (R-Package) -- Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT AREA (REF.) 0.17 IN2 O A E Dimension 8.13 .320 P ANODE B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H CATHODE ANODE GATE K N Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M J Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max Dimensions -- TO-220AB (L-Package) -- Isolated Mounting Tab TC MEASURING POINT O A E P AREA (REF.) 0.17 IN2 Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H CATHODE ANODE GATE K J Sxx08xSx & Sxx08x Series N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 236 Revised: June 24, 2011 04:57 PM Inches Millimeters A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Dimensions -- TO-251AA (V/I-Package) -- V/I-PAK Through Hole TC MEASURING POINT E Anode H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C Cathode Anode GATE L F G I Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.044 0.050 1.02 1.11 1.27 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.01 1.12 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 Dimensions -- TO-252AA (D-Package) -- D-PAK Surface Mount Anode E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension 6.71 .264 B C P Q Cathode GATE F Anode 1.60 .063 1.80 .071 AREA : 0.040 IN 2 3 .118 G 4.60 .181 I O L K J H M N Sxx08xSx & Sxx08x Series 237 Revised: June 24, 2011 04:57 PM Millimeters Min Typ Max Min Typ Max A 0.040 0.043 0.050 1.02 1.09 1.27 B 0.235 0.243 0.245 5.97 6.16 6.22 C 0.106 0.108 0.113 2.69 2.74 2.87 A 5.34 .210 Inches D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.02 1.12 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0 0 5 0 0 5 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs Product Selector Part Number Sxx08RS2 Voltage 400V 600V X X 800V 1000V Gate Sensitivity Type Package 0.2mA Sensitive SCR TO-220R Sxx08LS2 X X 0.2mA Sensitive SCR TO-220L Sxx08VS2 X X 0.2mA Sensitive SCR TO-251 Sxx08DS2 X X 0.2mA Sensitive SCR TO-252 Sxx08RS3 X X 0.5mA Sensitive SCR TO-220R Sxx08LS3 X X 0.5mA Sensitive SCR TO-220L Sxx08VS3 X X 0.5mA Sensitive SCR TO-251 0.5mA Sensitive SCR TO-252 15mA Standard SCR TO-220R Sxx08DS3 X X Sxx08R X X X X Sxx08L X X X X 15mA Standard SCR TO-220L Sxx08V X X X X 15mA Standard SCR TO-251 Sxx08D X X X X 15mA Standard SCR TO-252 Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx08L/Ryy Sxx08L/Ryy 2.2 g Bulk 500 Sxx08L/RyyTP Sxx08L/Ryy 2.2 g Tube 500 (50 per tube) Sxx08DyyTP Sxx08Dyy 0.3 g Tube 750 (75 per tube) Sxx08DyyRP Sxx08Dyy 0.3 g Embossed Carrier 2500 Sxx08VyyTP Sxx08Vyy 0.4 g Tube 750 (75 per tube) Sxx08L/R Sxx08L/R 2.2 g Bulk 500 Sxx08L/RTP Sxx08L/R 2.2 g Tube 500 (50 per tube) Sxx08DTP Sxx08D 0.3 g Tube 750 (75 per tube) Sxx08DRP Sxx08D 0.3 g Embossed Carrier 2500 Sxx08VTP Sxx08V 0.4 g Tube 750 (75 per tube) Note: xx = Voltage; yy = Sensitivity Sxx08xSx & Sxx08x Series 238 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor(R) brand Thyristors 8 Amp Sensitive & Standard SCRs TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards * Cover tape 0.315 (8.0) XXXXXX Cathode DC XX 0.059 DIA (1.5) XXXXXX DC XX XXXXXX * Gate DC 0.524 (13.3) XX 0.63 (16.0) XXXXXX 0.157 (4.0) Anode 12.99 (330.0) 0.512 (13.0) Arbor Hole Diameter Dimensions are in inches (and millimeters). TO-202 Type 1 (F Package) 0.64 (16.3) TO-251AA - (V Package TO-252AA - (D Package Direction of Feed S6008F1 yxxxx (R) Part Numbering System Part Marking System (R) S 60 08 L S2 56 TO-251AA - (V Package) TO-252AA - (D Package) S6008F1 DEVICE TYPE S: SCR LEAD FORM DIMENSIONS xx: Lead Form Option yxxxx (R) PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated V: TO-251 (V/I-Pak) D: TO-252 (D-Pak) (R) S6008DS2 YMXXX SENSITIVITY & TYPE Sensitive SCR: S2: 200A S3: 500A Standard SCR: (blank): 15mA (R) CURRENT RATING 08: 8A YMLDD S6008RS2 VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V S6008RS2 YMXXX S6008LS2 (R) MY (R) S6008LS2 MY (R) Sxx08xSx & Sxx08x Series 239 Revised: June 24, 2011 04:57 PM (c)2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. S6008DS2 YMLDD TO-202 Type 1 (F Package)