229
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Sxx08xSx & Sxx08x Series
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Glass – passivated
junctions
• Voltage capability up
to 1000 V
• Surge capability up
to 100 A
Main Features
Symbol Value Unit
IT(RMS) 8 A
VDRM /VRRM 400 to 1000 V
IGT 0.2 to 15 mA
Schematic Symbol
Agency Approval
Agency Agency File Number
®L Package: E71639
Applications
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
®
AK
G
230
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Absolute Maximum Ratings — Standard SCRs
Symbol Parameter Test Conditions Value Unit
IT(RMS) RMS on-state current
Sxx08L TC = 100°C
8 A
Sxx08R
Sxx08D
Sxx08V
TC = 110°C
IT(AV) Average on-state current
Sxx08L TC = 100°C
5.1 A
Sxx08R
Sxx08D
Sxx08V
TC = 110°C
ITSM Peak non-repetitive surge current
single half cycle; f = 50Hz;
TJ (initial) = 25°C 83
A
single half cycle; f = 60Hz;
TJ (initial) = 25°C 100
I2t I2t Value for fusing tp = 8.3 ms 41 A2s
di/dt Critical rate-of-rise of on-state current f = 60 Hz TJ = 125°C 100 A/μs
IGM Peak gate current TJ = 125°C 2 A
PG(AV) Average gate power dissipation TJ = 125°C 0.5 W
Tstg Storage temperature range -40 to 150 °C
TJOperating junction temperature range -40 to 125 °C
Note: xx = voltage
Absolute Maximum Ratings — Sensitive SCRs
Symbol Parameter Test Conditions Value Unit
IT(RMS) RMS on-state current
Sxx08LSy TC = 80°C
8 A
Sxx08RSy
Sxx08DSy
Sxx08VSy
TC = 95°C
IT(AV) Average on-state current
Sxx08LSy TC = 80°C
5.1 A
Sxx08RSy
Sxx08DSy
Sxx08VSy
TC = 95°C
ITSM Peak non-repetitive surge current
single half cycle; f = 50Hz;
TJ (initial) = 25°C 83
A
single half cycle; f = 60Hz;
TJ (initial) = 25°C 100
I2t I2t Value for fusing tp = 8.3 ms 41 A2s
di/dt Critical rate of rise of on-state current f = 60 Hz ; TJ = 110°C 70 A/μs
IGTM Peak gate current TJ = 110°C 1. 6 A
PG(AV) Average gate power dissipation TJ = 110°C 0.4 W
Tstg Storage temperature range -40 to 150 °C
TJOperating junction temperature range -40 to 110 °C
Note: xx = voltage, y = sensitivity
231
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol Test Conditions Value Unit
Sxx08xS2 Sxx08xS3
IGT VD = 6V RL = 100 ΩMAX. 200 500 μA
VGT MAX. 0.8 V
dv/dt VD = VDRM; RGK = 1kΩ; TJ = 110°C TYP. 8 V/μs
VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C MIN. 0.2 V
VGRM IGR = 10μA MIN. 6 V
IHIT = 20mA (initial) MAX. 6 8 mA
tqIT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 50 45 μs
tgt IG = 2 x IGT PW = 15µs IT = 12A TYP. 4 5 μs
Note: xx = voltage x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
Symbol Test Conditions Value Unit
Sxx08x
IGT VD = 12V RL = 60 ΩMAX. 15 mA
VGT MAX. 1. 5 V
dv/dt
VD = VDRM; gate open; TJ = 100°C
400V
MIN.
350
V/μs
600V
300
800V
250
1000V
100
VD = VDRM; gate open; TJ = 125°C
400V
250
600V
225
800V
200
VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C MIN. 0.2 V
IHIT = 200mA (initial) MAX. 30 mA
tqIT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 35 μs
tgt IG = 2 x IGT PW = 15µs IT = 16A TYP. 2 μs
Note: xx = voltage x = package
Static Characteristics
Symbol Test Conditions Value Unit
VTM IT = 16A; tp = 380 µs MAX. 1. 6 V
IDRM / IRRM VDRM = VRRM
Sxx08xyy
TJ = 25°C 400 - 600V
MAX.
5
μA
TJ = 110°C 400 - 600V 250
Sxx08x
TJ = 25°C
400 - 800V 10
1000V 20
TJ = 100°C
400 - 800V 200
1000V 3000
TJ = 125°C 400 - 800V 500
Note: xx = voltage, x = package, yy = sensitivity
232
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Thermal Resistances
Symbol Parameter Value Unit
Rθ(J-C) Junction to case (AC)
Sxx08RSy 1. 8
°C/W
Sxx08LSy 3.4
Sxx08VSy 2.1
Sxx08DSy 1. 5
Sxx08R 1. 8
Sxx08L 3.4
Sxx08V 2.0
Sxx08D 1. 5
Rθ(J-A) Junction to ambient
Sxx08RSy 40
°C/W
Sxx08LSy 65
Sxx08VSy 85
Sxx08R 40
Sxx08L 50
Sxx08V 70
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: Normalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
0.0
1.0
2.0
3.0
4.0
-40 -15 10 35 60 85 110
Junction Temperature (TJ) - (°C)
Ratio of IGT / IGT (TJ = 25°C)
125
0.0
1.0
2.0
3.0
4.0
-40 -15 10 35 60 85 110
Junction Temperature (TJ) - (°C)
Ratio of IGT / IGT (TJ = 25°C)
233
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Figure 5: On-State Current
vs. On-State Voltage (Typical)
Figure 6: Power Dissipation (Typical)
vs. RMS On-State Current
0
1
2
3
4
5
6
7
8
RMS On-State Current [I
T(RMS)
] - (Amps)
Average On-State Power Dissipation
[P
D(AV)
] -- (Watts)
0 1 2 3 4 5 6 7 8
125
0.0
0.5
1.0
1.5
2.0
-40 -15 10 35 60 85 110
Junction Temperature (TJ) - (°C)
Ratio of VGT / VGT (TJ = 25°C)
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 4: Normalized DC Holding Current
vs. Junction Temperature
125
0.0
0.5
1.0
1.5
2.0
-40 -15 10 35 60 85 110
Junction Temperature (TJ) - (°C)
Ratio of IH / IH (TJ = 25°C)
0
4
8
12
16
20
24
28
32
0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1. 6
Instantaneous On-state Voltage (vT) – Volts
Instantaneous On-state Current (iT) – Amps
TJ = 25°C
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
Figure 8: Maximum Allowable Case Temperature
vs. Average On-State Current
80
85
90
95
100
105
110
115
120
125
130
Sx08LSy
Sxx08RSy
Sxx08DSy
Sxx08VSy
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
Conduction Angle: 180°
FREE AIR RATING
Average On-State Current [IT(AVE)] - Amps
Maximum Allowable Case Temperature
(TC) - °C
Sxx08R
Sxx08D
Sxx08V
012345
Sxx08L
80
85
90
95
100
105
110
115
120
125
130
0 1 2 3 4 5 6 7 8 9
Sxx08RSy
Sxx08DSy
Sxx08VSy
Sxx08R
Sxx08D
Sxx08V
Sxx08LSy
Sxx08L
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
Conduction Angle: 180°
FREE AIR RATING
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Case
Temperature (TC) - °C
234
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
0
20
40
60
80
100
120
Sxx08R
Sxx08L
Sxx08V
Sxx08RSy
Sxx08LSy
0.0 0.5 1.0 1.5 2.0 2.
5
RMS On-State Current [IT(RMS)] - Amps
Maximum Allowable Ambient Temperature
(T
A
) - °C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx08VSy
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
0
20
40
60
80
100
120
5.10.15.00.0
Sxx08V
Sxx08R
Sxx08VSy
Average On-State Current [IT(AVE)] - Amps
Maximum Allowable Ambient Temperature
(T
A
) - °C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx08RSy
Sxx08LSy
Sxx08L
Note: xx = voltage, y = sensitivity
1
10
100
0001001011
Surge Current Duration -- Full Cycles
Peak Surge (Non-repetitive)On-state
Current (I
TSM
) – Amps
Figure 13: Surge Peak On-State Current vs. Number of Cycles
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
Figure 11: Peak Capacitor Discharge Current
10
100
1000
0.010.10.5 50.0
Pulse Current Duration (tw) - ms
Peak Discharge Current (I
TM
) - Amps
ITRM
tW
Figure 12: Peak Capacitor Discharge Current Derating
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Normalized Peak Current
Sensitive SCR
0 25 50 75 100 125 150
Case Temperature (TC) - °C
Standard SCR
235
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak 5°C/second max
TS(max) to TL - Ramp-up Rate 5°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Temperature (tL)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Physical Specifications Environmental Specifications
Test Specifications and Conditions
AC Blocking MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature/
Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage 1008 hours; -40°C
Thermal Shock
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat MIL-STD-750 Method 2031
Solderability ANSI/J-STD-002, category 3, Test A
Lead Bend MIL-STD-750, M-2036 Cond E
Terminal Finish 100% Matte Tin-plated
Body Material UL recognized epoxy meeting ammability
classification 94V-0
Lead Material Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
r
e
h
eat
Ramp-upRamp-up
Ramp-down
R
am
p
-
do
236
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G0.540 0.575 13.72 14.61
H0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1. 14 1.52
R 0.038 0.048 0.97 1.22
K
J
A
H
G
B
F
E
C
D
L
R
T
C
MEASURING POINT
ANODE
O
P
N
M
.276
7. 01
.526
13.36
.320
8.13
AREA (REF.) 0.17 IN
2
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
GATECATHODE ANODE
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G0.540 0.575 13.72 14.61
H0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1. 14 1.52
R 0.038 0.048 0.97 1.22
A
H
G
B
F
E
C
D
L
R
T
C
MEASURING POINT AREA (REF.) 0.17 IN
2
O
P
N
M
.320
8.13
.526
13.36
.276
7. 01
K
J
GATECATHODE ANODE
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
237
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
Dimension Inches Millimeters
Min Typ Max Min Typ Max
A 0.040 0.044 0.050 1.02 1. 11 1.27
B 0.235 0.242 0.245 5.97 6.15 6.22
C 0.350 0.361 0.375 8.89 9.18 9.53
D 0.205 0.208 0.213 5.21 5.29 5.41
E 0.255 0.262 0.265 6.48 6.66 6.73
F 0.027 0.031 0.033 0.69 0.80 0.84
G0.087 0.090 0.093 2.21 2.28 2.36
H0.085 0.092 0.095 2.16 2.34 2.41
I 0.176 0.180 0.184 4.47 4.57 4.67
J 0.018 0.020 0.023 0.46 0.51 0.58
K0.038 0.040 0.044 0.97 1. 01 1. 12
L 0.018 0.020 0.023 0.46 0.52 0.58
P 0.042 0.047 0.052 1.06 1.20 1.32
Q 0.034 0.039 0.044 0.86 1. 0 0 1. 11
R 0.034 0.039 0.044 0.86 1. 0 0 1. 11
S 0.074 0.079 0.084 1.86 2.00 2.11
AREA: 0.040 IN
2
T
C
MEASURING POINT
GATE G
I
E
D
A
B
C
F
J
H
K
L
5.28
.208
5.34
.210
Anode
Cathode
Anode
P
Q
RS
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Dimension Inches Millimeters
Min Typ Max Min Ty p Max
A 0.040 0.043 0.050 1.02 1.09 1.27
B 0.235 0.243 0.245 5.97 6.16 6.22
C 0.106 0.108 0.113 2.69 2.74 2.87
D 0.205 0.208 0.213 5.21 5.29 5.41
E 0.255 0.262 0.265 6.48 6.65 6.73
F 0.027 0.031 0.033 0.69 0.80 0.84
G0.087 0.090 0.093 2.21 2.28 2.36
H0.085 0.092 0.095 2.16 2.33 2.41
I 0.176 0.179 0.184 4.47 4.55 4.67
J 0.018 0.020 0.023 0.46 0.51 0.58
K0.038 0.040 0.044 0.97 1.02 1. 1 2
L 0.018 0.020 0.023 0.46 0.51 0.58
M 0.000 0.000 0.004 0.00 0.00 0.10
N 0.021 0.026 0.027 0.53 0.67 0.69
O 0° 0° 5° 0° 0° 5°
P 0.042 0.047 0.052 1.06 1.20 1.32
Q 0.034 0.039 0.044 0.86 1. 0 0 1. 11
M
O
N
H
J
L
K
.118
3
.063
1.60
.071
1.80
.264
6.71
.264
6.71
.181
4.60
GATE
Anode
Cathode
Anode
T
C
MEASURING POINT
G
I
D
E
A
B
C
F
5.28
.208
5.34
.210
: 0.040 IN
2
AREA
P
Q
238
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Product Selector
Part Number Voltage Gate Sensitivity Type Package
400V 600V 800V 1000V
Sxx08RS2 X X 0.2mA Sensitive SCR TO-220R
Sxx08LS2 X X 0.2mA Sensitive SCR TO-220L
Sxx08VS2 X X 0.2mA Sensitive SCR TO-251
Sxx08DS2 X X 0.2mA Sensitive SCR TO-252
Sxx08RS3 X X 0.5mA Sensitive SCR TO-220R
Sxx08LS3 X X 0.5mA Sensitive SCR TO-220L
Sxx08VS3 X X 0.5mA Sensitive SCR TO-251
Sxx08DS3 X X 0.5mA Sensitive SCR TO-252
Sxx08R X X X X 15mA Standard SCR TO-220R
Sxx08L X X X X 15mA Standard SCR TO-220L
Sxx08V X X X X 15mA Standard SCR TO-251
Sxx08D X X X X 15mA Standard SCR TO-252
Note: xx = Voltage
Packing Options
Part Number Marking Weight Packing Mode Base Quantity
Sxx08L/Ryy Sxx08L/Ryy 2.2 g Bulk 500
Sxx08L/RyyTP Sxx08L/Ryy 2.2 g Tube 500 (50 per tube)
Sxx08DyyTP Sxx08Dyy 0.3 g Tube 750 (75 per tube)
Sxx08DyyRP Sxx08Dyy 0.3 g Embossed Carrier 2500
Sxx08VyyTP Sxx08Vyy 0.4 g Tube 750 (75 per tube)
Sxx08L/R Sxx08L/R 2.2 g Bulk 500
Sxx08L/RTP Sxx08L/R 2.2 g Tube 500 (50 per tube)
Sxx08DTP Sxx08D 0.3 g Tube 750 (75 per tube)
Sxx08DRP Sxx08D 0.3 g Embossed Carrier 2500
Sxx08VTP Sxx08V 0.4 g Tube 750 (75 per tube)
Note: xx = Voltage; yy = Sensitivity
239
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
0.512 (13.0)
Arbor Hole
Diameter
DC
XXXXXX
XXXXXX
DC
XXXXXX
DC
XXXXXX
XX
Gate Cathode
Anode
0.63
(16.0)
0.157
(4.0)
0.64
(16.3)
12.99
(330.0)
0.524
(13.3)
0.315
(8.0)
0.059 DIA
(1.5)
*
* Cover tape
XX
XX
Direction of Feed
Dimensions
are in inches
(and millimeters).
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
Part Numbering System Part Marking System
S60 08 LS2 56
DEVICE TYPE
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
08: 8A
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
(blank): 15mA
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
V: TO-251 (V/I-Pak)
D: TO-252 (D-Pak)
LEAD FORM DIMENSIONS
xx: Lead Form Option
S6008DS2
YMLDD
TO-252AA – (D Package)
TO-251AA –(V Package)
S6008F1
yxxxx
TO-202 Type 1 (F Package)
®
®
®
®
MY
MXXX
Y
S6008RS2
S6008LS2
S6008DS2
YMLDD
TO-252AA – (D Package)
TO-251AA –(V Package)
S6008F1
yxxxx
TO-202 Type 1 (F Package)
®
®
®
®
MY
MXXX
Y
S6008RS2
S6008LS2
