TCXO STO150 Typical Applications PCS Base Stations Land Mobile Radio Cellular Telephony Radio in the Local Loop Digital Switching Features Mechanical Control EFC Optional Standard Surface Mount Package Wide Temperature Range Wide Frequency Range Frequency Range Standard Frequencies Frequency stabilities Parameter vs. Operating temperature range 10 MHz - 80 MHz 10; 13; 16.384; 19.44; 20; 25.92; 38.88MHz Code I Frequency stability Operating temp range 07 08 03 04 05 06 2.0 ppm 1.0 ppm 2.0 ppm 1.0 ppm 1.0 ppm 0.5 ppm -40 ... +85 Parameter Vs. Supply voltage change vs. Load change vs. Aging / year Parameter Overall tolerance 15 years -20 ... +70C 0 ... 50C Value Condition < 0.2 ppm < 0.2 ppm < 1.0 ppm Vs 5% Load 10% Option I Value Condition S3 < 4.6 ppm See Datasheet STO150S3 Frequency tuning Parameter Option II Value Condition Mechanical (No EFC) Blank > 3.0 ppm > 5.0 ppm 0.5 to 4.5 V 0.3 to 3.0 V positive >10 k (internal trimmer) Note 1 @ VS=5.0 V @ VS= 3.3 V Code III Value Condition 06 HCMOS 25pF 10% 15pF 10% 40/60% < -45dBc @ < 20MHz @ 20MHz @ VS/2 @ > 33MHz Code II Value Condition Supply voltage (VS) Current consumption 05 Supply voltage (VS) Current consumption 33 5.0 V 5% < 3 mA 5mA to 50mA 3.3 V 5% < 3 mA 5mA to 50mA Electrical freq. control (EFC) U Voltage range (Vc) Pulling slope Freq. control input impedance 4 RF Output Parameter Signal Load Duty cycle Subharmonics Supply Voltage Parameter Corning Frequency Control * Worldwide Data Book 2001 Clipped Sinewave HCMOS Clipped Sinewave HCMOS v1.1.2002-01-03 Corning Frequency Control Inc. * 100 Watts Street * Mt. Holly Springs, PA 17065 * Tel 1-717-486-3411 * Fax 1-717-486-5920 * www.corningfrequency.com Corning Frequency Control GmbH & Co. KG * Landstrasse * D-74924 Neckarbischofsheim, Germany * Tel +49-7268-801-0 * Fax +49-07268-801-281 * www.corningfrequency.de 1/4 TCXO STO150 Additional parameters Parameter Value Phase Noise Condition <- 95 dBc <-130 dBc <-140 dBc <-150 dBc <-150 dBc <5g - 40 ... +90C - 55 ... +105C Weight Operable temperature range Storage temperature range Processing & Packing 10 100 1 10 100 Hz Hz kHz KHz kHz Note 2 handling&processing note Enclosure Type Drawing G182A option 6,7 G182 4 3 13 3 0,1 H = 8,3 ; G182 A 1 2 1,27 1,270,1 19,9 0,1 0,1 Pin 1 Identification H 0,8 0,2 7,62 18,5max. 19,10,1 0,1 0,1 10 all units in mm Pin Connections Pin 1 Pin 1 Pin 2 Pin 3 Pin 4 Ordering Code Model Example: Order: Notes 1 2 STO150 STO150 N.C. Voltage Control (Vc) GND, case RF output Supply Voltage (VS) Option I Stratum III Option Option II Frequency tuning U Option U Code I Frequency Stability 04. Code II Supply Voltage 05. Mechanical freq. Control Electrical and mech. freq. Control Code III RF Output 06. Frequency 10M00000 Others available; Option "U" includes the mechanical frequ. control Typical values @ 10 MHz Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) Subject to technical modification; Not all options are available at all Frequencies Corning Frequency Control * Worldwide Data Book 2001 v1.1.2002-01-03 Corning Frequency Control Inc. * 100 Watts Street * Mt. Holly Springs, PA 17065 * Tel 1-717-486-3411 * Fax 1-717-486-5920 * www.corningfrequency.com Corning Frequency Control GmbH & Co. KG * Landstrasse * D-74924 Neckarbischofsheim, Germany * Tel +49-7268-801-0 * Fax +49-07268-801-281 * www.corningfrequency.de 2/4