BC807-25W, SBC807-25W, BC807-40W, SBC807-40W General Purpose Transistors PNP Silicon http://onsemi.com Features * AEC-Q101 Qualified and PPAP Capable * S Prefix for Automotive and Other Applications Requiring Unique * COLLECTOR 3 Site and Control Change Requirements These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant 1 BASE 2 EMITTER MAXIMUM RATINGS Symbol Value Unit Collector - Emitter Voltage Rating VCEO -45 V Collector - Base Voltage VCBO -50 V Emitter - Base Voltage VEBO -5.0 V 2 IC -500 mAdc SC-70 CASE 419 STYLE 3 Characteristic Symbol Max Unit Total Device Dissipation FR- 5 Board, (Note 1) TA = 25C PD 460 mW RqJA 272 C/W TJ, Tstg -55 to +150 C Collector Current - Continuous 3 1 THERMAL CHARACTERISTICS Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-4 Board, 1 oz. Cu, 100 mm2. MARKING DIAGRAM 5x M G G 1 5x M G = Device Code x = B or C = Date Code* = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2011 November, 2011 - Rev. 3 1 Publication Order Number: BC807-25W/D BC807-25W, SBC807-25W, BC807-40W, SBC807-40W ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (IC = -10 mA) V(BR)CEO -45 - - V Collector -Emitter Breakdown Voltage (VEB = 0, IC = -10 mA) V(BR)CES -50 - - V Emitter -Base Breakdown Voltage (IE = -1.0 mA) V(BR)EBO -5.0 - - V - - - - -100 -5.0 nA mA 160 250 40 - - - 400 600 - OFF CHARACTERISTICS Collector Cutoff Current (VCB = -20 V) (VCB = -20 V, TJ = 150C) ICBO ON CHARACTERISTICS DC Current Gain (IC = -100 mA, VCE = -1.0 V) hFE BC807-25, SBC807-25 BC807-40, SBC807-40 (IC = -500 mA, VCE = -1.0 V) - Collector -Emitter Saturation Voltage (IC = -500 mA, IB = -50 mA) VCE(sat) - - -0.7 V Base -Emitter On Voltage (IC = -500 mA, IB = -1.0 V) VBE(on) - - -1.2 V fT 100 - - MHz Cobo - 10 - pF SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = -10 mA, VCE = -5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = -10 V, f = 1.0 MHz) ORDERING INFORMATION Device Specific Marking Package Shipping 5B SC-70 (Pb-Free) 3000 / Tape & Reel BC807-25WT1G SBC807-25T1G BC807-25WT3G 10,000 / Tape & Reel BC807-40WT1G SBC807-40WT1G SC-70 (Pb-Free) 5C 3000 / Tape & Reel 10,000 / Tape & Reel BC807-40WT3G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 BC807-25W, SBC807-25W, BC807-40W, SBC807-40W TYPICAL CHARACTERISTICS - BC807-25W, SBC807-25W 500 1 VCE = 1 V VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 150C 400 25C 300 200 -55C 100 0 0.001 0.01 0.01 0.1 1 Figure 1. DC Current Gain vs. Collector Current Figure 2. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) -55C IC/IB = 10 25C 0.8 150C 0.7 0.6 0.5 0.4 0.3 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 -55C 0.9 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. Base Emitter Saturation Voltage vs. Collector Current Figure 4. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 0.001 IC, COLLECTOR CURRENT (A) 0.9 0.2 -55C 0.1 IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.01 1 0.1 IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 1000 IC, COLLECTOR CURRENT (A) Figure 5. Current Gain Bandwidth Product vs. Collector Current http://onsemi.com 3 1 BC807-25W, SBC807-25W, BC807-40W, SBC807-40W VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC807-25W, SBC807-25W -1.0 TJ = 25C -0.8 IC = -500 mA -0.6 -0.4 IC = -300 mA -0.2 IC = -100 mA IC = -10 mA 0 -0.01 -0.1 -1.0 -10 IB, BASE CURRENT (mA) -100 100 +1.0 qVC for VCE(sat) C, CAPACITANCE (pF) V, TEMPERATURE COEFFICIENTS (mV/C) Figure 6. Saturation Region 0 -1.0 -2.0 -1.0 qVB for VBE -10 -100 IC, COLLECTOR CURRENT Cib 10 Cob 1.0 -0.1 -1000 Figure 7. Temperature Coefficients -1.0 -10 VR, REVERSE VOLTAGE (VOLTS) Figure 8. Capacitances http://onsemi.com 4 -100 BC807-25W, SBC807-25W, BC807-40W, SBC807-40W TYPICAL CHARACTERISTICS - BC807-40W, SBC807-40W 1000 1 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) VCE = 1 V 900 150C 800 700 600 500 25C 400 300 -55C 200 100 0 0.001 0.01 0.01 0.1 1 Figure 9. DC Current Gain vs. Collector Current Figure 10. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) -55C IC/IB = 10 25C 0.8 150C 0.7 0.6 0.5 0.4 0.3 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 11. Base Emitter Saturation Voltage vs. Collector Current Figure 12. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 0.001 IC, COLLECTOR CURRENT (A) 0.9 0.2 -55C 0.1 IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.01 1 0.1 IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 IC, COLLECTOR CURRENT (A) Figure 13. Current Gain Bandwidth Product vs. Collector Current http://onsemi.com 5 1000 1 BC807-25W, SBC807-25W, BC807-40W, SBC807-40W VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC807-40W, SBC807-40W -1.0 TJ = 25C -0.8 IC = -500 mA -0.6 -0.4 IC = -300 mA -0.2 IC = -100 mA IC = -10 mA 0 -0.01 -0.1 -1.0 -10 IB, BASE CURRENT (mA) -100 100 +1.0 qVC for VCE(sat) C, CAPACITANCE (pF) V, TEMPERATURE COEFFICIENTS (mV/C) Figure 14. Saturation Region 0 -1.0 -2.0 -1.0 qVB for VBE -10 -100 IC, COLLECTOR CURRENT Cib 10 Cob 1.0 -0.1 -1000 Figure 15. Temperature Coefficients -1.0 -10 VR, REVERSE VOLTAGE (VOLTS) Figure 16. Capacitances http://onsemi.com 6 -100 BC807-25W, SBC807-25W, BC807-40W, SBC807-40W TYPICAL CHARACTERISTICS - BC807-25W, SBC807-25W, BC807-40W, SBC807-40W IC, COLLECTOR CURRENT (A) 1 1 mS 1S 100 mS 0.1 10 mS Thermal Limit 0.01 0.001 0.1 1 10 100 VCE, COLLECTOR EMITTER VOLTAGE (V) Rthja(t), TRANSIENT THERMAL RESPONSE (C/W) Figure 17. Safe Operating Area 1000 D = 0.5 100 0.2 0.1 0.05 10 0.02 0.01 1 0.000001 Single Pulse 0.00001 0.0001 0.001 0.01 0.1 t, PULSE TIME (s) Figure 18. Thermal Response http://onsemi.com 7 1 10 100 1000 BC807-25W, SBC807-25W, BC807-40W, SBC807-40W PACKAGE DIMENSIONS SC-70 (SOT-323) CASE 419-04 ISSUE N D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. e1 DIM A A1 A2 b c D E e e1 L HE 3 E HE 1 2 b e A 0.05 (0.002) c A2 MIN 0.80 0.00 0.30 0.10 1.80 1.15 1.20 0.20 2.00 MILLIMETERS NOM MAX 0.90 1.00 0.05 0.10 0.70 REF 0.35 0.40 0.18 0.25 2.10 2.20 1.24 1.35 1.30 1.40 0.65 BSC 0.38 0.56 2.10 2.40 MIN 0.032 0.000 0.012 0.004 0.071 0.045 0.047 0.008 0.079 INCHES NOM 0.035 0.002 0.028 REF 0.014 0.007 0.083 0.049 0.051 0.026 BSC 0.015 0.083 MAX 0.040 0.004 0.016 0.010 0.087 0.053 0.055 0.022 0.095 STYLE 3: PIN 1. BASE 2. EMITTER 3. COLLECTOR L A1 SOLDERING FOOTPRINT* 0.65 0.025 0.65 0.025 1.9 0.075 0.9 0.035 0.7 0.028 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 8 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC807-25W/D