Semiconductor Components Industries, LLC, 2004
June, 2004 − Rev. 5 Publication Order Number:
BC807−16LT1/D
1
BC807−16LT1,
BC807−25LT1, BC807−40LT1
General Purpose
Transistors
PNP Silicon
Features
Pb−Free Packages are Available
MAXIMUM RATINGS
Rating Symbol Value Unit
Collector - Emitter Voltage VCEO −45 V
Collector - Base Voltage VCBO −50 V
Emitter - Base Voltage VEBO −5.0 V
Collector Current − Continuous IC−500 mAdc
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits
are exceeded, device functional operation is not implied, damage may occur
and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Total Device Dissipation FR−5 Board,
(Note 1) TA = 25°C
Derate above 25°C
PD225
1.8 mW
mW/°C
Thermal Resistance, Junction−to−Ambient RJA 556 °C/W
Total Device Dissipation Alumina Substrate,
(Note 2) TA = 25°C
Derate above 25°C
PD300
2.4 mW
mW/°C
Thermal Resistance, Junction−to−Ambient RJA 417 °C/W
Junction and Storage Temperature TJ, Tstg 55 to
+150 °C
1. FR−5 = 1.0 x 0.75 x 0.062 in.
2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina.
SOT−23
CASE 318
STYLE 6
MARKING
DIAGRAM
3
12
xxxD
12
3
http://onsemi.com
xxx = 5A (BC807−16LT1)
D = Date Code
COLLECTOR
3
1
BASE
2
EMITTER
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
ORDERING INFORMATION
5B1 (BC807−25LT1)
5C (BC807−40LT1)
BC807−16LT1, BC807−25LT1, BC807−40LT1
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
CollectorEmitter Breakdown Voltage
(IC = −10 mA) V(BR)CEO −45 V
CollectorEmitter Breakdown Voltage
(VEB = 0, IC = −10 A) V(BR)CES −50 V
EmitterBase Breakdown Voltage
(IE = −1.0 A) V(BR)EBO −5.0 V
Collector Cutoff Current
(VCB = −20 V)
(VCB = −20 V, TJ = 150°C)
ICBO
−100
−5.0 nA
A
ON CHARACTERISTICS
DC Current Gain
(IC = −100 mA, VCE = −1.0 V) BC807−16
BC807−25
BC807−40
(IC = −500 mA, VCE = −1.0 V)
hFE 100
160
250
40
250
400
600
CollectorEmitter Saturation Voltage
(IC = −500 mA, IB = −50 mA) VCE(sat) −0.7 V
BaseEmitter On V oltage
(IC = −500 mA, IB = −1.0 V) VBE(on) −1.2 V
SMALL−SIGNAL CHARACTERISTICS
CurrentGain − Bandwidth Product
(IC = −10 mA, VCE = −5.0 Vdc, f = 100 MHz) fT100 MHz
Output Capacitance
(VCB = −10 V, f = 1.0 MHz) Cobo 10 −0.7 pF
DEVICE ORDERING INFORMATION
Device Package Shipping
BC807−16LT1 SOT−23 3,000 Tape & Reel
BC807−16LT3 SOT−23 10,000 Tape & Reel
BC807−25LT1 SOT−23
BC807−25LT1G SOT−23
(Pb−Free) 3,000 Tape & Reel
BC807−25LT3 SOT−23 10,000 Tape & Reel
BC807−40LT1 SOT−23
BC807−40LT1G SOT−23
(Pb−Free) 3,000 Tape & Reel
BC807−40LT3 SOT−23
BC807−40LT3G SOT−23
(Pb−Free) 10,000 Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
BC807−16LT1, BC807−25LT1, BC807−40LT1
http://onsemi.com
3
IC, COLLECTOR CURRENT (mA)
Figure 1. DC Current Gain
hFE, DC CURRENT GAIN
1000
10
−1000−0.1 −10 −100
100
−1.0
VCE = −1.0 V
TA = 25°C
IB, BASE CURRENT (mA)
Figure 2. Saturation Region
IC, COLLECTOR CURRENT (mA)
Figure 3. “On” Voltages
100
10
1.0
VR, REVERSE VOLTAGE (VOLTS)
Figure 4. Temperature Coefficients
+1.0
IC, COLLECTOR CURRENT
Figure 5. Capacitances
−0.1 −1.0−1.0 −10 −100 −1000
−2.0
−1.0
0
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS
)
V, VOLTAGE (VOLTS)
V, TEMPERATURE COEFFICIENTS (mV/ C)°θ
C, CAPACITANCE (pF)
−1.0
−0.8
−0.6
−0.4
−0.2
0
−0.01 −0.1 −10 −100−1.0
−1.0
−0.8
−0.6
−0.4
−0.2
0
−1.0 −10 −1000−100
−10 −100
TJ = 25°C
IC = −10 mA
IC = −100 mA
IC = −300 mA
IC =
−500 mA
TA = 25°C
VBE(sat) @ IC/IB = 10
VBE(on) @ VCE = −1.0 V
VCE(sat) @ IC/IB = 10
VC for VCE(sat)
VB for VBE
Cob
Cib
BC807−16LT1, BC807−25LT1, BC807−40LT1
http://onsemi.com
4
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−09
ISSUE AI
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
mm
inches
SCALE 10:1
0.8
0.031
0.9
0.035
0.95
0.037
0.95
0.037
2.0
0.079
DIM
AMIN MAX MIN MAX
MILLIMETERS
0.1102 0.1197 2.80 3.04
INCHES
B0.0472 0.0551 1.20 1.40
C0.0385 0.0498 0.99 1.26
D0.0140 0.0200 0.36 0.50
G0.0670 0.0826 1.70 2.10
H0.0040 0.0098 0.10 0.25
J0.0034 0.0070 0.085 0.177
K0.0180 0.0236 0.45 0.60
L0.0350 0.0401 0.89 1.02
S0.0830 0.0984 2.10 2.50
V0.0177 0.0236 0.45 0.60
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. 318−01, −02, AND −06 OBSOLETE, NEW STANDARD 318−09.
1
3
2
AL
BS
VG
DH
C
KJ
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
BC807−16LT1/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.