8HD
■Panel Cut-Out Dimensions
■Lever・Rocker Installation Procedure ■Mounting Frame mounting Method
●
Install the mounting frame as shown in the photo below.
●
To mount the switch on the panel, press in the switch from
the panel side with uniform pressure on the right and left.
Panel thickness(with Mounting Frame) : 1 to 2.5mm Panel thickness(with Mounting Frame) : 1 to 3mm
■Accessories 《Supplied separately》
Standard Accessories Optional Accessories
PartName Lever Rocker Mounting Frame
Dimensions
Mattefinish Mattefinish Mattefinish polyacetal resin
polycarbonateresin polycarbonateresin 140000600181
White
140000050558 140000480594
140000340127+140000600181
Red
140000050559 140000480595
140000340128+140000600181
Black
140000050560 140000480596
140000340129+140000600181
Gray
140000050561 140000480597
140000340130+140000600181
○Specify either one of Lever or Rocker in part number when placing an order.
(ON):Momentary.
:Optional Accessories.
■Table of Part Numbers
Terminal style
Switching function 1−pole 2−pole
Solder Terminal
ON −ON ☆
8HD1011−Z
▲
8HD1011C−Z
☆
8HD2011−Z
▲
8HD2011C−Z
ON − OFF −ON ★
8HD1021−Z
▲
8HD1021C−Z
☆
8HD2021−Z
▲
8HD2021C−Z
(ON)− OFF −(ON)★
8HD1041−Z
★
8HD2041−Z
ON − OFF −(ON)★
8HD1051−Z
★
8HD2051−Z
ON −(ON)★
8HD1061−Z
★
8HD2061−Z
PC Straight
ON −ON ★
8HD1012−Z
★
8HD2012−Z
ON − OFF −ON ★
8HD1022−Z
★
8HD2022−Z
(ON)− OFF −(ON)★
8HD1042−Z
★
8HD2042−Z
ON − OFF −(ON)
▲
8HD1052−Z
▲
8HD2052−Z
ON −(ON)★
8HD1062−Z
★
8HD2062−Z
Some products in the Table of UL and CSA-
Approved Products are not registered yet.
Before placing the order, check with our Sales
Department.
2.
tainless-stee
lat
★:Made to order products.
☆:Semi-standard products.
▲
: Inquiry products.
●For and Flux Cleaning, see page 349.