Crimp Tool
Crimp Terminal Inserts
6 + G 10 + G 16 + G
Male Insert MC406B MC410B MC416B
(Order contacts below)
Female Insert FC306B FC310B FC316B
(Order contacts below)
For all Crimp Terminal “B” Inserts
Screw Terminal Inserts
6 + G 10 + G 16 + G
Male – Pins MS206B MS210B MS216B
20-14 AWG (0.5-2.5 mm2)
Female – Sleeves FS106B FS110B FS116B
20-14 AWG (0.5-2.5 mm2)
Crimp Contacts Wire AWG (mm2) Identification Female Male
20 AWG (0.5 mm2) No Groove FP2000 MP2000
18 AWG (0.75-1 mm2) 1 Groove FP1800 MP1800
16 AWG (1.5 mm2) 2 Grooves FP1600 MP1600
14 AWG (2.5 mm2) 3 Grooves FP1400 MP1400
12 AWG (4.0 mm2) No Groove FP1200 MP1200
DIN Rail Adapter Mount Frames
6 + G 10 + G 16 + G
125 mm long, with base AMF006 AMF010 AMF016
for snapping onto DIN rail
150 mm long, with base AMF106 AMF110 AMF116
for snapping onto DIN rail
150 mm long, with base AMF112 – –
for TWO inserts
6, 10, 16, 24, 32, 48 Contacts + Ground
Install to
Matching Series
Hood/Base
6 10 16 6 10 16
16 Amps 600 Vac
6 10 16
Allows use of “open” interiors as separable
barrier terminal blocks for panel assemblies –
or can be used as OEM wiring assembly fixture.
Accepts any Terminal Insert to same series.
Screw Terminal Wiring Adapter Blocks
6 + G 10 + G 16 + G
Male Insert, Ground L. MS206WAL MS210WAL MS216WAL
20-14 AWG (0.5-2.5 mm2)
Male Insert, Ground R. MS206WAR MS210WAR MS216WAR
20-14 AWG (0.5-2.5 mm2)
Female Insert, Ground L. FS106WAL FS110WAL FS116WAL
20-14 AWG (0.5-2.5 mm2)
Female Insert, Ground R. FS106WAR FS110WAR FS116WAR
20-14 AWG (0.5-2.5 mm2)
Foot Element mounting FE807TB FE807TB FE807TB
adapter for DIN rail 2 each needed 2 each needed 2 each needed
Contacts Selection
B Series
Accessories: Catalog No.
Label Insert Clip WAM-1
Strip blank WAM1B
Strip Nos. 1-64 WAM1N64
Strip Letters A - Z WAM1AZ
Wiring Adapter Insert for use with Panel
Bases; allows single access direction
panel-build wiring + easy terminal ID for
service & testing.
For all Inserts
WT611TB
Use small blade screwdriver to push wire
entry tab in for EZ contact removal.
Groove
I18 © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com
I
Pos-E-Kon™
412031.I01 PK 3/5 3/13/03 9:05 PM Page 18
Quality Systems,
Quality Parts
DIN EN ISO 9001 Systems.
Approvals:
DIN, IEC, VDE, UL, and CSA
for world use.
Space Saving
Maximum circuits in minimum
space – shaped to fit panels
and machines.
Quick & Easy Housing
Connections
Unique roller locking double
lever handles.
Sealed Connections
Neoprene or HT-Viton housing
assembly seals to IP65 for
washdown duty.
Wiring In Any System
Standard NPT fittings provided,
with many other cable or
conduit entry options available.
Any Access Needed
Top, side and custom options,
including ribbon cable.
Rough Service,
Tough Duty
Die cast housings with hard-
shell powder-coat finish.
Easy Circuit Location
Hot-stamped contact positions
and catalog numbers.
Performance Plus
Standard (125°C) and 200°C
interiors available.
Wiring Your Way
Standard Screw Terminal and
Crimp Terminal Inserts, with
Fiber Optic and other contacts
also available.
Heavy Duty Multi-Circuit
Rectangular Industrial
Connectors
Customer Benefits
T Series
POS-E-KON, a trademark of Tyco Electronics Corporation, is used under
exclusive license by Thomas & Betts Corporation. Thomas & Betts
Corporation and Tyco Electronics Corporation are not otherwise affiliated.
412031.I01 PK 3/5 3/20/03 3:00 PM Page 2
Dimensions
INSERT SERIES MATING DIMENSIONS ARE IN INCHES / (MILLIMETERS)
A, B, T, K C, V D DD M AB C DE
A3, A4 BOTH – .83 / (21) – .83 / (21)) .98 / (25)
D7, D8 FEMALE – .83 / (21) – .83 / (21) 1.25 / (31.8)
MALE – .83 / (21) – .83 / (21) 1.19 / (30.2)
A10 D15 FEMALE 1.95 / (49.5) 2.22 / (56.5) .63 / (16) 1.34 / (34) 1.14 / (29)
MALE 1.95 / (49.5) 2.22 / (56.5) .63 / (16) 1.34 / (34) 1.26 / (32)
A16 D25 FEMALE 2.60 / (66) 2.87 / (73) .63 / (16) 1.34 / (34) 1.14 / (29)
MALE 2.60 / (66) 2.87 / (73) .63 / (16) 1.34 / (34) 1.26 / (32)
A32 D50 FEMALE 2.60 / (66) 2.87 / (73) .63 / (16) x 2 1.34 / (34) 1.14 / (29)
MALE 2.60 / (66) 2.87 / (73) .63 / (16) x 2 1.34 / (34) 1.26 / (32)
B6, T6 DD24 M2 FEMALE 1.73 / (44) 2.01 / (51) 1.063 / (27) 1.34 / (34) 1.46 / (37)
MALE 1.73 / (44) 2.01 / (51) 1.063 / (27) 1.34 / (34) 1.38 / (35)
B10, T10 V3 DD42 M3 FEMALE 2.24 / (57) 2.52 / (64) 1.063 / (27) 1.34 / (34) 1.46 / (37)
MALE 2.24 / (57) 2.52 / (64) 1.063 / (27) 1.34 / (34) 1.38 / (35)
B16, T16 C6, V6 D40 DD72 M5 FEMALE 3.05 / (77.5) 3.33 / (84.5) 1.063 / (27) 1.34 / (34) 1.48 / (37.5)
MALE 3.05 / (77.5) 3.33 / (84.5) 1.063 / (27) 1.34 / (34) 1.40 / (35.5)
B24, T24, V10, V16 D64 DD108 M7 FEMALE 4.09 / (104) 4.37 / (111) 1.063 / (27) 1.34 / (34) 1.48 / (37.5)
K12 MALE 4.09 / (104) 4.37 / (111) 1.063 / (27) 1.34 / (34) 1.40 / (35.5)
B32 C12 D80 DD144 FEMALE 3.05 / (77.5) 3.33 / (84.5) 1.063 / (27) x 2 1.34 / (34) 1.48 / (37.5)
MALE 3.05 / (77.5) 3.33 / (84.5) 1.063 / (27) x 2 1.34 / (34) 1.40 / (35.5)
B48, K24 V20, V26, D128 DD216 FEMALE 4.09 / (104) 4.37 / (111) 1.063 / (27) x 2 1.34 / (34) 1.48 / (37.5)
V32 MALE 4.09 / (104) 4.37 / (111) 1.063 / (27) x 2 1.34 / (34) 1.40 / (35.5)
Mounting Dimensions for Screw and Crimp Terminal Inserts
B
AC
D
E
I60 © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com
I
Pos-E-Kon™
412031.I02 PK 3/5 3/13/03 9:18 PM Page 60
