REVISION E DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] QSFPK-PF-XX DO NOT SCALE FROM THIS PRINT OPTION -01: WITHOUT HEAT SINK (USE QSFPC-PF-01 & QSFP8-038-01-L-D-RA1 ONE EACH) -02: WITH HEAT SINK ASSEMBLED (SEE NOTE 4) (USE QSFPC-PF-02, QSFP8-038-01-L-D-RA1, HS-100-01 & SH58-01 ONE EACH) -03: WITH HEAT SINK IN A KIT (USE QSFPC-PF-02, QSFP8-038-01-L-D-RA1, HS-100-01, & SH58-01 ONE EACH) PRESS FIT QSFPC-PF-01 QSFP8-038-01-L-D-RA1 FIG 1 (QSFPK-PF-01 SHOWN) PACKAGING VIEW FOR CONNECTOR (SEE NOTE 3) PACKAGING VIEW FOR CAGE (SEE NOTE 3) TUBE: PT-RPB1001 PLUG: TP-04 TUBE: PT-1-24-02-44 PLUG: TP-03 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. TOLERANCES ARE: DECIMALS NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: 1.11N[0.25 LB]. 3. PARTS TO BE PACKAGED IN TUBE. 4. HEAT SINK MUST BE REMOVED PRIOR TO TERMINATION TO PRINTED CIRCUIT BOARD. 5. SEE QSFPC-PF APPLICATION FOR ADDITIONAL TERMINATION INSTRUCTIONS. ANGLES X.X: 0.3 [.01] 2 X.XX: 0.13 [.005] X.XXX: 0.051 [.0020] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: LCP CONTACT: PHOS BRONZE SHIELD: PHOS BRONZE & SUS 304 HEAT SINK: ALUMINUM-ALLOY F:\DWG\MISC\MKTG\QSFPK-PF-XX-MKT.SLDDRW SHEET SCALE: 1.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: QSFP ASM DWG. NO. QSFPK-PF-XX BY: ROY LUO 7/5/2010 SHEET 1 OF 3 REVISION E QSFP8-038-01-L-D-RA1 QSFPC-PF-02 FIG 2 (QSFPK-PF-02 SHOWN) (SAME AS FIG. 1, EXCEPT AS SHOWN) PACKAGING VIEW FOR CONNECTOR (SEE NOTE 3) PACKAGING VIEW FOR CAGE (SEE NOTE 3) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. TUBE: PT-1-24-02-44 PLUG: TP-03 TUBE: PT-RPB1001 PLUG: TP-04 F:\DWG\MISC\MKTG\QSFPK-PF-XX-MKT.SLDDRW DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DWG. NO. QSFP ASM QSFPK-PF-XX BY: ROY LUO 7/5/2010 SHEET 2 OF 3 REVISION E PACKAGING VIEW FOR CAGE (SEE NOTE 3) HS-100-01 QSFPC-PF-03 TUBE: PT-RPB1001 PLUG: TP-04 PACKAGING VIEW FOR CONNECTOR (SEE NOTE 3) SH58-01 QSFP8-038-01-L-D-RA1 FIG 3 (QSFPK-PF-03 SHOWN) (SAME AS FIG. 1, EXCEPT AS SHOWN) PACKAGING VIEW FOR SHIELD (SEE NOTE 3) PACKAGING VIEW FOR HEAT SINK (SEE NOTE 3) TUBE: PT-1-24-02-44 PLUG: TP-03 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. TUBE: PT-1-24-01-34 PLUG: TP-07 DO NOT SCALE DRAWING TUBE: PT-1-24-14-29 PLUG: TP-03 F:\DWG\MISC\MKTG\QSFPK-PF-XX-MKT.SLDDRW SHEET SCALE: 1.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: DWG. NO. QSFP ASM QSFPK-PF-XX BY: ROY LUO 7/5/2010 SHEET 3 OF 3