|, 6040.05 [.0634+.002] - r+ 2, 1640,08 [.085+.003] rt ae 32+0,03 to ED-29689-000 SHT I.1 NOTE: A POSITIVE GOING VOLTAGE AT TERMINAL 2, RELATIVE TO THE CENTER TAP TERMINAL, OR A NEGATIVE GOING VOLTAGE AT TERMINAL I, RELATIVE TO THE CENTER TAP TERMINAL, CAUSES A DECREASE IN PRESSURE AT THE SOUND OUTLET. 2494001 Sd LOCATED FROM TWO SURFACES FOR CUSTOMER CONVENIENCE. ONLY APPLICABLE FROM ONE SURFACE, NOT TO BE USED TOGETHER. | HORIZONTAL LOCATION FOR TERMINAL CENTERED ls 4. 30540,035 TO +0,17 [.007}. [.1695+.0015] 1,1440,10 = ke |, 41+0,04 [045+ 004] [.0555+.0015] Kt | ,|4+0, 10 0,48 [.019] ht OUTER DIAMETER |,8940,17 [.045+.004] MINIMUM STRAIGHT 1074007) | | 2,9740,05 ~)} [.117+.002] A bY A V , 1340, 08 <Z | 4 h _. L "0445+.0035] |,08+0,17 D A 8] P0434 007] TERMINAL 2 MAXIMUM oe (POSITIVE) SOLDER BUILDUP TERMINAL I CENTER TAP (NEGATIVE) TERMINAL SCALE 2:1 Revision | C.0. # | Implementation Date RELEASE LEVEL REVISION NOMINAL WEIGHT CRG 10103542 12-30-05 R | qd B 31 GRAM -30- DIMENSIONS IN MILLIMETERS CINCHES] ~ aa e1ease SCALE: 4:l DR. BY DATE KNOWLES ELECTRONICS mi _8-12-08 DO NOT SCALE DRAWING ch or are ITASCA, ILLINOIS U.S.A. TITLE: RECEIVER FD-29689-000 cP a 13-05 OUTLINE DRAWING SHT 1.1 GJP_ 9-13-05 KETTIASIZE. FRM Rev: BNO DAMPING SHEET 2.1 125 dB S S 120 a 1] ~ 1 x 115 Ay Oo \ . rc Lu o le I > 110 ; . 1 * 1 <=> o s] / 1 a2 105 bers peas = ee Lg \ oe fh ee eT | naan paneer _= 100 ; == \ > 2 95 v =2 25 0 BS M. 85 * 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 100 1000 10000 FREQUENCY IN HERTZ NOTES: |. MEASUREMENTS MADE USING 10mm (.394") X Imm (.039") ID TUBE CONNECTED TO A SIMULATED ANSI S$3.7-1973 TYPE HA-3 COUPLER. (IEC 126). 2. SENSITIVITY FREQUENCY IN. MAX. 200 99.5 103.5 500 100.0 104.0 1000 102.0 106.0 1900-2300 115.0 119.0 3200-3900 102.5 --- 4000-5000 109.0 113.0 3. RESPONSE, IMPEDANCE, AND DISTORTION MEASUREMENTS MADE USING THE ELECTRICAL TEST CONDITIONS SHOWN BELOW. 4. ELECTRICAL SOURCE IMPEDANCE MUST BE GREATER THAN 20 TIMES IKHz IMPEDANCE FOR TEST CONDITIONS SHOWN BELOW. 5. INDIVIDUAL SPECIFICATIONS. IMPEDANCE DCR ELECTRICAL TEST port | OHMS +152 | a2orc | DISTORTION CONDITIONS LOCATION OHMS MAX. FREQ AC DC IKHz | 900H2 | 10% | Hz | mA RMS | mA 12 10.2 T.| 3.65 5 800 6.3 0.0 Revision C.0. # Implementation Date RELEASE LEVEL REVISION CRE | C10103542 (2-30-05 Released B A 10103002 9-12-05 WHEN TEST LIMITS ARE USED TO ESTABLISH INCOMING INSPECTION ACCEPTANCE/REJECTION | DR. BY DATE CRITERIA, CORRELATION OF TEST EQUIPMENT WITH KNOWLES 1$ ALSO REQUIRED FOR ELIMINATION OF EQUIPMENT AND TEST METHOD VARIATION MMM 9-12-05 KNOWLES ELECTRONICS orn ITASCA, ILLINOIS U.S.A. me RECEIVER ED-29689-000 | s2 2-1-0 PERFORMANCE SPECIFICATION SHT 2.1 GJP 9-13-05