F-214 MEC8-110-02-L-DV-A MEC8-140-02-L-DV-A MEC8-120-02-L-DV-A (0,80 mm) .0315" MEC8-DV SERIES VERTICAL MICRO EDGE CARD SOCKET Mates with (1,60 mm) .062" thick card SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MEC8-DV Insulator Material: Black LCP Contact Material: Phosphor Bronze Plating: Au or Sn over 50" (1,27 m) Ni Operating Temp Range: -55C to +125C Insertion Depth: (4,22 mm) .166" to (5,66 mm) .223" Current Rating: 1.8 A per pin (6 adjacent pins powered) Voltage Rating: 185 VAC RoHS Compliant: Yes Processing: Lead-Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (10-50) (0,15 mm) .006" max (60-70) Mates with: (1,60 mm) .062" thick cards APPLICATIONS -EM to -DV -DV to -DV MEC8-DV Rated @ 3dB Insertion Loss* 8,65 mm Stack Height Single-Ended Signaling 7.0 GHz / 14 Gbps Differential Pair Signaling 7.0 GHz / 14 Gbps *Performance data includes effects of a non-optimized PCB. Complete test data available at www.samtec.com?MEC8-DV or contact sig@samtec.com MEC8 Variety of lead counts 1 POSITIONS PER ROW (0,80 mm) .0315" pitch PLATING OPTION 02 DV OTHER OPTION RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality -A 10, 20, 30, 40, 50, 60, 70 = Alignment Pin -L = 10" (0,25 m) Gold on contact, Matte Tin on tail -K ALSO AVAILABLE (MOQ Required) POSITIONS PER ROW No. of Positions x (0,80) .0315 + (7,80) .307 * 1 mm mating card thickness option * Locking clip (Manual placement required) B A Contact Samtec. (2,00) .0787 OTHER SOLUTIONS (1,80) .071 * Right Angle * Edge Mount See www.samtec?MEC8-RA or www.samtec?MEC8-EM Note: While optimized for 50 applications, this connector with alternative signal/ground patterns may also perform well in certain 75 applications. Contact Samtec for further information. Note: Some sizes, styles and options are non-standard, non-returnable. A B 40 (18,90) (36,60) .744 1.441 50 (22,90) (44,60) .902 1.756 60 (26,90) (52,60) 1.059 2.071 70 (30,90) (60,60) 1.217 2.386 (4,00) .157 No. of Positions x (0,80) .0315 + (4,60) .181 02 (7,00) .276 01 No. of Positions x (0,80) .0315 + (1,40) .055 (8,50) .335 (8,65) .341 (0,80) .0315 (8,80) .346 WWW.SAMTEC.COM -A OPTION (1,35) .053 (0,90) .035 DIA = (5,50 mm) .217" DIA Polyimide Pick & Place Pad