IDT54/74FCT139T/AT/CT FAST CMOS DUAL 1-OF-4 DECODER WITH ENABLE MILITARY AND COMMERCIAL TEMPERATURE RANGE FAST CMOS 1-OF-4 DECODER WITH ENABLE DESCRIPTION: FEATURES: - - - - - - - - - - IDT54/74FCT139T/AT/CT Std., A and C speed grades Low input and output leakage 1 A (max.) Extended commercial range of -40C to +85C CMOS power levels True TTL input and output compatibility * VOH = 3.3V (typ.) * VOL = 0.3V (typ.) High drive outputs (-15mA IOH, 48mA IOL) Meets or exceeds JEDEC standard 18 specifications Product available in Radiation Tolerant and Radiation Enhanced versions Military product compliant to MIL-STD-883, Class B and DESC listed (dual marked) Available in DIP, SOIC, QSOP, CERPACK and LCC packages The IDT54/74FCT139T/AT/CT are dual 1-of-4 decoders built using an advanced dual metal CMOS technology. These devices have two independent decoders, each of which accept two binary weighted inputs (A0A1) and provide four mutually exclusive active low outputs (O0-O3). Each decoder has an active low enable (E). When E is high, all outputs are forced high. FUNCTIONAL BLOCK DIAGRAM Ea O 0a A 0a O 1a O 2a Eb A 1a O 3a O 0b A 0b O 1b MILITARY AND COMMERCIAL TEMPERATURE RANGE O 2b A 1b O 3b SEPTEMBER 1999 1 c 1999 Integrated Device Technology, Inc. DSC-2566/5 IDT54/74FCT139T/AT/CT FAST CMOS DUAL 1-OF-4 DECODER WITH ENABLE MILITARY AND COMMERCIAL TEMPERATURE RANGE A 0a 2 15 Eb 3 O 0a 4 O 1a 5 O 2a 6 O 3a GND P16-1 D16-1 SO16-1 SO16-7 SO16-8 E16-1 14 A 0b 13 A 1b 12 O 0b 11 O 1b 7 10 O 2b 8 9 O 3b 4 O 0a 5 NC 6 O 1a O 2a 20 Eb V CC 2 NC 3 19 1 18 A 0b 17 A 1b 16 NC 7 15 O 0b 8 14 O 1b L20-2 9 O 3a A 1a A 1a DIP/ SOIC/ QSOP/ CERPACK TOP VIEW 10 11 12 13 O 2b V CC O 3b 16 NC 1 GND Ea Ea IND EX A 0a PIN CONFIGURATION LCC TOP VIEW ABSOLUTE MAXIMUM RATINGS(1) PIN DESCRIPTION Symbol VTERM(2) Rating Terminal Voltage with Respect to GND Max. -0.5 to +7 Unit V Pin Names A0, A1 VTERM(3) Terminal Voltage with Respect to GND -0.5 to VCC+0.5 V E TSTG Storage Temperature -65 to +150 C O0 - O3 IOUT DC Output Current -65 to +120 mA Description Address Inputs Enable Input (Active LOW) Outputs (Active LOW) 8T-link NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. FUNCTION TABLE 2. Inputs and Vcc terminals only. 3. Outputs and I/O terminals only. CAPACITANCE (TA = +25OC, f = 1.0MHz) Symbol CIN Parameter(1) Input Capacitance Conditions VIN = 0V Typ. 6 Max. 10 COUT Output Capacitance VOUT = 0V 8 12 E Inputs A0 A1 O0 Outputs H X X H H H H L L L L H H H L H L H L H H L L H H H L H L H H H H H L NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Unit pF pF 8T-link NOTE: 1. This parameter is measured at characterization but not tested. 2 (1) O1 O2 O3 IDT54/74FCT139T/AT/CT FAST CMOS DUAL 1-OF-4 DECODER WITH ENABLE MILITARY AND COMMERCIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Commercial: TA = -40C to +85C, VCC = 5.0V 5%; Military: TA = -55C to +125C, VCC = 5.0V 10% Symbol VIH Parameter Input HIGH Level Test Conditions(1) Guaranteed Logic HIGH Level VIL Input LOW Level Guaranteed Logic LOW Level IIH Input HIGH Current(4) VCC = Max. VI = 2.7V IIL Input LOW Current(4) VCC = Max. VI = 0.5V -- II Input HIGH Current(4) VCC = Max., VI = VCC (Max.) -- VIK Clamp Diode Voltage VCC = Min., IN = -18mA -- IOS Short Circuit Current VCC = Max.(3), VO = GND -60 VOH Output HIGH Voltage VCC = Min. VIN = VIH or VIL VOL Output LOW Voltage VH Input Hysteresis ICC Quiescent Power Supply Current IOH = -6mA MIL IOH = -8mA COM'L IOH = -12mA MIL IOH = -15mA COM'L IOL = 32mA MIL IOL = 48mA COM'L VCC = Min. VIN = VIH or VIL -- VCC = Max. VIN = GND or VCC Typ.(2) -- Max. -- -- -- 0.8 V -- -- 1 A -- 1 A -- 1 A -0.7 -1.2 V -120 -225 mA 2.4 3.3 -- V 2 3 -- V -- 0.3 0.5 V -- 200 -- mV -- 0.01 1 mA Min. 2 NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5.0V, +25C ambient and maximum loading. 3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second. 4. The test limit for this parameter is 5A at TA = -55C. 3 Unit V IDT54/74FCT139T/AT/CT FAST CMOS DUAL 1-OF-4 DECODER WITH ENABLE MILITARY AND COMMERCIAL TEMPERATURE RANGE POWER SUPPLY CHARACTERISTICS Symbol ICC ICCD Parameter Quiescent Power Supply Current TTL Inputs HIGH Dynamic Power Supply Current(4) IC Total Power Supply Current(6) Test Conditions(1) VCC = Max. VIN = 3.4V(3) VCC = Max. Outputs Open One Bit Toggling 50% Duty Cycle VCC = Max. Outputs Open fo = 10MHz 50% Duty Cycle One Input and One Output Toggling VCC = Max. Outputs Open fo = 10MHz 50% Duty Cycle One Input Toggling on Each Decoder Two Outputs Toggling Min. -- Typ.(2) 0.5 Max. 2 Unit mA VIN = VCC VIN = GND -- 0.15 0.3 mA/ MHz VIN = VCC VIN = GND -- 1.5 4 mA VIN = 3.4V VIN = GND -- 1.8 5 VIN = VCC VIN = GND -- 3 7(5) VIN = 3.4V VIN = GND -- 3.5 9(5) NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5.0V, +25C ambient. 3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ICC DHNT + ICCD (fONO) ICC = Quiescent Current ICC = Power Supply Current for a TTL High Input (VIN = 3.4V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fO = Output Frequency NO = Number of Outputs at fO All currents are in milliamps and all frequencies are in megahertz. SWITCHING CHARACTERISTICS OVER OPERATING RANGE FCT139T Com'l. Parameter tPLH tPHL tPLH tPHL Description Propagation Delay A0 or A1 to On Propagation Delay E to On FCT139AT Mil. Max. Min. (2) Com'l. Mil. Max. Min. (2) Mil. Min. (2) CL = 50pF RL = 500 1.5 9 1.5 12 1.5 5.9 1.5 7.8 1.5 5 1.5 Max. Unit 6.2 ns 1.5 8 1.5 9 1.5 5.5 1.5 7.2 1.5 4.8 1.5 5.8 4 Max. Min. (2) Com'l. Condition(1) NOTES: 1. See test circuit and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. Max. Min. (2) FCT139CT Max. Min. (2) ns IDT54/74FCT139T/AT/CT FAST CMOS DUAL 1-OF-4 DECODER WITH ENABLE MILITARY AND COMMERCIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS SWITCH POSITION TEST CIRCUITS FOR ALL OUTPUTS V CC Test 7.0V Switch Open Drain 500 Disable Low V OUT V IN Pulse Generator D.U.T. All Other Tests 50pF R Closed Enable Low T C Open 8-link 500 DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. L O ctal lin k PULSE WIDTH SET-UP, HOLD, AND RELEASE TIMES 3V 1.5V 0V 3V 1.5V 0V DATA INPUT tH t SU TIM ING INPUT ASYNCHRONOUS C ONTROL PRES ET CLEAR ETC. SYNCHRO NOUS CONTRO L PRES ET CLEAR CLOCK ENABLE ETC. t REM t SU LO W -HIGH-LOW PULSE 1.5V tW 3V 1.5V 0V HIGH-LOW -HIGH PULSE 1.5V 3V 1.5V 0V tH O ctal lin k O ctal lin k PROPAGATION DELAY ENABLE AND DISABLE TIMES ENAB LE SAM E PHASE INPUT TRANSITION t PLH t PH L OUTPUT t PLH OPPOSITE P HASE INPUT TRANSITION t PH L 3V 1.5V 0V DISA BLE 3V CO NTROL INPUT 1.5V t PZL V OH 1.5V V OL OUTPUT NO RM A LLY LO W 3V 1.5V 0V SW ITCH CLOSE D O ctal lin k SW ITCH OPEN 3.5V 3.5V 1.5V 0.3V t PZH OUTPUT NO RM A LLY HIGH 0V t PLZ V OL t PHZ 0.3V V OH 1.5V 0V 0V O ctal lin k NOTES: 1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH 2. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2.5ns; tR 2.5ns 5 IDT54/74FCT139T/AT/CT FAST CMOS DUAL 1-OF-4 DECODER WITH ENABLE MILITARY AND COMMERCIAL TEMPERATURE RANGE ORDERING INFORMATION IDT XX Tem p. Range FCT X Fam ily XXXX Device Type X Package X Process Blank B C om m ercial M IL-STD-883, Class B P D SO DC L E Q Plastic DIP (P16-1) CERDIP (D16-1) Sm all Outline IC (300 m il) (SO16-1) Sm all Outline IC (150 m il) (SO16-8) Leadless Chip C arrier (L20-2) CERPACK (E16-1) Quarter-size Sm all Outline Package (SO16-7) 139T 139AT 139CT Dual 1-of-4 Decoder Blank High Drive 54 74 - 55C to +1 25C - 40C to +8 5C CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com* *To search for sales office near you, please click the sales button found on our home page or dial the 800# above and press 2. The IDT logo is a registered trademark of Integrated Device Technology, Inc. 6