To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. Renesas Technology Home Page: http://www.renesas.com Renesas Technology Corp. Customer Support Dept. April 1, 2003 Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. HD29C3487 Quadruple Differential Line Drivers With 3 State Outputs ADE-205-587 (Z) 1st. Edition Dec. 2000 Description The HD29C3487 features quadruple differential line drivers which satisfy the requirements of EIA standard RS-422A. This device is designed to provide differential signals with high current capability on bus lines. The enable input at low level permits the relate output in high impedance state. The output circuit has active pull up and pull down and is capable of sinking or sourcing 20 mA. Features * * * * * * * * * * TTL input compatibility Propagation delay time: 6 ns typ Output to output skew: 0.5 ns typ High output impedance in power off conditions Meets EIA standard RS-422A Operates from a single 5 V supply Three state outputs Low power dissipation with CMOS process Power up and power down protection Pin to pin compatible with HD293487 HD29C3487 Pin Arrangement 1A 1 16 VCC 1Y 2 15 4A 1Z 3 14 4Y 1, 2 Output Enable 13 4Z 4 3,4 Output 2Z 5 12 2Y 6 11 3Z 2A 7 10 3Y GND 8 9 3A Enable (Top view) Function Table Input A Enables Outputs G Y Z H H H L L H L H X L Z Z H L Z X 2 : : : : High level Low level High impedance Irrelevant HD29C3487 Absolute Maximum Ratings (Ta = 25C) Item Symbol Ratings Unit Supply Voltage* VCC -0.5 to 7.0 V Input Voltage VIN -1.5 to VCC + 1.5 V Output Voltage VOUT -0.5 to VCC + 0.5 V Power Dissipation PT 500 mW Tstg -65 to 150 C Tlead 260 C Output Current IOUT 150 mA Supply Current ICC 150 mA 2 Storage Temperature Lead Temperature* 3 Notes: 1. The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 2. The value is defined as of ground terminal . 3. The value at 1.6 mm away from the package within 10 second, when soldering. Recommended Operating Conditions (Ta = -40C to +85C) Item Symbol Min Typ Max Unit Supply Voltage VCC 4.5 5.0 5.5 V Input Voltage VIN 0 -- VCC V Output Voltage VOUT 0 -- VCC V Ta -40 25 85 C t r, t f -- -- 500 ns Operating Temperature 1 Input Rise/Fall Time* Note: 1. This item guarantees maximum limit when one input switches. 3 HD29C3487 Logic Diagram 1Y 1A 1Z 1,2 Output Enable 2Y 2A 2Z 3Y 3A 3Z 3,4 Output Enable 4Y 4A 4Z Electrical Characteristics (Ta = -40C to +85C) Item Symbol Min Typ*1 Max Unit Input Voltage VIH 2.0 -- -- V VIL -- -- 0.8 V VOH 2.4 3.4 -- V VIN = VIH or VIL, IOH = -20 mA VOL -- 0.2 0.4 V VIN = VIH or VIL, IOL = 20 mA VT 2.0 3.1 -- V RL = 100 Output Voltage Differential Output Voltage Conditions VT Change In Magnitude Of Differential Output Voltage IV TI - IVTI Common Mode Output Voltage VOS -- -- 0.4 V -- 1.8 3.0 V 50 50 VOS Magnitude Of Common Mode Output Voltage IV OS - VOSI -- -- 0.4 V Input Current I IN -- -- 1.0 A VIN = VCC, GND, VIH or VIL Supply Current I CC -- 200 500 A I OUT = 0 mA, VIN = VCC or GND -- 0.8 2.0 mA I OUT = 0 mA, VIN = 2.4 V or 0.5 V -- 0.5 5.0 A VOUT = VCC or GND, G = VIL, G = VIH -30 -- -150 mA VIN = VCC or GND Output Current With Power Off I OFF -- -- 100 VCC = 0 V, VOUT = 6 V I OFF -- -- -100 mA I CC* Off State Output Current Short Circuit Output Current 2 I OZ I SC* 3 mA Notes: 1. All typical values are at V CC = 5 V, Ta = 25C. 2. 1 input: V IN = 2.4 V or 0.5 V, other inputs: VIN = VCC or GND 4 VCC = 0 V, VOUT = -0.25 V HD29C3487 3. Not more than one output should be shorted at a time and duration of the short circuit should not exceed one second. Switching Characteristics (Ta = -40C to +85C, VCC = 5 V 10%) Item Symbol Min Typ*1 Max Unit Conditions Propagation Delay Time t PLH 2.0 6.0 11.0 ns Test Circuit (1) t PHL 2.0 6.0 11.0 ns Output To Output Skew Skew -- 0.5 2.0 ns Differential Output Transition t TLH -- 6.0 10.0 ns Time t THL -- 6.0 10.0 ns Output Enable Time t ZL -- 11.0 19.0 ns t ZH -- 13.0 21.0 ns t LZ -- 5.0 9.0 ns t HZ -- 7.0 11.0 ns Power Dissipation Capacitance CPD -- 50.0 -- pF Input Capacitance -- 6.0 -- pF Output Disable Time CIN Test Circuit (3) Test Circuit (2) Test Circuit 1 VCC Input Pulse Generator Output A Zout = 50 C2 Y C1 Z C3 VCC R1 R3 1.5 V S1 OPEN R2 Output Note: 1. C1, C2 and C3 (40 pF) includes probe and jig capacitance. R1 = R2 = 50 , R3 = 500 5 HD29C3487 Waveforms 1 tr tf 90 % 1.3 V Input A 3V 90 % 1.3 V 10 % 10 % t PLH 0V t PHL VOH Output Y 1.3 V 1.3 V VOL t PHL t PLH VOH 1.3 V Output Z 1.3 V VOL VOH Output Y 50 % 50 % VOL Skew Skew VOH Output Z 50 % 50 % VOL Notes: 6 1. 2. t r 6 ns, tf 6 ns Input waveforms: PRR = 1 MHz, duty cycle 50% HD29C3487 Test Circuit 2 VCC Output VCC Input A C2 Y C1 Z C3 Pulse Generator Zout = 50 Note: 1. R1 R3 1.5 V S1 CLOSED R2 Output C1, C2 and C3 (40 pF) includes probe and jig capacitance. R1 = R2 = 50 , R3 = 500 7 HD29C3487 Waveforms 2 tr tf 90 % 1.3 V Output Enable 90 % 1.3 V 10 % 10 % t LZ 3V 0V t ZL 1.5 V Output Y (Input A : VCC ) VOL + 0.3 V t HZ 0.8 V t ZH VOL VOH Output Y (Input A : VCC ) VOH- 0.3 V 2.0 V 1.5 V t HZ t ZH VOH Output Y (Input A : GND) VOH- 0.3 V t LZ Output Z (Input A : GND) 2.0 V t ZL 1.5 V 1.5 V VOL + 0.3 V 0.8 V VOL Notes: 8 1. 2. t r 6 ns, tf 6 ns Input waveforms: PRR = 1 MHz, duty cycle 50 HD29C3487 Test Circuit 3 Input A Pulse Genelator Output C1 Z *1 R1 R3 C2 Y 1.5 V S1 OPEN C3 R2 VCC Ach Bch Oscilloscope Bch Invert Ach Add Bch Note: 1. C1, C2 and C3 (40 pF) includes probe and jig capacitance. R1 = R2 = 50 , R3 = 500 Waveforms-3 tr tf 90 % Input A 10 % 10 % 90 % Output (Differential) 1. 2. 0V 90 % 10 % 10 % t TLH Notes: 3V 90 % t THL t r 6 ns, tf 6 ns Input waveforms: PRR = 1 MHz, duty cycle 50% 9 HD29C3487 Package Dimensions Unit: mm 19.20 20.00 Max 6.30 9 1 7.40 Max 16 8 1.3 0.48 0.10 7.62 2.54 Min 5.06 Max 2.54 0.25 0.51 Min 1.11 Max + 0.13 0.25 - 0.05 0 - 15 Hitachi Code JEDEC EIAJ Mass (reference value) DP-16 Conforms Conforms 1.07 g Unit: mm 10.06 10.5 Max 9 1 8 1.27 *0.42 0.08 0.40 0.06 0.10 0.10 0.80 Max *0.22 0.05 0.20 0.04 2.20 Max 5.5 16 0.20 7.80 +- 0.30 1.15 0 - 8 0.70 0.20 0.15 0.12 M *Dimension including the plating thickness Base material dimension 10 Hitachi Code JEDEC EIAJ Mass (reference value) FP-16DA -- Conforms 0.24 g HD29C3487 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160 Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan. Colophon 2.0 11