®
1/8
Table 1: Main Features
DESCRIPTION
The Z01 series is suitable for general purpose AC
switching applications. They can be found in appli-
cations such as home appliances (electrovalve,
pump, door lock, small lamp control), fan speed
controllers,...
Different gate current sensitivities are available, al-
lowing optimized performances when controlled
directly from microcontrollers.
Symbol Value Unit
IT(RMS) 1A
VDRM/VRRM 600 to 800 V
IGT (Q1)3 to 25 mA
Z01
1A TRIACS
REV. 5February 2005
STANDARD
Table 2: Order Codes
Part Number Marking
Z01xxA See page table 8 on
page 7
Z01xxN
TO-92
(Z01xxA)
SOT-223
(Z01xxN)
A2
A1
G
GA2
A1
A2
A1
A2
Table 3: Absolute Maximum Ratings
Symbol Parameter Value Unit
IT(RMS) RMS on-state current
(full sine wave)
SOT-223 Ttab = 90°C
1A
TO-92 TL = 50°C
ITSM Non repetitive surge peak on-state
current (full cycle, Tj initial = 25°C)
F = 50 Hz t = 20 ms 8 A
F = 60 Hz t = 16.7 ms 8.5
I²tI
²t Value for fusing tp = 10 ms 0.35 A²s
dI/dt Critical rate of rise of on-state cur-
rent IG = 2 x IGT , tr 100 ns F = 120 Hz Tj = 125°C 20 A/µs
IGM Peak gate current tp = 20 µs Tj = 125°C 1A
PG(AV) Average gate power dissipation Tj = 125°C 1W
Tstg
Tj
Storage junction temperature range
Operating junction temperature range
- 40 to + 150
- 40 to + 125 °C
Z01
2/8
Tables 4: Electrical Characteristics (Tj = 25°C, unless otherwise specified)
Table 5: Static Characteristics
Table 6: Thermal resistances
Symbol Test Conditions Quadrant Z01 Unit
03 07 09 10
IGT (1)
VD = 12 V RL = 30 I - II - III - IV MAX. 3
5
5
7
10
10
25
25 mA
VGT ALL MAX. 1.3 V
VGD
VD = VDRM RL = 3.3 k
Tj = 125°C ALL MIN. 0.2 V
IH (2) IT = 50 mA MAX.7 101025mA
ILIG = 1.2 IGT
I - III - IV MAX. 7 101525
mA
II 15 20 25 50
dV/dt (2) VD = 67 %VDRM gate open Tj = 110°C MIN. 10 20 50 100 V/µs
(dI/dt)c (2) (dV/dt)c = 0.44 A/ms Tj = 110°C MIN. 0.5 1 2 5 A/ms
Symbol Test Conditions Value Unit
VTM (2) ITM = 1.4 A tp = 380 µs Tj = 25°C MAX. 1.56 V
Vto (2) Threshold voltage Tj = 125°C MAX. 0.95 V
Rd (2) Dynamic resistance Tj = 125°C MAX. 400 m
IDRM
IRRM
VDRM = VRRM
Tj = 25°C
MAX.
A
Tj = 125°C 0.5 mA
Note 1: minimum IGT is guaranted at 5% of IGT max.
Note 2: for both polarities of A2 referenced to A1.
Symbol Parameter Value Unit
Rth(j-t) Junction to tab (AC) SOT-223 25
°C/W
Rth(j-I) Junction to lead (AC) TO-92 60
Rth(j-a)
Junction to ambient S = 5 cm²SOT-223 60 °C/W
TO-92 150
S = Copper surface under tab.
Z01
3/8
Figure 1: Maximum power dissipation versus
RMS on-state current (full cycle)
Figure 2: RMS on-state current versus case
temperature (full cycle)
Figure 3: RMS on-state current versus ambient
temperature (full cycle)
Figure 4: Relative variation of thermal
impedance versus pulse duration
Figure 5: Relative variation of gate trigger
current, holding current and latching current
versus junction temperature (typical values)
Figure 6: Surge peak on-state current versus
number of cycles
P(W)
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.00
0.25
0.50
0.75
1.00
1.25
1.50
I (A)
T(RMS)
0 25 50 75 100 125
0.0
0.2
0.4
0.6
0.8
1.0
1.2
I (A)
T(RMS)
R=
(SOT-223)
th(j-a) Rth(j-t)
R=
(TO-92)
th(j-a) Rth(j-l)
T (°C)
amb
I (A)
T(RMS)
0 25 50 75 100 125
0.0
0.2
0.4
0.6
0.8
1.0
1.2
R = 60°C/W
(SOT-223)
th(j-a)
R = 150°C/W
(TO-92)
th(j-a)
T or (°C)
lTtab
K=[Z /R
th(j-a) th(j-a)]
1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
0.01
0.10
1.00
t (s)
p
Z01xxA
Z01xxN
-40 -20 0 20 40 60 80 100 120 140
0.0
0.5
1.0
1.5
2.0
2.5
I,I,I[T] /
GT H L j
I , I , I [T =25°C]
GT H L j
T (°C)
j
IGT
IH&I
L
1 10 100 1000
0
1
2
3
4
5
6
7
8
9
One cycle
t=20ms
I (A)
TSM
Number of cycles
Non repetitive
T initial = 25°C
j
Repetitive
T = 25°C
amb
Z01
4/8
Figure 7: Non-repetitive surge peak on-state
current for a sinusoidal pulse with width tp < 10 ms
and corresponding value of I2t
Figure 8: On-state characteristics (maximum
values)
Figure 9: Relative variation of critical rate of
decrease of main current versus (dV/dt)c
(typical values)
Figure 10: Relative variation of critical rate of
decrease of main current versus junction
temperature
Figure 11: SOT-223 Thermal resistance junction
to ambient versus copper surface under tab
(printed circuit board FR4, copper thickness:
35 µm)
0.01 0.10 1.00 10.00
0.1
1.0
10.0
100.0
t (ms)
p
I (A), I t (A s)
TSM 22
It
2
dI/dt limitation:
20A/µs
T initial = 25°C
j
ITSM
I (A)
TM
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1
1.0
10.0
V (V)
TM
T = max.
jTj
T = 25°C
j
T =max.
j
V =0.95 V
R =420 m
t0
d
0.1 1.0 10.0 100.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
Z0103
Z0107 Z0110
Z0109
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c
(dV/dt)c (V/µs)
0 25 50 75 100 125
0
1
2
3
4
5
6
(dI/dt)c [T ] / Specified]
j(dI/dt)c [Tj
T (°C)
j
R (°C/W)
th(j-a)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
S(cm²)
Z01
5/8
Figure 12: Ordering Information Scheme
Table 7: Product Selector
Part Number Voltag e Sensitivity Type Package
600 V 700 V 800 V
Z0103MA X 3 mA Standard TO-92
Z0103MN X 3 mA Standard SOT-223
Z0103SA X 3 mA Standard TO-92
Z0103SN X 3 mA Standard SOT-223
Z0103NA X 3 mA Standard TO-92
Z0103NN X 3 mA Standard SOT-223
Z0107MA X 5 mA Standard TO-92
Z0107MN X 5 mA Standard SOT-223
Z0107SA X 5 mA Standard TO-92
Z0107SN X 5 mA Standard SOT-223
Z0107NA X 5 mA Standard TO-92
Z0107NN X 5 mA Standard SOT-223
Z0109MA X 10 mA Standard TO-92
Z0109MN X 10 mA Standard SOT-223
Z0109SA X 10 mA Standard TO-92
Z0109SN X 10 mA Standard SOT-223
Z0109NA X 10 mA Standard TO-92
Z0109NN X 10 mA Standard SOT-223
Z0110MA X 25 mA Standard TO-92
Z0110MN X 25 mA Standard SOT-223
Z0110SA X 25 mA Standard TO-92
Z0110SN X 25 mA Standard SOT-223
Z0110NA X 25 mA Standard TO-92
Z0110NN X 25 mA Standard SOT-223
Z 01 03 M A 1AA2[BLANK]
Triac series
Current
Sensitivity
Voltage
Package
Packing mode
01 = 1A
03 = 3mA
07 = 5mA
09 = 10mA
10 = 25mA
M = 600V
S = 700V
N = 800V
A = TO-92
N = SOT-223
1AA2 = TO-92 Bulk (preferred)
2AL2 = TO-92 Ammopack
5AL2 = TO-92 Tape & reel
5AA4 = SOT-223 Tape & reel
Z01
6/8
Figure 13: SOT-223 Package Mechanical Data
Figure 14: SOT-223 Foot Print Dimensions
(in millimeters)
A
A1
e1
D
B1
HE
e
12
4
3
B
Vc
3.25
1.32
7.805.16
1.32
2.30 0.95
REF.
DIMENSIONS
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.80 0.071
A1 0.02 0.001
B 0.60 0.70 0.80 0.024 0.027 0.031
B1 2.90 3.00 3.10 0.114 0.118 0.122
c 0.24 0.26 0.32 0.009 0.010 0.013
D 6.30 6.50 6.70 0.248 0.256 0.264
e 2.3 0.090
e1 4.6 0.181
E 3.30 3.50 3.70 0.130 0.138 0.146
H 6.70 7.00 7.30 0.264 0.276 0.287
V10° max
Z01
7/8
Figure 15: TO-92 Package Mechanical Data
D
F
a
E
B
A
C
REF.
DIMENSIONS
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.35 0.053
B 4.70 0.185
C 2.54 0.100
D4.40 0.173
E 12.70 0.500
F 3.70 0.146
a 0.50 0.019
Table 8: Ordering Information
Ordering type Marking Weight Base
quantity Delivery mode
Z01xxyA 1AA2 Z01xxyA 0.2 g 2500 Bulk
Z01xxyA 2AL2 Z01xxyA 0.2 g 2000 Ammopack
Z01xxyA 5AL2 Z01xxyA 0.2 g 2000 Tape & reel
Z0103yN 5AA4 Z3y 0.12 g 1000 Tape & reel
Z0107yN 5AA4 Z7y 0.12 g 1000 Tape & reel
Z0109yN 5AA4 Z9y 0.12 g 1000 Tape & reel
Note: xxx = sensitivity, y = voltage
Table 9: Revision History
Date Revision Description of Changes
Oct-2001 4 Last update.
10-Feb-2005 5 Package: TO-92 tape & reel delivery mode 5AL2 added.
Z01
8/8
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners
© 2005 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com