MC13-SERIES Features (1) 2 mounting options : MC13** Screw mounting type MC13**DIN Din rail mounting type (2) Worldwide compliance : Voltage rating 3 phase AC500V, 10, 20, 30A (3) Safe design : Terminal with cover, Low leakage current (4) Environmental compliance : Lead free soldering Safety standard EN133200 UL1283 CSA Std. C22. 2 No. 8 EN133200 Specifications 12 Vibration 13 Weight MC13** MC13**DIN MC1306 MC1306DIN MC1310 MC1320 MC1330 MC1310DIN MC1320DIN MC1330DIN 500V (50/60Hz) 6A 10A 20A 30A 2000V (100mA) at 25C, 70% RH 100M min at 25C, 70% RH 5.0mA max 90m max 68m max 23m max 11m max 30C max -25C ~ +85C 30% ~ 95% RH (No Dewdrop) -40C ~ +85C 10% ~ 95% RH (No Dewdrop) At no operating 10~55~10Hz, Amplitude (Sweep for 1min) 0.825mm constant (Maximum 49.0m/s 2)X,Y,Z 1hour each At no operating 55~250~55Hz, Acceleration (Sweep for 1min) 19.6m/s 2, X,Y,Z 1hour each At no operating 10~55~10Hz, Acceleration (Sweep for 1min) 9.8m/s 2, X,Y,Z 1hour each 600g =50C For Ta>50C derate according to the derating curve shown on the right. (Note) : Value for Ta < Derating Current (%) Circuit Temperature (C) Terminal Explanation Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. Contact us about delivery before ordering. 163 EMI Noise filter Model STD type Items DIN type 1 Rated Voltage (AC) 2 Rated Current (*1) 3 Test Voltage (terminals to base plate, 1min AC) 4 Isolation Resistance (terminals to base plate, 500VDC) 5 Leakage Current 500V,60Hz 6 DC Resistance (three lines) 7 Temperature Rise 8 Operating Temperature 9 Operating Humidity 10 Storage Temperature 11 Storage Humidity MC13-SERIES MC13** (Unit: mm) EMI Noise filter MC13**DIN (Unit: mm) MC13**DIN explanation *Mounting *Ground MC13**DIN could be mounted on 35mm wide (TS35 type) Din-rail.For mounting, put the part (A) of the unit over the top hat rail and push forward like (B), so that the rail stopper is firmly held on the Din-rail. For unmounting, put a screw driver int the part (C) and lift it up to remove the unit. A B C 164 Do not earth whth Din-rail. Earth directly from the ground terminal of MC13**DIN. MC13-SERIES CHARACTERISTICS Attenuation Characteristic (typical) MC1306 MC1310 EMI Noise filter 165 MC13-SERIES CHARACTERISTICS Attenuation Characteristic (typical) EMI Noise filter MC1320 166 MC1330