ECLDL 16-pin DIP 10k ECL Delay Lines n 10k ECL buffered input and output in 16-pin transfer-molded n 5-tap line provides delays from 5 ns to 500 ns. n Temperature range -30 to +85oC. n Transfer molded--reliable. n Fanout: 83 ECL loads. n Military models with temperature range -55 to +125o C and DIP. ceramic package IC. Add suffix "M" to part mumber. n Military models as above, but with ceramic package IC screened to MIL- STD-883C. Add suffix "MX" to part number. n Military models as "MS" above, but with in-house burn-in and thermal shock, add suffix "MY". MODEL ECLDL ACTIVE DELAY LINES TAP D ELAYS (ns) TOO3 TOO 4 TOO5 Ou tpu t Rise Time (ns) 10 15 20 25 4 10 20 30 40 50 4 ECLDL075 15 30 45 60 75 5 ECLDL100 20 40 60 80 100 6 ECLDL125 25 50 75 100 125 7 ECLDL150 30 60 90 120 150 7 ECLDL200 40 80 120 160 200 8 ECLDL250 50 100 150 200 250 10 ECLDL300 60 120 180 240 300 15 ECLDL350 70 140 210 280 350 15 ECLDL400 80 160 240 320 400 15 ECLDL450 90 180 270 350 450 20 ECLDL500 100 200 300 400 500 20 TECHNITROL PAR T NO. TOO1 TOO 2 ECLDL025 5 ECLDL050 Delay Characteristics measured at Vcc = -5.2V + .01 Vdc. Ta = 25o C. Delay Tolerance +1.5 ns or 5%, whichever is greater. Delay time measured @ -1.3V. 500 linear FPM airflow and output terminated with 50 ohm to -2.0 Vdc. Rise time measured @ 20 to 80% of output pulse. For minimum input pulse width -- contact factory. TWO PEARL BUCK COURT l BRISTOL, PA 19007-6812 l TEL 215-781-6400 l FAX 215-781-6403 l www.pulsespecialty.com SCHEMATIC ECLDL 16-pin DIP MECHANICAL OUTLINE Notes n Only the pins specified in the schematics are provided with each package. n Pin numbers shown are for reference only and are not necessarily marked on unit. n Lead material is electro tin plated (alloy 42) or solder dipped. n All specifications are subject to change without notice. TWO PEARL BUCK COURT l BRISTOL, PA 19007-6812 l TEL 215-781-6400 l FAX 215-781-6403 l www.pulsespecialty.com