Sil-Pad 900S (R) High Performance Insulator for Low-Pressure Applications Features and Benefits TYPICAL PROPERTIES OF SIL-PAD 900S PROPERTY Color * Thermal impedance: 0.61C-in2/W (@50 psi) * Electrically isolating * Low mounting pressures * Smooth and highly compliant surface * General-purpose thermal interface material solution IMPERIAL VALUE Pink METRIC VALUE Pink Reinforcement Carrier Fiberglass Fiberglass -- Thickness (inch) / (mm) 0.009 0.229 ASTM D374 Hardness (Shore A) 92 92 ASTM D2240 Elongation (%45 to Warp and Fill) 20 20 ASTM D412 1300 9 ASTM D412 -76 to 356 -60 to 180 -- 5500 5500 ASTM D149 Tensile Strength (psi) / (MPa) Continuous Use Temp (F) / (C) ELECTRICAL Dielectric Breakdown Voltage (Vac) Type 3 Electrodes 8300 8300 ASTM D149 Dielectric Constant (1000 Hz) 6.0 6.0 ASTM D150 Volume Resistivity (Ohm-meter) 1010 1010 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) 1.6 1.6 ASTM D5470 THERMAL PERFORMANCE vs PRESSURE Pressure (psi) The true workhorse of the Sil-Pad product family, Sil-Pad 900S thermally conductive insulation material, is designed for a wide variety of applications requiring high thermal performance and electrical isolation.These applications also typically have low mounting pressures for component clamping. TEST METHOD Visual 10 25 50 100 200 TO-220 Thermal Performance (C/W) 3.96 3.41 2.90 2.53 2.32 Thermal Impedance (C-in2/W) (1) 0.95 0.75 0.61 0.47 0.41 1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Typical Applications Include: * Power supplies * Automotive electronics * Motor controls * Power semiconductors Sil-Pad 900S material combines a smooth and highly compliant surface characteristic with high thermal conductivity.These features optimize the thermal resistance properties at low pressures. Configurations Available: * Sheet form, die-cut parts and roll form * With or without pressure sensitive adhesive Building a Part Number 00 Standard Options - ACME 951753 Rev B Section E - AC - Section D 0.009 Section C - Section B SP900S Section A Applications requiring low component clamping forces include discrete semiconductors (TO-220,TO-247 and TO-218) mounted with spring clips. Spring clips assist with quick assembly and apply a limited amount of force to the semiconductor.The smooth surface texture of Sil-Pad 900S minimizes interfacial thermal resistance and maximizes thermal performance. NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. _ _ _ = Standard configuration dash number, 1212 = 12" x 12" sheets, 12/250 = 12" x 250' rolls, or 00 = custom configuration AC = Adhesive, one side 00 = No adhesive Standard thicknesses available: 0.009" SP900S = Sil-Pad 900S Material Note: To build a part number, visit our website at www.bergquistcompany.com. Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_SP_900S_12.08 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: SP900S-0.009-00-02 SP900S-0.009-00-05 SP900S-0.009-00-104 SP900S-0.009-00-105 SP900S-0.009-00-114 SP900S-0.009-00-25 SP900S-0.009-00-43 SP900S-0.009-00-54 SP900S-0.009-00-58 SP900S-0.009-00-90 SP900S-0.009-AC-05 SP900S-0.009-AC-54 SP900S-0.009-AC-58 SP900S-0.009-AC-1212 SP900SAC-110 SP900S-0.009-00-1212 SP980-0.009-00-1212