HARTING Ha-VIS eCon Switches
Energy
Efficient
Ethernet
Voltage supply
Nominal voltage 24 VDC 48 VDC
Permissible voltage range
(
see table techn. characteristics)
9 VDC ... 60 VDC *
18 VDC ... 60 VDC **
Surge protection Yes
Reverse polarity proof Yes
Starting current 1.60 A 3.20 A
Overcurrent protection at input Yes (12 A for <=8 ports)/
(2 A for >8 ports)
Max. power consumption @ 24 VDC 2.21 W ... 9.17 W
Cross-section / Wire gauge 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
Connection type 3-pole, pluggable screwed contact
Pinout + / - /
Supply circuit (acc. to 60950) SELV (circuit breaker 10 A)
Ha-VIS eCon 3000
Full Gigabit Ethernet Basic
Target markets
Machinery &
Robotics Automation technology Industrial network
infrastructures
Wind Energy
Solar Energy Transportation Shipbuilding
■ Full gigabit Ethernet, non-blocking switch architecture acc.to IEEE 802.3
■Support of jumbo frames
■Variants with industrial temperature range of -40°C ... +70 °C
■Wide range voltage supply 24/48 VDC
■Surge protection and reverse polarity protection
■Minimum energy consumption due to Energy-Efficient Ethernet
■Optimised DIN rail bracket
2 to 16 Ethernet ports RJ45 and SC/LC (SFP)
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial Temp.: 0 °C ... +55 °C / Industrial Temp.: -40 °C ... +70 °C
General description
Technical characteristics
The Ha-VIS eCon 3000 Full Gigabit family of unmanaged Ethernet switches
is equipped with up to 16 gigabit Ethernet ports and allow for cost-efficient
and quick expansion and/or reconstruction of network infrastructures with
high bandwidth requirements. In this, all switches support extra-long
Ethernet frames (jumbo frames). The slender design of the switches enables
an extremely high packing density on the DIN rail. Various combinations of
variants with RJ45, fibre optic cables and SFP ports are available. Automatic
detection of the transmission rate (auto-negotiation) and of the wiring of the
twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug
& play. All variants are available with the temperature ranges „Industrial“
and „Commercial“.
Switch Features
Enclosures width 25 mm 38 mm
Number of ports 2, 5, 6, 7 16
Switching technology Store and Forward
Supported standards IEEE 802.3
Frame Size 10 kbytes 8 kBytes
MAC table size 8k entries
Packet buffer size 1 Mbit 512 kBytes
Non-blocking Yes
Quality of service Yes
Energy-Efficient Ethernet Yes
PROFINET compatible Yes
EthernetIP compatible Yes
Ethernet Ports 10BASE-Te / 100BASE-TX EEE / 1000BASE-T EEE
Connection type RJ45
Auto-negotiation Yes
Auto-polarity Yes
Auto-MDI(X) Yes
Transfer conditions Twisted Pair
Transfer speed 10 / 100 / 1000 Mbit/s
Transfer length 100 m (twisted pair, Cat 5)
Ethernet Ports 1000BASE-SX / 1000BASE-LX
Type of fibre Multimode (MM) Singlemode (SM)
Connection type SC Duplex
Transfer conditions FO
Wavelength 850 nm 1310 nm
Transfer speed 1000 Mbit/s
Transfer length 0.55 km 10 km
Output power -9.5 dBm ... -4 dBm -9.5 dBm ... -3 dBm
Input sensitivity ≤ -17 dBm ≤ -21 dBm
SFP ports
Transfer standard Depending on used SFP
Connection type Depending on used SFP, RJ45 or LC
Transfer conditions Depending on used SFP, TP or FO
Transfer speed Depending on used SFP, 100 or 1000 Mbit/s
Transfer length Depending on used SFP
HARTING Technology Group
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
ICPN-Service@harting.com | Service hotline: +49 5772 47-9479
Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior notication. The HARTING Technologiegruppe does not accept
any responsibility for possible errors or incompletions in this document. We reserve all the rights to
this document and the topics and illustrations contained within it. Copying, disclosure to third parties
or use of its content - even partially - is forbidden without the prior written consent of the HARTING
Technologiegruppe.
Enclosures
Enclosures width 25 mm 38 mm
Dimensions H x W x D
(without pluggable screw contact
and holding bracket)
142 mm x 25 mm x
107.5 mm
142 mm x 38 mm
x 107.5 mm
Weight 428 g ... 490 g 700 g
Type of installation 35 mm DIN rail acc. to EN 60 715
Material enclosures Anodised aluminium / Powder-coated
steel sheet
Protection degree (withplugged
screw contact) IP30
Protection class III
Status and diagnostic displays
Power („Pwr“) lights up green Supply voltage is applied
Link/Activity („L/A“) off No link
Link/Activity („L/A“) lights up green Link is active
Link/Activity ("L/A") flashes green Link is active and data is transferred
Link speed („Spd“) off 10 Mbit/s
Link speed („Spd“) lights up yellow 100 Mbit/s
Link speed („Spd“) lights up green 1000 Mbit/s
Approvals
CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT
EMC and environmental conditions
EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024)
Electrostatic discharge (ESD) EN 61 000-4-2
Electromagnetic field EN 61 000-4-3
Rapid transients (burst) EN 61 000-4-4
Surge voltages EN 61 000-4-5
Conducted interference voltages EN 61 000-4-6
EMC Interference emission (EN 61000-6-4, EN 55 032,
FCC CFR 47 Part 15)
Mechanical stability (EN 60721-3)
IEC 60068-2-6 Vibration
IEC 60068-2-6 Vibration resonance search
IEC 60068-2-27 Shock test
Included in delivery
■Pluggable screw contact for voltage supply
■ Assembly instruction
Ambient conditions
Commercial temperature range 0 °C ... +55 °C
Industrial temperature range -40 °C ... +70 °C
Storage temperature range -40 °C ... +85 °C
Relative humidity (operation) 0 % ... 95 % (not-condensing)
Relative humidity (storage and
transport) 0 % ... 95 % (not-condensing)
Air pressure (operation) 2000 m (795 hPa)
Drawings
* Permissible voltage range 9 VDC ... 60 VDC
** Permissible voltage range 18 VDC ... 60 VDC
*** Maritime Approvals on request
Ports / order information
Commercial Temp.: 0 °C ... +55 °C Industrial Temp.: -40 °C ... +70 °C
RJ45 SFP SC Enclosures
width
Current
consumption
@ 24 VDC
MTBF
in Mio. h Switch Part no. Switch Part no.
1 - 1x MM (0.55 km) 25 mm 92 mA* 2.13 Ha-VIS eCon 3011GB-AD 24 03 401 1110 Ha-VIS eCon 3011GBT-AD 24 03 401 1100
1 - 1x SM (10 km) 25 mm 92 mA* 2.13 Ha-VIS eCon 3011GB-AF 24 03 401 1210 Ha-VIS eCon 3011GBT-AF 24 03 401 1200
1 1 - 25 mm 90 mA** 0.95 Ha-VIS eCon 3011GB-AC 24 03 401 1310 Ha-VIS eCon 3011GBT-AC 24 03 401 1300
4 - 1x MM (0.55 km) 25 mm 155 mA* 2.15 Ha-VIS eCon 3041GB-AD 24 03 404 1110 Ha-VIS eCon 3041GBT-AD 24 03 404 1100
4 - 1x SM (10 km) 25 mm 155 mA* 2.15 Ha-VIS eCon 3041GB-AF 24 03 404 1210 Ha-VIS eCon 3041GBT-AF 24 03 404 1200
4 - 2x MM (0.55 km) 25 mm 182 mA* 2.08 Ha-VIS eCon 3042GB-AD 24 03 404 2110 Ha-VIS eCon 3042GBT-AD 24 03 404 2100
4 - 2x SM (10 km) 25 mm 182 mA* 2.08 Ha-VIS eCon 3042GB-AF 24 03 404 2210 Ha-VIS eCon 3042GBT-AF 24 03 404 2200
4 3 - 25 mm 172 mA** 0.99 Ha-VIS eCon 3043GB-AC 24 03 404 3310 Ha-VIS eCon 3043GBT-AC 24 03 404 3300
5 - - 25 mm 149 mA* 1.97 Ha-VIS eCon 3050GB-A 24 03 405 0010 Ha-VIS eCon 3050GBT-A 24 03 405 0000
5 - 1x MM (0.55 km) 25 mm 177 mA* 1.91 Ha-VIS eCon 3051GB-AD 24 03 405 1110 Ha-VIS eCon 3051GBT-AD 24 03 405 1100
5 - 1x SM (10 km) 25 mm 177 mA* 1.91 Ha-VIS eCon 3051GB-AF 24 03 405 1210 Ha-VIS eCon 3051GBT-AF 24 03 405 1200
5 2 - 25 mm 175 mA** 0.94 Ha-VIS eCon 3052GB-AC 24 03 405 2310 Ha-VIS eCon 3052GBT-AC 24 03 405 2300
6 - - 25 mm 172 mA* 1.76 Ha-VIS eCon 3060GB-A 24 03 006 0010 Ha-VIS eCon 3060GBT-A 24 03 006 0000
6 1 - 25 mm 178 mA** 0.89 Ha-VIS eCon 3061GB-AC 24 03 406 1310 Ha-VIS eCon 3061GBT-AC 24 03 406 1300
7 - - 25 mm 182 mA** 0.85 Ha-VIS eCon 3070GB-A 24 03 407 0010 Ha-VIS eCon 3070GBT-A 24 03 407 0000
16***
- - 38 mm 382 mA* 1.36 Ha-VIS eCon 3160GB-A 24 03 416 0010 Ha-VIS eCon 3160GBT-A 24 03 416 0000
Technical characteristics / order information
Copyright© 2014
HARTING Technology Group
All rights reserved
Date of issue 06.2018
ICPN Datasheet 0848/02
