Agilent HLMP-ABxx, HLMP-BBxx, HLMPADxx, HLMP-BDxx, HLMP-AGxx, HLMPBGxx, HLMP-ALxx, HLMP-BLxx, HLMP-AMxx, HLMP-BMxx T-13/4 (5 mm) Oval Precision Optical Performance AlInGaP and InGaN Lamps Data Sheet Description These Precision Optical Performance Oval LEDs are specifically designed for full color/video and passenger information signs. The oval shaped radiation pattern (35 x 70) and high luminous intensity ensure that these devices are excellent for wide field of view outdoor application where a wide viewing angle and readability in sunlight are essential. These lamps have very smooth, matched radiation patterns ensuring consistent color mixing in full color applications, message uniformity across the viewing angle of the sign. High efficiency LED material is used in these lamps: Aluminum Indium Gallium Phosphide (AlInGaP) for amber and red, and Indium Gallium Nitride (InGaN) for blue and green. Each lamp is made with an advance optical grade epoxy offering superior high temperature and high moisture resistance in outdoor applications. The package epoxy contains both UV-A and UV-B inhibitors to reduce the effects of long term exposure to direct sunlight. Designers can select parallel or perpendicular orientation. Both lamps are available in tinted version. Features * Well defined spatial radiation pattern * Viewing angles: Major axis 70 Minor axis 35 * High luminous output * Red and Amber Intensity are available for: AlInGaP (Bright) AlInGaP II (Brightest) * Colors: 472 nm blue 526 nm green 626 nm red 630 nm red 590 nm amber 592 nm amber * Superior resistance to moisture * UV resistant epoxy Benefits * Viewing angle designed for wide field of view application * Red, green, and blue radiation patterns matched for full color sign * Superior performance in outdoor environments Applications * Full color/video signs CAUTION: The blue and green LEDs are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Table 1. Device Selection Guide for AlInGaP II Part Number Color and Dominant Wavelength d (nm) Typ. Luminous Intensity, Iv (mcd) at 20 mA Min. HLMP-AD06-P00xx Red 630 HLMP-AD06-P0Txx Luminous Intensity, Iv (mcd) at 20 mA Max. Forward Voltage, Vf (V) Max. Leads with Stand-offs Leadframe Orientation Package Drawing 880 2.4 No Parallel A Red 630 880 2.6 No Parallel A HLMP-AD16-P00xx Red 630 880 2.4 Yes Parallel B HLMP-AD16-P0Txx Red 630 880 2.6 Yes Parallel B HLMP-AD16-RS0xx Red 630 1500 2500 2.6 Yes Parallel B HLMP-AD16-RSTxx Red 630 1500 2500 2.6 Yes Parallel B HLMP-AD16-RU0xx Red 630 1500 4200 2.4 Yes Parallel B HLMP-AD16-RUTxx Red 630 1500 4200 2.6 Yes Parallel B HLMP-AD16-ST0xx Red 630 1900 3200 2.4 Yes Parallel B HLMP-AD16-STTxx Red 630 1900 3200 2.6 Yes Parallel B HLMP-AL06-L00xx Amber 592 400 2.4 No Parallel A HLMP-AL06-L0Rxx Amber 592 400 2.6 No Parallel A HLMP-AL06-N00xx Amber 592 680 2.4 No Parallel A HLMP-AL06-N0Rxx Amber 592 680 2.6 No Parallel A HLMP-AL16-N00xx Amber 592 680 2.4 Yes Parallel B HLMP-AL16-N0Rxx Amber 592 680 2.6 Yes Parallel B HLMP-AL16-PSRxx Amber 592 880 2500 2.6 Yes Parallel B HLMP-AL16-QR0xx Amber 592 1150 1900 2.4 Yes Parallel B HLMP-AL16-QRRxx Amber 592 1150 1900 2.6 Yes Parallel B HLMP-BD06-P00xx Red 630 880 2.4 No Perpendicular C HLMP-BD06-P0Txx Red 630 880 2.6 No Perpendicular C HLMP-BD06-RS0xx Red 630 1500 2500 2.4 No Perpendicular C HLMP-BD06-RSTxx Red 630 1500 2500 2.6 No Perpendicular C HLMP-BD16-P00xx Red 630 880 2.4 Yes Perpendicular D HLMP-BD16-P0Txx Red 630 880 2.6 Yes Perpendicular D HLMP-BD16-RU0xx Red 630 1500 4200 2.4 Yes Perpendicular D HLMP-BD16-RUTxx Red 630 1500 4200 2.6 Yes Perpendicular D HLMP-BD16-ST0xx Red 630 1900 3200 2.4 Yes Perpendicular D HLMP-BD16-STTxx Red 630 1900 3200 2.6 Yes Perpendicular D HLMP-BL06-N00xx Amber 592 680 2.4 No Perpendicular C HLMP-BL06-N0Rxx Amber 592 680 2.6 No Perpendicular C HLMP-BL06-QRKxx Amber 592 1150 1900 2.4 No Perpendicular C HLMP-BL06-QRSxx Amber 592 1150 1900 2.6 No Perpendicular C HLMP-BL16-N00xx Amber 592 680 2.4 Yes Perpendicular D HLMP-BL16-N0Rxx Amber 592 680 2.6 Yes Perpendicular D HLMP-BL16-PS0xx Amber 592 880 2500 2.4 Yes Perpendicular D HLMP-BL16-PSRxx Amber 592 880 2500 2.6 Yes Perpendicular D 2 Table 2. LED Indicators Device Selection Guide for AlInGaP Part Number Color and Dominant Wavelength d (nm) Typ. Luminous Intensity, Iv (mcd) at 20 mA Min. HLMP-AG01-K00xx Red 626 310 HLMP-AG11-KN0xx Red 626 310 HLMP-AL01-K00xx Amber 590 310 HLMP-AL01-LP0xx Amber 590 400 HLMP-AL01-NR0xx Amber 590 HLMP-AL11-KN0xx Luminous Intensity, Iv (mcd) at 20 mA Max. Leads with Stand-offs Leadframe Orientation Package Drawing No Parallel A Yes Parallel B No Parallel A 1150 No Parallel A 680 1900 No Parallel A Amber 590 310 880 Yes Parallel B HLMP-AL11-NR0xx Amber 590 680 1900 Yes Parallel B HLMP-BG01-LM0xx Red 626 400 520 No Perpendicular C HLMP-BG01-MN0xx Red 626 520 880 No Perpendicular C HLMP-BG11-KN0xx Red 626 310 880 Yes Perpendicular D HLMP-BL01-NR0xx Amber 590 680 1900 No Perpendicular C HLMP-BL11-KN0xx Amber 590 310 880 Yes Perpendicular D HLMP-BL11-NR0xx Amber 590 680 1900 Yes Perpendicular D 880 Table 3. Device Selection Guide for InGaN Part Number Color and Dominant Luminous Intensity, Wavelength d (nm) Typ. Iv (mcd) at 20 mA Min. Leads with Stand-offs Leadframe Orientation Package Drawing HLMP-AB01-J00xx Blue 472 240 No Parallel A HLMP-BB11-J00xx Blue 472 240 Yes Perpendicular D HLMP-BB11-K00xx Blue 472 310 Yes Perpendicular D HLMP-BM11-L00xx Green 526 400 Yes Perpendicular D HLMP-BM11-Q00xx Green 526 1150 Yes Perpendicular D HLMP-AB11-J00xx Blue 472 240 Yes Parallel B HLMP-AM01-Q00xx Green 526 1150 No Parallel A HLMP-BB01-J0Bxx Blue 472 240 No Perpendicular C HLMP-BB11-KN0xx HLMP-BM01-L00xx Blue 472 Green 526 310 400 Yes No Perpendicular Perpendicular D C Tolerance for intensity range limit is 15%. 3 Part Numbering System HLMP-X X X X - X X X XX Mechanical Options 00: Bulk Packaging DD: Ammo Pack YY: Flexi-Bin; Bulk Packaging ZZ: Flexi-Bin; Ammo Pack Color Bin 0: No Color Bin Limitation R: Color Bins 1, 2, 4, and 6 with VF max of 2.6 V T: Red Color with VF max of 2.6 V B: Color bin 2 and 3 only K: Color bins 2 and 4 only S: Color bins 2 and 4 with VF max of 2.6 V Maximum Intensity Bin 0: No Iv Bin Limitation Minimum Intensity Bin Tint Option 1 or 6: Matching Color Tints Standoff Option 0: Without 1: With Color B: 472 nm Blue D: 630 nm Red G: 626 nm Red L: 590 or 592 nm Amber M: 526 nm Green Package A: 5 mm 35 x 70 Oval, Parallel B: 5 mm 35 x 70 Oval, Perpendicular 4 Package Dimensions 8.71 0.20 (0.343 0.008) 0.50 0.10 SQ. TYP. (0.020 0.004) 5.00 0.20 (0.197 0.008) 0.70 (0.028) MAX. 2.54 0.38 (0.100 0.015) A CATHODE LEAD 1.00 MIN. (0.039) 31.60 MIN. (1.244) 1.50 0.15 (0.059 0.006) 8.71 0.20 (0.343 0.008) 5.00 0.20 (0.197 0.008) 0.50 0.10 SQ. TYP. (0.020 0.004) 0.70 (0.028) MAX. 2.54 0.38 (0.100 0.015) B ( + 0.13 11.70 - 0.08 + 0.005 0.461 - 0.003 ) CATHODE LEAD 1.00 MIN. (0.039) 31.60 MIN. (1.244) 8.71 0.20 (0.343 0.008) 5.00 0.20 (0.197 0.008) 0.50 0.10 SQ. TYP. (0.020 0.004) 0.70 (0.028) MAX. 2.54 0.38 (0.100 0.015) C CATHODE LEAD 1.00 MIN. (0.039) 31.60 MIN. (1.244) 8.71 0.20 (0.343 0.008) 5.00 0.20 (0.197 0.008) 1.50 0.15 (0.059 0.006) 0.50 0.10 SQ. TYP. (0.020 0.004) 0.70 (0.028) MAX. D CATHODE LEAD 31.60 MIN. (1.244) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE AN EPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 IN.) DOWN THE LEADS. 4. RECOMMENDED PC BOARD HOLE DIAMETERS: - LAMP PACKAGES A AND C WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OF LAMP PACKAGE = 1.143/1.067 mm (0.044/0.042 IN.). - LAMP PACKAGES B AND D WITH STAND-OFFS: MOUNTING AT LEAD STAND-OFFS. 5 1.00 MIN. (0.039) 2.54 0.38 (0.100 0.015) Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current[1] Peak Pulsed Forward Current[2] Average Forward Current Reverse Voltage (IR = 100 A) Reverse Voltage (IR = 10 A) Power Dissipation LED Junction Temperature Operating Temperature Range Storage Temperature Range Wave Soldering Temperature[3] Notes: 1. Derate linearly from Figure 7. 2. Duty Factor 30% KHz. 3. 1.59 mm (0.060 in.) below body. 6 Blue and Green 30 mA 100 mA 30 mA 5V 120 mW 130C -40C to +80C -40C to +100C 250C for 3 seconds Red and Amber 50 mA 100 mA 30 mA 5V 120 mW 130C -40C to +100C -40C to +120C 250C for 3 seconds Electrical/Optical Characteristics at TA = 25C Parameter Symbol Typical Viewing Angle Major Minor 21/2 Forward Voltage Red (d = 626 nm) Red (d = 630 nm) Option xx0xx Option xxTxx Amber (d = 590 nm) Amber (d = 592 nm) Option xx0xx Option xxRxx, xxSxx Blue (d = 472 nm) Green (d = 526 nm) Reverse Voltage Amber, Red Blue, Green Peak Wavelength Amber (d = 592 nm) Red (d = 630 nm) Blue (d = 472 nm) Green (d = 526 nm) Spectral Halfwidth Amber (d = 592 nm) Red (d = 630 nm) Blue (d = 472 nm) Green (d = 526 nm) Capacitance Amber, Red Blue, Green Luminous Efficacy Amber (d = 592 nm) Red (d = 630 nm) Blue (d = 472 nm) Green (d = 526 nm) Thermal Resistance Min. Typ. Max. 70 35 Units Test Conditions deg VF V IF = 20 mA 20 - V IR = 100 A IR = 10 A peak 594 639 470 524 nm 1/2 17 17 35 47 nm C 40 43 pF v 500 155 75 520 lm/W RJ-PIN 240 C/W VR 5 5 2.0 2.4 2.2 2.3 2.0 2.4 2.6 2.4 2.2 2.3 3.5 3.5 2.4 2.6 4.0 4.0 Peak of Wavelength of Spectral Distribution at IF = 20 mA Wavelength Width at Spectral Distribution 1/2 Power Point at IF = 20 mA VF = 0, F = 1 MHz Emitted Luminous Power/Emitted Radiant Power at IF = 20 mA LED Junction-toCathode Lead Notes: 1. 21/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity. 2. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie = Iv/v where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 3. The luminous intensity is measured on the mechanical axis of the lamp package. 4. The optical axis is closely aligned with the package mechanical axis. 5. The dominant wavelength, d, is derived from theCIE Chromaticity Diagram and represents the color of the lamp. 6. For Options -xxRxx, -xxSxx and -xxTxx, max. forward voltage (Vf) is 2.6 V. Refer to Vf bin table. 7 1.0 BLUE GREEN AMBER 30 RED IF - FORWARD CURRENT - mA 0.9 RELATIVE INTENSITY 0.8 0.7 0.6 0.5 0.4 0.3 0.2 25 20 15 10 5 0.1 0 400 450 550 500 650 600 0 2.4 700 2.6 WAVELENGTH - nm Figure 1. Relative intensity vs. wavelength. CURRENT - mA 40 AMBER 30 20 10 INTENSITY NORMALIZED AT 20 mA DC FORWARD CURRENT - mA RED 50 40 30 20 AMBER 10 RED 1.5 2.0 2.5 0 3.0 0 0.5 VF - FORWARD VOLTAGE - V 1.0 1.5 2.0 2.5 0 3.0 0 5 10 15 20 25 30 Figure 4. Blue, green relative luminous intensity vs. forward current. 40 50 2.0 RED 1.5 AMBER 1.0 0.5 0 10 20 30 40 FORWARD CURRENT - mA Figure 5. Amber, red relative luminous intensity vs. forward current. 50 IF - FORWARD CURRENT - mA IF - FORWARD CURRENT - mA 35 RELATIVE INTENSITY (NORMALIZED AT 20 mA) 0.5 IF - FORWARD CURRENT - mA Figure 3b. Forward current vs. forward voltage for option -xxTxx red, and option -xxRxx and -xxSxx amber. 2.5 8 1.0 FORWARD VOLTAGE - V Figure 3a. Amber, red forward current vs. forward voltage. 0 3.6 1.5 50 0 1.0 3.4 3.2 Figure 2. Blue, green forward current vs. forward voltage. 70 60 3.0 2.8 VF - FORWARD VOLTAGE - V 30 25 20 15 10 5 0 40 RqJA = 585 C/W 30 RqJA = 780 C/W 20 10 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - C Figure 6. Blue, green maximum forward current vs. ambient temperature. 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - C Figure 7. Amber, red maximum forward current vs. ambient temperature. 100 RELATIVE INTENSITY - % 90 80 70 60 50 40 30 20 10 0 50 40 30 20 10 0 -10 -20 -30 -40 -50 -30 -40 -50 VERTICAL ANGULAR DISPLACEMENT - DEGREES 100 RELATIVE INTENSITY - % 90 80 70 60 50 40 30 20 10 0 50 40 30 20 10 0 -10 -20 HORIZONTAL ANGULAR DISPLACEMENT - DEGREES Figure 8. Spatial radiation pattern - 35 x 70 degree lamps. Intensity Bin Limits (mcd at 20 mA) Bin Name G H J K L M N P Q R S T U Min. 140 180 240 310 400 520 680 880 1150 1500 1900 2500 1900 Amber Color Bin Limits (nm at 20 mA) Max. 180 240 310 400 520 680 880 1150 1500 1900 2500 3200 2500 Tolerance for each bin limit is 15%. Bin Name 1 2 4 6 Min. 584.5 587.0 589.5 592.0 Max. 587.0 589.5 592.0 594.5 Tolerance for each bin limit is 0.5 nm. Max. 524.0 528.0 532.0 536.0 540.0 Tolerance for each bin limit is 0.5 nm. Blue Color Bin Limits (nm at 20 mA) Bin Name 1 2 3 Min. 460.0 464.0 468.0 Max. 464.0 468.0 472.0 4 5 472.0 476.0 476.0 480.0 Tolerance for each bin limit is 0.5 nm. 9 Green Color Bin Limits (nm at 20 mA) Bin Name Min. 1 520.0 2 524.0 3 528.0 4 532.0 5 536.0 Vf Bin Table[2] Bin Id VA VB VC Min. 2.0 2.2 2.4 Max. 2.2 2.4 2.6 Notes: 1. All bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for further information. 2. Vf bin table only available for those numbers with options -xxRxx, -xxSxx, -xxTxx. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004 Agilent Technologies, Inc. August 27, 2004 5988-9224EN