RS N1 M RSA0K1 V Motor-driven Master TypeMotor N Fader, Motor K Fader, Motor V Fader RSA0V11M Provides a superior operational feel with high-speed tracking in motor drive mode Typical Specifications Specifications Motor N fader Motor K fader Motor V fader Items Total resistance tolerance 20% 10V DC, 200V ACTravel60mm 10V DC, 500V ACTravel100mm Maximum operating voltage Operating life 0.80.5N 0.40.25N 30,000 cycles 300,000 cycles 100,000 cycles Maximum current of motor 10V DC 8V DC 800mA or less at 10V DC 625mA or less at 5V DC Operating temperature range -10 to 60 Number of Travel resistor elements mm Lever type Type Length of Total resistance Resistance Touch sense Minimum order unitpcs. Terminal style levermm k taper track Japan Export Drawing No. 120 RS60N11M9A0E 1 240 RS60N11M9A0F 2 80 RSA0N11M9A0K 3 160 RSA0N11M9A0J 4 42 84 RSA0K11V901S 5 80 80 RSA0V11M9001 6 Lead 60 For PC board for auto dipping Motor N Fadar 9-T T-bar Single-unit 100 120 Lead 8.2 10 1B Motor K Fadar CP type With 80 For PC board for auto dipping Connector Motor V Fadar 10.95 Without Mixer Products No. General-use Product Line Slide Potentiometers Rated voltage of motor Rotary Potentiometers Operating force Note Other varieties are also available. Refer to "Other Specifications" (P.414). Packing Specifications Bulk/Tray Product No. RS60N RSA0N RSA0K RSA0V Terminal style Packing specifications Lead For PC board Lead 120 Tray 80 For PC board Connector Number of packagespcs. 1 case /Japan 1 case /export packing Export package measurements mm 120 366x280x154 240 375x285x393 80 366x280x154 160 375x285x393 Bulk 42 84 524x374x201 Tray 80 80 540x360x205 Refer to P.414 for other specifications. Refer to P.414 for details of lever types. Refer to P.415, 416 for ordering products not listed. Refer to P.417 for soldering conditions. 411 RS N1 M RSA0K1 V Motor-driven Master TypeMotor N Fader, Motor K Fader, Motor V Fader RSA0V11M Dimensions Unit:mm No. Style 52.5 54 2-M3 17 Rotary Potentiometers 80 18.5 (14.5) 8.2 1.5 (8) (43.6) 23T (41) A B (2) 1.5 1.2 2-(o2) (7.35) 0.4 4 8.2 21 max. 1 (10) (13.8) Terminal No. 1 General-use PC board mounting hole dimensions Viewed from mounting side (8) 3T SIDE 1T SIDE Mounting surface 1.5 8.2 60(Travel) 18.5 2-o2 hole 1 L T 3 L 2 36.65 43.65 6-o1.5 hole A B 9.55 26 2 1.5 1.2 2-(o2) 18 max. 80 18.5 (14.5) 4 8.2 2-M3 8 52.5 (2) Mixer 54 11.25 3.75 Slide Potentiometers 60(Travel) 18.5 Mounting surface 0.4 0.5 L:Lug terminal 72.5 74 2-M3 23T 412 21 max. (10) (13.8) 27.35 (63.6) (61) A B 18.5 (14.5) (8) 3 0.4 1.5 1 Terminal No. 1.5 1.2 2-(o2) 18.5 4 8.2 100(Travel) (2) Mounting surface 8.2 17 120 RSN1M/RSA0K1V/RSA0V11MMotor-driven Master Type Dimensions Unit:mm Style 18.5 (14.5) 4 8.2 (2) 72.5 2-(o2) 74 2-M3 3T SIDE 100(Travel) 18.5 1.5 1 L T 3 L 2 2-o2 hole 56.65 63.65 6-o1.5 hole A B 29.55 26 Mounting surface 11.25 3.75 1T SIDE 8.2 4 Slide Potentiometers 18 max. 120 Rotary Potentiometers 1.5 1.2 (8) 8 No. PC board mounting hole dimensions Viewed from mounting side 0.5 0.4 159 83 120 14.5 max. Mixer 3T SIDE 1T SIDE 100 Mounting surface 18.5 18.5 (14.5) 1.5 8.2 3 M 2- 1.5 1.2 (8) 124.15 A SIDE 8 B 100(Travel) Mounting surface 133.37 136.37 138.35 143.77 Connector: PHR-3(JST) B SIDE 3.25 0. 2 4- R BLACK RED WHITE 1 1.8 4.87 25.05 1.6 R1 .55 3.5 *108.6 147.8 155.9 162.75 A Connector: PHR-2(JST) .1 3 20.8 3 10.95 3.25 74.15 (*Dimension width center) 3.1 7.7 13.35 24.4 8 .5 2-(o2) Connector (JST S4B-EH) 8.8 DETAIL A A RED B BLACK 6 .3 R0 2- 4 Terminal No. 3 1 2 T B 2.2 A 20.3 23.4 43.4 (37) (39) 12.5 4.59 8.4 0.3 0.3 (12.4) 2.5X3=7.5 (75) (9.6) (13.7) (3.5) 39 7 33.5 (2) 4 8.2 5 6 General-use L:Lug terminal DETAIL B 413 Motor-driven Master Type / Other Specifications In addition to the products listed, we can accommodate the follow specifications. Products Specifications Type Travel mm Model 60 RS60N11M Operating force Motor N fader Single-unit Touch sense track 0.80.5N For PC board for auto dipping Lead 0.40.25N Fader terminalConnector Motor terminalLead RSA0N11M Rotary Potentiometers 100 Motor K fader CP type RSA0K11V Available 60 RS60N12M Slide Potentiometers Motor N fader Dual-unit Servo Audio track Terminal Lead 0.80.5N RSA0N12M 100 Motor K fader CP type RSA0K12V Lever Types 0.5 +0.4 -0.25 Fader terminalConnector Motor terminalLead N Unit:mm 9-T T-Bar Configuration code General-use Wiper 2 t=1.2 18.5 100% 3 1 0% 14.5 1.5 8 1.2 (2) 4 8.2 Dimensions 2-(o2) Mixer Total Resistance Variety Total resistancek Lever 10 50 100 250 Motor K fader, Motor V fader:Only 10k T Resistance Taper Servo 1B Resistance taper Audio 15A 1B 10A Circuit Diagram Motor Servo track M A B - or - Moving direction of lever and contacts 100% 3 100% 3 A= B= Touch sense track 1 0% 1 0% Note Marked are specifications recommended by Alps Alpine. - - Refer to P.415, 416 for ordering products not listed. 414 Motor-driven Master Type (Motor N Fader) / Ordering Products Not Listed When ordering product varieties that are not listed, specify referring to the examples below. Sample Part Number R S 6 0 N 1 1 M T 0 B 1 0 3 60 60 A0 100 Rotary Potentiometers Travel (mm) Slide Potentiometers Number of resistor elements Single-unit 1 Dual-unit 2 General-use Touch sense track Touch sense track T0 Without T1 With Mixer Code P Resistance taper 1B A 15A D 10A For dual-units specify the taper of the audio track. Servo track will always be 1B taper. 90 80 70 60 50 40 30 ) B 100 B( 1B Resistance taper Output volt.across term.1-2 100 (%) J Input volt. across term. 1-3 G Code 20 0A) 10 0 A) 15 A( D(1 10 Term."1" 20 30 40 50 60 70 Rotation travel (%) 80 90 100 J Term."3" Total resistance Code Total resistancek 103 10 503 50 104 100 254 250 Terminal configuration Code Terminal configuration P For PC board L Lead Note Marked are specifications recommended by Alps Alpine. 415 Motor-driven Master Type (Motor K Fader) / Ordering Products Not Listed When ordering product varieties that are not listed, specify referring to the examples below. Sample Part Number R S A 0 K 1 1 V T 0 1 Dual-unit 2 CP type V Type Touch sense track T0 Without T1 With Code Resistance taper B 1B A 15A D 10A Appoint the taper of audio track in the case of dual-unit. Servo track is surely 1B taper. 100 90 80 70 60 50 40 30 ) Mixer Code 1B General-use Touch sense track B( Slide Potentiometers Single-unit Output volt.across term.1-2 100 (%) J Input volt. across term. 1-3 G Rotary Potentiometers Number of resistor elements Resistance taper 20 D(1 10 Term."1" Total resistance Code Total resistancek 103 10 A) 15 A( 0A) 10 0 20 30 40 50 60 70 Rotation travel (%) Note Marked are specifications recommended by Alps Alpine. 416 B 1 0 3 80 90 100 J Term."3" Type Low-profile Master Type Slim Type Series Motor-driven Master Type Super P Fader Motor N Fader Motor K Fader Motor V Fader RS N11S RS6011 P RS N1 M RSA0K1 V RSA0V11M Single-unit Single-unit/Dual-unit Single-unit/Dual-unit Single-unit/Dual-unit Single-unit 60, 100 60 60, 100 Photo Direction of lever 100 Vertical Metal Operating temperature range Resin -10 to +60 Operating life 30,000 cycles 10, 50, 100, 250 10, 20, 50 10, 50, 100, 250 300,000 cycles 100,000 cycles Total resistance k Resistance taper Rated Power 0.2W (RS60N11S) 0.5W (RSA0N11S) 0.2W (Single-unit) 0.1W (Dual-unit) 0.2W (RS60N1M) 0.5W (RSA0N1M) 100M min. 250V DC Voltage proof 250V AC for 1 minute Center-taps Without 0.3 +0.5 N -0.25 0.5 +1.0 N -0.4 0.80.5N Center detent Mechanical performance 0.5W Insulation resistance Operating force 1B Mixer Electrical performance 10 Single-unit1B Dual-unitServo 1B Audio 15A, 1B, 10A 15A, 1B, 10A General-use Life cycle Single-unit0.40.25N Dual-unit0.25 to 0.9N Without Stopper strength 100N 10N Lever push-pull strength 50N 20N Lever wobblemm Both sides 22xL 25 Lever deviationmm 0.5 max.One side Terminal style Page Slide Potentiometers Lever material Available for automotive use Rotary Potentiometers Travelmm Lead, Insertion Insertion 405 408 ConnectorFader LeadMotor Connector 411 Slide Potentiometers Soldering Conditions 417 Potentiometer Cautions 418 Potentiometers Measurement and Test Methods 420 Potentiometers Resistance Taper 422 Notes 1. Attenuation is specified for residual resistance. 2."L"in the"Lever Wobble"column of the above table indicates the length of lever. 385 Slide Potentiometers / Soldering Conditions Reference for Manual Soldering Series Tip temperature Duration of Soldering time No. of solders 350 max. 3s max. 1 time RS1, RS08U, RSKStandard, RSN, RSN11S, RS6011P, RSN1M, RSA0K1VMotor terminal Preheating Soldering surface Heating time temperature Series 100 max. 1 min. max. 260 5s max. Number of soldering 1 time Slide Potentiometers RS1, RSN, RSN11S, RS6011P, RSN1M Dip soldering Soldering Soldering time temperature Rotary Potentiometers Reference for Dip Soldering Example of Reflow Soldering Condition Temperature profile A B 200 C D Mixer Temperature (C ) General-use 300 100 Room temperature Time (s) Pre-heating E max. F max. G max. H max. Series RS08U A B C D E F G H No. of reflows 250 200 150 150 2 min. 3s 40s 4 min. 1 time Notes 1. When using an infrared reflow oven, solder may sometimes not be applied. Be sure to use a hot air reflow oven or a type that uses infrared rays in combination with hot air. 2. The temperatures given above are the maximum temperatures at the terminals of the products when employing a hot air reflow method. The temperature of the PC board and the surface temperature of the products may vary greatly depending on the PC board material, its size and thickness. Ensure that the surface temperature of the products does not rise to 250 C or greater. 3. Conditions vary to some extent depending on the type of reflow bath used. Be sure to give due consideration to this prior to use. 417