Adapter Products
Code 40 MIL-C-38999 Series III and IV
6-50 Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
208M7XX-XXXXX
208M8XX-XXXXX
208M9XX-XXXXX
Z Dia.
YDia.
C
D
Y Dia.
Z Dia.
W
Z Dia.
152.4
[6.00] Min.
E
Y Dia.
Table of Dimensions
Braided Adapters
Order Shell Size Max. Entry* Dimensions
No. Commercial Military Size Type 1 Thread CMax. D Max. E Max.
08 9 A 04 M12 x 1.0 20.8 [0.82] 22.6 [0.89] 29.2 [1.15]
10 11 B 07 M15 x 1.0 21.3 [0.84] 23.4 [0.92] 30.7 [1.21]
12 13 C 09 M18 x 1.0 22.1 [0.87] 24.1 [0.95] 32.5 [1.28]
14 15 D 10 M2 x 1.0 22.6 [0.89] 24.1 [0.95] 34.0 [1.34]
16 17 E 12 M25 x 1.0 23.4 [0.92] 24.9 [0.98] 35.6 [1.40]
18 19F14 M28 x 1.0 24.1 [0.95] 25.7 [1.01] 37.1 [1.46]
20 21 G 16 M31 x 1.0 24.6 [0.97] 26.4 [1.04] 38.9 [1.53]
22 23 H 18 M34 x 1.0 25.4 [1.00] 27.2 [1.07] 40.4 [1.59]
24 25 J 20 M37 x 1.0 25.9 [1.02] 27.2 [1.07] 42.4 [1.67]
*For larger than maximum type 1 entry sizes, a two-piece adapter will be supplied. Contact Tyco Electronics for
information.
Available in: Americas Europe Asia Pacific
nnn
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-51
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
6
Adapters
Entry Dimensions
Size Z +0.25–0.5 Y Dia. W Max.
04 6.35 [0.25] 13.97 [0.55] 31.2 [1.23]
05 7.92 [0.31] 15.54 [0.61] 32.8 [1.29]
06 9.52 [0.37] 17.14 [0.67] 34.3 [1.35]
07 11.09 [0.44] 18.71 [0.74] 36.1 [1.42]
08 12.7 [0.50] 20.32 [0.80] 37.6 [1.48]
10 15.87 [0.62] 23.49 [0.92] 40.6 [1.60]
12 19.05 [0.75] 26.67 [1.05] 43.9 [1.73]
14 22.23 [0.88] 29.84 [1.17] 47.0 [1.85]
16 25.4 [1.00] 33.02 [1.30] 50.8 [2.00]
18 28.57 [1.12] 36.19 [1.42] 54.1 [2.13]
20 31.75 [1.25] 39.37 [1.55] 57.21 [2.25]
Standard K Parts Low-Profile D Parts
Tinel-Lock Straight 90° Cable OD Straight 90° Cable OD
Entry Size Part No. Part No. (Min.) Part No. Part No. (Min.)
04 202K232 — 3.3 [0.1] — — —
04 202W232 — 4.3 [0.2] — — —
04 202K121 222K121 5.6 [0.2] 202D211 222D211 6.4 [0.3]
05, 06 202K132 222K132 5.9 [0.2] 202D221 222D221 7.4 [0.3]
07, 08 202K142 222K142 7.1 [0.3] 202D232 222D232 8.4 [0.3]
10, 12 202K153 222K152 8.4 [0.3] 202D242 222D242 9.7 [0.4]
14, 16 202K163 222K163 9.9 [0.4] 202D253 222D253 10.5 [0.4]
18, 20, 22 202K174 222K174 15.7 [0.6] 202D263 222D263 12.2 [0.5]
24 202K185 222K185 16.8 [0.7] — — —
Entry Size Dimensions
Molded Part Selection Guide
(Braided)
Uniboot Parts Tinel- Lock Part Cable OD
Entry Size No. (Min.)
04 202C611 4.8 [0.19]
05, 06, 07 202C621 8.1 [0.32]
08, 10, 12 202C632 12.7 [0.50]
12, 14, 16 202C642 17.5 [0.69]
16, 18, 20, 22 202C653 22.4 [0.88]
24 202C663 22.9 [0.90]
Braided Adapters
(continued)
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-52 Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
Solid Adapters
Z Dia. Y Dia.
A
Thread
209M3XX-XXX
Table of Dimensions
Molded Part Selection Guide
(Solid)
Dimensions
Order Shell Size Military AY+.000- .030 Z Dia.
No. Commercial Thread (+0.00) (–0.76) Min.
08 9 A M12 x 1.0 18.26 [.719] 6.35 [.250]
10 11 B M15 x 1.0 21.44 [.844] 9.52 [.375]
12 13 C M18 x 1.0 24.61 [.969] 12.70 [.500]
14 15 D M22 x 1.0 30.91 [1.217] 15.88 [.625]
16 17 E M25 x 1.0 34.40 [1.354] 19.05 [.750]
18 19 F M28 x 1.0 37.50 [1.476] 20.62 [.812]
20 21 G M31 x 1.0 38.89 [1.531] 23.80 [.937]
22 23 H M34 x 1.0 42.06 [1.656] 26.97 [1.062]
24 25 J M37 x 1.0 45.24 [1.781] 30.18 [1.188]
Standard K Parts Low-Profile D Parts
Order Straight 90° Cable OD Straight 90° Cable OD
No. Part No. Part No. (Min.) Part No. Part No. (Min.)
08 202K132 222K132 5.9 [0.23] 202D221 222D221 7.4 [0.29]
10 202K142 222K142 7.1 [0.28] 202D232 222D232 8.4 [0.33]
12, 14 202K153 222K152 8.4 [0.33] 202D242 222D242 9.7 [0.38]
16, 18 202K163 222K163 9.9 [0.39] 202D253 222D253 10.5 [0.41]
20, 22, 24 202K174 222K174 15.7 [0.62] 202D263 222D263 12.2 [0.48]
Uniboot Parts Order Part Cable OD
No. No. (Min.)
08 202C621 8.1 [0.32]
10 202C632 12.7 [0.50]
12, 14 202C642 17.5 [0.69]
16, 18, 20, 22 202C653 22.4 [0.88]
Available in: Americas Europe Asia Pacific
nnn
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-53
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
6
Adapters
Spin-Coupling Adapters
209M4XX-XXX
Z
10.4
[0.40]
Max.
Y
Thread [.710]
18.03
Min.
Table of Dimensions
Molded Part Selection Guide
(Spin-Coupling)
Order Shell Size Dimensions
No. Commercial Military Thread YDia. Max. Z Dia. Max.
08 9 A M12 x 1.0 13.54 [0.53] 6.35 [0.25]
10 11 B M15 x 1.0 15.37 [0.61] 9.52 [0.37]
1213 C M18 x 1.0 19.66 [0.77] 12.7 [0.50]
14 15 D M22 x 1.0 21.29 [0.84] 15.75 [0.62]
16 17 E M25 x 1.0 24.46 [0.96] 18.92 [0.74]
18 19 F M28 x 1.0 26.47 [1.04] 20.62 [0.81]
20 21 G M31 x 1.0 30.91 [1.22] 23.8 [0.94]
22 23 H M34 x 1.0 34.42 [1.36] 26.97 [1.06]
24 25 J M37 x 1.0 36.65 [1.44] 29.85 [1.18]
Standard K Parts Low-Profile D Parts
Order Straight 90° Cable OD Straight 90° Cable OD
No. Part No. Part No. (Min.) Part No. Part No. (Min.)
03, 08 202W232 — 4.3 [0.19] — — —
03, 08 202K121 222K121 5.6 [0.22] 202D211 222D211 6.4 [0.25]
10, 11 202K132 222K132 5.9 [0.23] 202D221 222D221 7.4 [0.29]
12, 14 202K142 222K142 7.1 [0.28] 202D232 222D232 8.4 [0.33]
16, 18 202K153 222K152 8.4 [0.33] 202D242 222D242 9.7 [0.38]
20, 22 202K163 222K163 9.9 [0.39] 202D253 222D253 10.5 [0.41]
24, 28 202K174 222K174 15.7 [0.62] 202D263 222D263 12.2 [0.48]
32, 36 202K185 222K185 16.8 [0.66] — — —
Uniboot Parts Order Part Cable OD
No. No. (Min.)
03, 08 202C611 4.8 [0.19]
10, 11, 12 202C621 8.1 [0.32]
14, 16 202C632 12.7 [0.50]
18, 20 202C642 17.5 [0.69]
22, 24 202C653 22.4 [0.88]
Available in: Americas Europe Asia Pacific
nnn
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-54 Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
Tinel-Lock Adapters
Max.
Thread
Z
Min.
SY
[1.059]
26.9
13.0
[.512]
Thread C Max.
D Max.
Min.
ZSY
13.0
[.512]
W Max.
E Max.
Thread
Min.
Z
S
Y
[.512]
13.0
TXR40XX00-XXXXXX
TXR40XX45-XXXXXX
TXR40XX90-XXXXXX
Order Shell Size Max. Entry* Dimensions
No. Commercial Military Size Type 1 Thread CMax. D Max. E Max.
08 9A04 M12 x 1.0 20.8 [0.82] 22.6 [0.89] 27.9 [1.10]
10 11 B 07 M15 x 1.0 21.3 [0.84] 23.4 [0.92] 30.5 [1.20]
12 13 C 08 M18 x 1.0 22.1 [0.87] 24.1 [0.95] 32.0 [1.26]
14 15 D 10 M2 x 1.0 22.6 [0.89] 24.1 [0.95] 34.0 [1.34]
16 17 E 12 M25 x 1.0 23.4 [0.92] 24.9 [0.98] 35.6 [1.40]
18 19 F 14 M28 x 1.0 24.1 [0.95] 25.7 [1.01] 36.8 [1.45]
20 21 G 16 M31 x 1.0 24.6 [0.97] 26.4 [1.04] 38.4 [1.51]
22 23 H 18 M34 x 1.0 25.4 [1.00] 27.2 [1.07] 39.9 [1.57]
24 25 J 20 M37 x 1.0 25.9 [1.02] 27.2 [1.07] 42.4 [1.67]
*For larger than maximum type 1 entry sizes, a two-piece adapter will be supplied. Contact Tyco Electronics for
information.
Table of Dimensions
Available in: Americas Europe Asia Pacific
nnn
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-55
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
6
Adapters
Entry Size Dimensions
Molded Part Selection Guide
(Tinel)
Uniboot Parts Tinel-Lock Part Cable OD
Entry Size No. (Min.)
04 202C611 4.8 [0.19]
05, 06, 07 202C621 8.1 [0.32]
08, 10, 12 202C632 12.7 [0.50]
12, 14, 16 202C642 17.5 [0.69]
16, 18, 20, 22 202C653 22.4 [0.88]
24 202C663 22.9 [0.90]
Entry Dimensions
Size Z +0.25–0.5 S Diameter (Min.–Max.) Y Dia. W Max.
04 6.35 [0.25] 9.39–9.56 [0.37–0.38] 13.97 [0.55] 31.2 [1.23]
05 7.92 [0.31] 10.97–11.13 [0.43–0.44] 15.54 [0.61] 32.8 [1.29]
06 9.52 [0.37] 12.57–12.73 [0.49–0.50] 17.14 [0.67] 34.3 [1.35]
07 11.09 [0.44] 14.12–14.31 [0.55–0.56] 18.71 [0.74] 36.1 [1.42]
08 12.7 [0.50] 15.72–15.91 [0.62–0.63] 20.32 [0.80] 37.6 [1.48]
10 15.87 [0.62] 18.84–19.11 [0.74–0.75] 23.49 [0.92] 40.6 [1.60]
12 19.05 [0.75] 22.02–22.28 [0.87–0.88] 26.67 [1.05] 43.9 [1.73]
14 22.23 [0.88] 25.17–25.46 [0.99–1.00] 29.84 [1.17] 47.0 [1.85]
1625.4 [1.00] 28.34–28.63 [1.12–1.13] 33.02 [1.30] 50.8 [2.00]
18 28.57 [1.12] 31.52–31.81 [1.24–1.25] 36.19 [1.42] 54.1 [2.13]
20 31.75 [1.25] 34.69–34.98 [1.37–1.38] 39.37 [1.55] 57.21 [2.25]
Standard K Parts Low-Profile D Parts
Tinel-Lock Straight 90° Cable OD Straight 90° Cable OD
EntrySize Part No. Part No. (Min.) Part No. Part No. (Min.)
04 202K232 — 3.3 [0.1] — — —
04 202W232 — 4.3 [0.2] — — —
04 202K121 222K121 5.6 [0.2] 202D211 222D211 6.4 [0.3]
05, 06 202K132 222K132 5.9 [0.2] 202D221 222D221 7.4 [0.3]
07, 08 202K142 222K142 7.1 [0.3] 202D232 222D232 8.4 [0.3]
10, 12 202K153 222K152 8.4 [0.3] 202D242 222D242 9.7 [0.4]
14, 16 202K163 222K163 9.9 [0.4] 202D253 222D253 10.5 [0.4]
18, 20, 22 202K174 222K174 15.7 [0.6] 202D263 222D263 12.2 [0.5]
24 202K185 222K185 16.8 [0.7] — — —
Tinel-Lock Adapters
(continued)
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-56 Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
CRES-Lock Adapters (USA)
BND Adapters (Europe)
Code 40 Band Strap
Adapter
Notes:
1. This product is designed to
terminate a braided cable shield
bymeans of a band strap and a
heat shrinkable lipped boot to
aconnector.
2. See CH00-0250-016 for ordering
information, modifications and
additional dimensions.
3. See drawing BND-XX25S for band
strap dimensions and information.
4.Adapter to be permanently
marked with code identification
number and full part number (e.g.
06090-BND40AB00-1814). Band
strap shall bear no part marking.
5.All entry sizes are shown in Table
II. Maximum entry sizes are as
shown in Table I. For larger entry
sizes than the maximum, a Type II
adapter may be supplied. See
CH00-0250-016 for further details.
6. Adapter mates to: MIL-C-38999
Series III and IV,Class C, F, K
and W,D38999/20, /24, /26, /40,
/46 and /47 Connectors. When so
mated it shall provide a water-
tight seal meeting the require-
ments of MIL-C-85049, paragraph
3.5.7.
7. Coupling nut shall have 3 lock
wire holes 120° apart.
For additional codes available, contact
Tyco Electronics.
C
Max.
D
Max.
Straight Adapter
Code 00
45° Adapter
Code 45
16.5
[0.65]
Ø A Thd.
Typ.
ØBMax.
Typ.
Max.
Type II Modification
(See Note 5)
E
Max.
F
Max.
90° Adapter
Code 90
Available in: Americas Europe Asia Pacific
nnn
Adapter Products
Code 40 MIL-C-38999 Series III and IV (Continued)
6-57
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
6
Adapters
CRES-Lock Adapters (USA)
BND Adapters (Europe)
(continued)
Code 40 Band Strap
Adapter (Continued)
Table I
Order Shell Entry Size Ø A ØBØ B C D F
Number Size2Max. Metric Thread Max. Max.3Max. Max. Max.
Com. MIL Type I1Class 2B
89 A 04 M12 x 1.0 19.1 24.6 20.8 26.7 32.0
0.75 0.97 0.82 1.05 1.26
10 11 B 07 M15 x 1.0 21.6 27.0 21.3 27.4 34.5
0.85 1.06 0.84 1.08 1.36
12 13 C 09 M18 x 1.0 25.4 31.0 22.1 28.2 36.1
1.00 1.22 0.87 1.11 1.42
14 15 D 10 M22 x 1.0 29.2 35.8 22.6 28.2 38.1
1.15 1.41 0.89 1.11 1.50
16 17 E 12 M25 x 1.0 31.8 37.3 23.4 29.0 39.6
1.25 1.47 0.92 1.14 1.56
18 19 F 14 M28 x 1.0 35.6 40.6 24.1 29.7 40.9
1.40 1.60 0.95 1.17 1.61
20 21 G 16 M31 x 1.0 38.1 44.5 24.6 30.5 42.4
1.50 1.75 0.97 1.20 1.67
22 23 H 18 M34 x 1.0 41.9 47.0 25.4 31.3 43.9
1.65 1.85 1.00 1.23 1.73
24 25 J 20 M37 x 1.0 44.5 51.6 25.9 31.3 46.5
1.75 2.03 1.02 1.23 1.83
1. All entry sizes are shown in Table II. Maximum entry sizes are as shown in Table I. For larger entry sizes than the
maximum, a Type II adapter may be supplied. See CH00-0250-016 for further details.
2.Adapter mates to: MIL-C-38999 Series III and IV, Class C, F, K and W, D38999/20, /24, /26, /40, /46 and /47
Connectors. When so mated it shall provide a water-tight seal meeting the requirements of MIL-C-85049, paragraph
3.5.7.
3. These dimensions apply if a self-locking coupling nut is used, modification code “S”.
Table II
Entry ØZ Ø S Ø Y E
Size +0.25/-0.50 ±0.51 ±0.38 Max.
[+0.010/-0.020] [±0.020] [±0.015]
03 4.75 7.92 11.10 15.8
0.188 0.312 0.438 0.62
04 6.35 9.52 12.70 16.3
0.250 0.375 0.500 0.64
05 7.92 11.12 14.30 16.8
0.312 0.438 0.563 0.66
06 9.52 12.70 15.88 17.8
0.375 0.500 0.625 0.70
07 11.12 14.30 17.50 18.3
0.438 0.562 0.689 0.72
08 12.70 15.88 19.05 19.8
0.500 0.625 0.750 0.78
09 14.30 17.50 20.65 21.3
0.562 0.688 0.813 0.84
10 15.88 19.05 22.23 22.4
0.625 0.750 0.875 0.88
1117.50 20.65 23.80 22.9
0.688 0.812 0.938 0.90
12 19.05 22.23 25.40 23.4
0.750 0.875 1.000 0.92
13 20.65 23.83 27.00 24.4
0.812 0.938 1.063 0.96
14 22.23 25.40 30.16 25.4
0.875 1.000 1.189 1.00
Table II (Continued)
Entry ØZ Ø S Ø Y E
Size +0.25/-0.50 ±0.51 ±0.38 Max.
[+0.010/-0.020] [±0.020] [±0.015]
15 23.83 27.00 31.75 25.4
.0938 1.062 1.250 1.00
16 25.40 28.58 33.34 26.4
1.000 1.125 1.313 1.04
18 28.58 31.75 36.51 27.7
1.125 1.250 1.438 1.09
20 31.75 34.90 39.69 29.2
1.250 1.375 1.563 1.15
22 34.90 38.10 42.86 N/A
1.375 1.500 1.688
24 38.10 41.28 46.83 N/A
1.500 1.625 1.844
26 41.28 44.45 49.61 N/A
1.625 1.750 1.953
28 44.45 47.63 52.78 N/A
1.750 1.875 2.078
30 47.65 50.80 56.36 N/A
1.875 2.000 2.219
32 50.80 54.00 59.53 N/A
2.000 2.125 2.344
34 54.00 57.15 62.71 N/A
2.125 2.250 2.469
Adapter Products
Code 41 MIL-C-38999 Series I and II
6-58 Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
Braided Adapters
Y Dia.
27.2 Max.
[1.07] 152.4 Min.
[6.00]
ZDia.
C
D
Z Dia. [6.00]
152.4 Min.
Y Dia.
[6.00]
152.4 Min.
Y Dia.
Z Dia.
W
E
204M1XX-XXXXX
204M2XX-XXXXX
204M0XX-XXXXX
Table of Dimensions Order Shell Size Max. Entry* A Unified Thread Dimensions
No. Series I Series II Size Type 1 Class 2B CMax. D Max. E Max.
08 9 8 04 .438-28 UNEF 19.8 [0.78] 23.1 [0.91] 29.2 [1.15]
10 11 10 06 .562-24 UNEF 20.3 [0.80] 23.6 [0.93] 30.7 [1.21]
12 13 12 08 .688-24 UNEF 21.1 [0.83] 24.4 [0.96] 32.5 [1.28]
14 15 14 10 .812-20 UNEF 21.6 [0.85] 24.9 [0.98] 34.0 [1.34]
16 17 16 12 .938-20 UNEF 22.4 [0.88] 25.4 [1.00] 35.6 [1.40]
18 19 18 13 1.062-18 UNEF 22.9 [0.90] 26.2 [1.03] 37.1 [1.46]
20 21 20 15 1.188-18 UNEF 23.6 [0.93] 26.9 [1.06] 38.9 [1.53]
22 23 22 16 1.312-18 UNEF 24.4 [0.96] 27.4 [1.08] 40.4 [1.59]
24 25 24 18 1.438-18 UNEF 24.9 [0.98] 28.2 [1.11] 41.9 [1.65]
*For larger than maximum type 1 entry sizes, a two-piece adapter will be supplied.
Contact Tyco Electronics for information.
Available in: Americas Europe Asia Pacific
nnn