PS41-10-4MNB-C-FL18 - GEMS SENSORS

I-9

PRESSURE SWITCHES

Visit www.GemsSensors.com for most current information.

ø1.10˝

(ø28)

ø1.25˝

(ø32)

3/32˝ or

1/8˝ ALLEN

WRENCH

ADJUSTMENT

SCREW

RED, NO.

GREEN, NC.

BLACK, COM.

1.10˝

(28)

DIN

43650A

1.95˝

(50)

DIN 43650A – MALE HALF ONLY

2.20˝

(56)

INGRESS PROTECTION OPTION (IP66)

WITH FLYING LEADS FACTORY SET ONLY

1.58˝

(40)

PRESSURE

PORT

FLYING LEAD

DIN 43650-HNR

1.12˝ AF

(28)

1.78˝

(45)

ADJUSTMENT SCREW

UNDER CAP SCREW

2.80˝

(71)

PRESSURE

PORT

2.14˝

(54)

PS41 – Economical

Miniature Pressure Switches

 3.5 to 100 psi (0.24 to 7 bar)

These miniature pressure switches are designed for demanding applications where

space and/or price are strong concerns. The switches utilize a piston/diaphragm

design, which incorporates the high proof pressure of piston technology with the

sensitivity of diaphragm designs. Switches are ﬁeld adjustable via an Allen head screw

that is hidden to protect against unauthorized tampering.

Speciﬁcations

Switch SPST; SPDT

Repeatability See Table 1

Wetted Parts

Diaphragm Material Nitrile (optional EPDM, Viton® or Neoprene)

Fitting Brass (optional 316 Stainless Steel)

Electrical Termination DIN 43650A IP65; Terminals IP00; Flying Leads IP65;

Option IP: IP66; Conduit with Flying Leads IP65

Proof Pressure 350 psi (24 bar)

Burst Pressure 700 psi (48 bar)

Approvals CE, UL Approved units available

Weight, Approximate Brass: 0.3 lbs. (0.14 kg)

Dimensions

RIGHT ANGLE DIN (HNR)

Options Selected

Diaphragm Material No option,

-10A, -SP or -RD -RD or -RD and -G -SP or -10A

Nitrile 15°F to 185°F

(-9°C to +85°C)

15°F to 250°F

(-9°C to +121°C)

15°F to 212°F

(-9°C to +100°C)

Viton®0°F to 185°F

(-18°C to +85°C)

0°F to 250°F

(-18°C to +121°C)

0°F to 212°F

(-18°C to +100°C)

EPDM -10°F to +185°F

(-23°C to +85°C)

-10°F to +250°F

(-23°C to +121°C)

-10°F to +212°F

(-23°C to +100°C)

Neoprene -10°F to +185°F

(-23°C to +85°C)

-10°F to +250°F

(-23°C to +121°C)

-10°F to +212°F

(-23°C to +100°C)

Note: Switches may function below the cold temperature limit but the set points and deadband will increase.

Consult factory for details.

Options Selected AC DC

No option or -RD 5 amps @ 125/250 Volts 5 amps resistive,

3 amps inductive @ 28 Volts

-G or -RD with -G 1 amp @ 125 Volts 1 amp resistive,

0.5 amp inductive @ 28 Volts

-SP without -G 10.1 amps @ 125/250 Volts —

-SP with -G 2 amps @ 125/250 Volts —

Recommended Operating Temperature Limits

Electrical Switch Ratings

I-10

PRESSURE SWITCHES

Visit www.GemsSensors.com for most current information.

Pressure Range Code Pressure Range Repeatability* Average Deadband**

10 3.5-8 psi (0.24-0.55 bar) ±0.35 psi (0.024 bar) +2% of setting 1.50 psi (0.14 bar) +7% of setting

20 7-30 psi (0.48-2.07 bar) ±0.8 psi (0.055 bar) +2% of setting 3 psi (0.21 bar) +8% of setting

30 25-100 psi (1.7-6.9 bar) ±2.0 psi (0.138 bar) +2% of setting 5 psig (0.28 bar) +10% of setting

* Repeatability and set point of units may change due to the effects of temperature.

** These numbers are for the standard microswitch. With either the -SP or -10A option, the values are typically 20% greater than those

listed. With the -RD option, the values will be typically 25% less than those listed. In certain applications deadband can be tailored

and controlled to customer speciﬁcations. Consult factory for details.

mInIaTURE

Table 1 — Pressure Range Codes

1 Pressure Range Code

Insert Pressure Range Code from Table 1, below.

2 Pressure Fitting1

Brass

-2MNB = 1/8˝ NPTM

-4MNB = 1/4˝ NPTM

-2MGB = 1/8˝ BSPM (G type)

-4MGB = 1/4˝ BSPM (G type)

-4MSB = 7/16˝-20 SAE Male

-6MSB = 9/16˝-18 SAE Male

316 Stainless Steel

-2MNS = 1/8˝ NPTM

-4MNS = 1/4˝ NPTM

-4MGS = 1/4˝ BSPM (G type)

-4MSS = 7/16˝-20 SAE Male

3 Circuit

-A = SPST/N.O.

-B = SPST/N.C.

-C = SPDT

4 Electrical Termination

-SP = Spade Terminals2

-FLXX = Flying Leads3

-FLSXX = Flying Leads w/PVC Shrink Tubing3

-ELXX = 1/2˝ NPT Male Conduit w/Flying Leads4

-CABXX = 18 AWG PVC Cable5

-H = DIN 43650A Male Half Only6

-HR = Right Angle DIN 43650A Male Half Only6

-HC = DIN 43650A 9mm Cable Clamp6

-HCR = Right Angle DIN 43650A 9mm Cable

Clamp6

-HN = DIN 43650A with 1/2˝ Female NPT Conduit6

-HNR = Right Angle DIN 43650A with 1/2˝ Female

NPT Conduit6

5 Options7

-V = Viton® Diaphragm

-N = Neoprene Diaphragm

-E = EPDM Diaphragm

-10A = 10A @ 125/250 VAC Max. Rating

-G = Gold Contacts

(for loads less than 12 mA @ 12 VDC)

-RD = Reduced Differential

(25% reduction typical)

-IP = Ingress Protection8

-OXY = Oxygen Cleaned

-WF = Weather Pack Connector, Female

-WM = Weather Pack Connector, Male

-DE = Deutsch Connector, Male, DT04 Series

6 Fixed Set Point (optional)

A. Specify set point -FS

(in PSI or BAR, see example)9

B. Set Point Actuation

R on Rising Pressure

F on Falling Pressure

Example: -FS0.5BARF for 0.5 BAR Falling

or -FS5PSIR for 5 PSI Rising

Notes:

1. Other ﬁttings available.

Consult factory.

2. Requires -10A or -G option.

(20% increase in deadband

typical)

3. 18˝ is standard. Specify lead

length in inches (max. 48˝).

e.g. -FL18 or -FLS30.

4. 18˝ is standard. Specify lead

length in inches (max. 48˝).

e.g. -EL18 or -EL30.

5. 36˝ is minimum. Specify

cable length in inches. e.g.

-CAB36 or -CAB120.

6. DIN connectors require -C

SPDT circuit.

7. Options -10A, -G or -RD

cannot be combined.

8. Ingress Protection is

available only with -FL, -FLS

or -CAB Electrical

Termination choices.

Ingress Protection requires

Fixed Set Point -FS.

9. Set Point must be within

Pressure Range selected in

Step 1.

PS41 -10 -4MNB -C -H -XX -XXXX

1 2 3 4 5 6

How To Order

Use the Bold characters from the chart below to construct a product code. Please reference Notes.